• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.73-86
• /
• 2004

In order to estimate the post-ingestion bioavailability of heavy metals and to assess the risk of adverse health effects on human exposure to toxic heavy metals, environmental geochemical surveys were undertaken around the Dogok Au-Ag-Cu and the Hwacheon Au-Ag-Pb-Zn mine sites. Human risk assessment of toxic heavy metals was performed with the results of the SBET(simple bioavailability extraction test) analysis for soil and chemical analytical data for crop plant and water. Arsenic and other heavy metals were highly elevated in tailings from the Dogok(218 As mg/kg, 90.2 Cd mg/kg, 3,053 Cu mg/kg, 9,473 Pb mg/kg, 14,500 Zn mg/kg) and the Hwacheon(72 As mg/kg, 12.4 Cd mg/kg. 578 Pb mg/kg, 1,304 Zn mg/kg) mines. These significant concentrations can impact on soils and waters around the tailing dumps. The quantities of As, Cd and Zn extracted from paddy soils in the Hwacheon mine using the SBET analysis were 55.4%, 20.8% and 26.4% bioavailability, respectively, and for farmland soils in the Dogok mine, 40.8%, 37.6% and 33.0% bioavailability, respectively. From the results of human risk assessment, HI(Hazard Index) value exceeded 1.0 for As in the Hwacheon mine and for Cd in the Dogok mine. Thus, toxic risks for As and Cd exist via exposure(ingestion) of contaminated soil, water and rice grain in these mine sites. The cancer risk for As by the consumption of rice and groundwater in the Hwacheon mine area was 8E-4 and 1E-4, respectively. This risk level exceeds the acceptable risk(1 in 100,000) for regulatory purpose. Therefore, regular ingestion of locally grown rice and ground-water by the local population can pose a potential health threat due to long-term arsenic exposure.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.5
• /
• pp.417-422
• /
• 2010

Introduction: Bone density is one of the important factors for the long term success of endosseous implants. The bone density varies from site to site and from patient to patient. A preoperative evaluation of the bone density is quite useful to oral surgeons for planning dental implantation. More accurate information on the bone density will help surgeons identify suitable implant sites, thereby increase the success rate of dental implantation. This study examined the correlation between the bone density measured preoperatively by computed tomography (CT) and the implant primary stability measured by resonance frequency analysis. Furthermore, the effects of the implant sites, gender, age and generalized systemic disorder patients on the bone density and primary implant stability were examined. Materials and Methods: One hundred and fourteen patients were selected. None of the patients had undergone a tooth extraction or bone graft history in the previous year. Preoperatively, the patients underwent CT scanning to evaluate the Hounsfield unit (HU), and resonance frequency analysis (RFA) was used to evaluate the implant primary stability at the time of implant installation. All implants were 4.0 mm diameter and 11.5 mm length US II. All patients were recorded and the HU and implant stability quotient (ISQ) value were evaluated according to the sites, gender and age. Results: The highest HU values were found in the mandibular anterior site ($827.6{\pm}151.4$), followed by the mandibular molar site ($797{\pm}135.1$), mandibular premolar site ($753.8{\pm}171.2$), maxillary anterior site ($726.3{\pm}154.4$), maxillary premolar site ($656.7{\pm}173.8$) and maxillary molar site ($621.5{\pm}164.9$). The ISQ value was the highest in the mandibular premolar site ($81.5{\pm}2.4$) followed by the mandibular molar site ($80.0{\pm}5.7$), maxillary anterior site ($77.4{\pm}4.1$), mandibular anterior site ($76.4{\pm}11.9$), maxillary premolar site ($74.2{\pm}14.3$) and maxillary molar site ($73.7{\pm}7.4$). The mean HU and ISQ value were similar in females and males. (HU: P=0.331, ISQ: P=0.595) No significant difference was also found in the age group respectively. However, the correlation coefficients between the variables showed a closed correlation between the HU and ISQ value. Conclusion: These results showed close correlation between the bone density (HU) and primary stability value (ISQ) at the time of implant installation (Correlation coefficients=0.497, P<0.01). These results strengthen the hypothesis that it might be possible to predict and quantify the initial implant stability and bone density from a presurgical CT diagnosis.

• Journal of Korean Society of Forest Science
• /
• v.81 no.2
• /
• pp.156-163
• /
• 1992

Pinus koraiensis (Pk), P. rigida (Pr) and P. rigida ${\times}$ P. taeda (Pr. t) seedlings in a bare-rooted nursery were artificially inoculated with Pisolithus tinctorius (Pt) and Thelephora terrestris (Tt) to test long term effects of ectomycorrhizal inoculation on host growth. Mycelial inocula of Pt and Tt were mass-cultured in vermiculite-peatmoss mixture and introduced into fumigated nursery soil before seed sowing. Bare-rooted, inoculated seedlings at one to four years of age were outplanted to the field with $P_2O_5$ content of 25 ppm in soil. At the time of outplanting, Pk seedlings(4 years old), Pr seedlings(2 years old), and Pr.t seedlings(1 year old) all infected by Pt were significantly taller by 28%. 26%, and 77%, respectively, than controlled seedlings infected by natural population of mycorrhizal fungi in the non-fumigated plot. Ten years after inoculation or six to nine years after outplanting, Pk seedlings inoculated with Pt were significantly taller by 9% Pr.t seedlings significantly taller by 18%, and Pr slightly Caller by 2%(not significant) than controlled seedlings, suggesting that the stimulatory effect of Pt on host growth gradually declined or became minimal after outplanting. Tt failed to stimulate host growth either in the nursery or in the field, and the survival rate of outplanted seedlings was not different among fungal treatments. Considerable loss of the infected root system during lifting the seedlings for outplanting would be the primary cause of the reduced effect of Pt in the field. Pt infected more than 90% of the fine roots in the fumigated nursery during the first growing season, but Pt assumed to fail to compete successfully with natural population of ectomycorrhizal fungi in the field. It is necessary to select other mycorrhizal fungi which adapt well in both nursery and field.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.2
• /
• pp.159-175
• /
• 2018

The purpose of this study was to identify the factors that could overcome the crisis and adversity of the nursing care provider through understanding the effect of job adaptation on the turnover intention of the nursing care provider and to contribute to the various problems of the nursing care provider in the long term. In order to confirm this as an empirical research task, risk factors and protection factors, general characteristics of the survey subjects, job adaptation and turnover intention were selected, and the risk factors and protective factors of caregivers' As a mediator. So Seoul. The results of the questionnaire survey were as follows: 291 caregivers in the elderly medical welfare facilities in Gyeonggi area. First, as the relationship between the risk factors and protective factors of occupational caregivers and occupational adaptation were more severe, the higher the maladjustment of the workplace culture, the more the job satisfaction and organizational commitment were adversely affected. The emotional support, The higher the information support, the more satisfied and satisfied the job. Second, the relationship between the risk factors of the caregiver and the protective factors and the turnover intention, the higher the conflict of caregivers, the more unstable the workplace, the more difficult it is to adapt to work culture, Respectively. Finally, as a result of verifying the mediating effect of occupational adaptation on the relationship between risk factors and protective factors and turnover intention of caregivers, job satisfaction, which is a sub-factor of job adaptation, It is shown that they play mediating roles only in the relationship between stress and turnover intention, and do not play a mediating role in the relationship between protective factor self - efficacy and social support and turnover intention. In other words, if caregivers feel satisfaction about their job, they can be less stressed on their jobs, improve their self-efficacy, and have a positive attitude toward social support. Also, it was found that the more the caregiver 's immersion into the organization, the less job stress and turnover intention decreased, but the self - efficacy and social support perception were not influenced. Based on this, the director of the facility should strive to stabilize the operation of the facility and provide high-quality services by seeking ways to improve conflict resolution and adaptation to the workplace culture so that nursing care workers can adapt to their work. And it is required to develop active management strategies and institutional support for improving job satisfaction and organizational commitment of caregivers.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.3
• /
• pp.239-253
• /
• 1999

The objective of this study was to determine the effects of various kinds of composts on the change of soil chemical properties in upland soils. Field experiments were conducted in the loam and sandy loam soils. Various kinds of composts such as poultry manure compost(PMC), cow manure compost(CMC), human excrement sludge(HES), and food industrial sludge compost(FISC) were applied annually at rates of 0, 40, and $80Mg\;ha^{-1}$ to soils grown with soybean and maize plants for 4 years during 1994 to 1997. The results of this study were as follows : The continuous application of human excrement sludge decreased soil pH up to 4.4~5.0, while other compost treatments increased soil pH compared with control plot. The EC increased initially and showed their maximum values at 20days after compost application, and then decreased up to 40 days, thereafter kept a certain level. The available phosphorous accumulated at 0~20cm depth in loam soil, and 0~50cm in sandy loam soil. Annual accumulation rates were 17% higher in sandy loam soil than loam soil. The more compost application rates and times, the higher base saturation percentage increased in upland soils. Four year's application at a rate of $80Mg\;ha^{-1}$ per year increased the base saturation percentage to 87~91% compared with 45% at control plot in the loam soil. While in sandy loam soil only three year's application of same rate increased the base saturation percentage to 81~92% compared with 30.4% at control plot. The average annual increasing rate of base saturation percentage at the same application rates of composts were higher in sandy loam soil by 2.0~3.7 times than in loam soil. The application of compost increased the exchangeable Ca, Mg, and K contents of soils by 2, 2~3, and 3~5 times, respectively, compared with the control. The contents of exchangeable canons were high in surface soil. and decreased with increase of soil depths. In the case of heavy metal content, there were no difference at the application of PMC and CMC but Ni. Fe, Zn, Cu was increased a little when the HES applied, and Ni and Cr was increased application with FISC.

• Korean Journal of Organic Agriculture
• /
• v.24 no.4
• /
• pp.969-980
• /
• 2016

This experiment was conducted to assess changes to the chemical properties of soil and applicability in a case of rice cultivation with organic fertilizers. The investigator applied organic fertilizers to rice cultivation for five years to examine changes to the chemical properties of soil and found that the experiment group of organic fertilizers made an ongoing increase in pH, organism content, and available phosphate content annually compared with the control group with no big differences according to the amounts of organic fertilizers used. As for the yield components, there were no statistical differences in the number of spikelets and grain filling rate between the experiment group of organic fertilizers and the control group. The experiment group recorded a higher level in 1,000 seeds weight and yield than the control group. Experiment Group 4 recorded the highest level at 29.11 kg of 1,000 seeds weight. Experiment Groups 3 and 4, which used 222 kg and 267 kg per 10 a, respectively, recorded 576 kg and 572 kg of yield, respectively, which were 4.7% and 4.1% higher than 549 kg of control group, respectively. As for the quality of brown rice, there were no statistical differences in the head rice percentage between the control and experiment group, both of which were in the range of 83.2-85.7%. As for the protein content, Experiment Groups 3 and 4, both of which used a lot of organic fertilizers, were in the range of 6.9-7.1%, which was lower than 7.5% of control group. Those findings indicate that the long-term application of organic fertilizers can improve the chemical properties of soil and increase the yield more than the conventional method of fertilizer application. The findings also suggest that it will be effective to apply 222 kg of organic fertilizers or more per 10 a.

• Journal of Technology Innovation
• /
• v.26 no.3
• /
• pp.37-68
• /
• 2018

Since the 20th century, automobiles, which are the most common means of transportation, have been evolving as the use of electronic control devices and automotive semiconductors increases dramatically. Automotive semiconductors are a key component in automotive electronic control devices and are used to provide stability, efficiency of fuel use, and stability of operation to consumers. For example, automotive semiconductors include engines control, technologies for managing electric motors, transmission control units, hybrid vehicle control, start/stop systems, electronic motor control, automotive radar and LIDAR, smart head lamps, head-up displays, lane keeping systems. As such, semiconductors are being applied to almost all electronic control devices that make up an automobile, and they are creating more effects than simply combining mechanical devices. Since automotive semiconductors have a high data rate basically, a microprocessor unit is being used instead of a micro control unit. For example, semiconductors based on ARM processors are being used in telematics, audio/video multi-medias and navigation. Automotive semiconductors require characteristics such as high reliability, durability and long-term supply, considering the period of use of the automobile for more than 10 years. The reliability of automotive semiconductors is directly linked to the safety of automobiles. The semiconductor industry uses JEDEC and AEC standards to evaluate the reliability of automotive semiconductors. In addition, the life expectancy of the product is estimated at the early stage of development and at the early stage of mass production by using the reliability test method and results that are presented as standard in the automobile industry. However, there are limitations in predicting the failure rate caused by various parameters such as customer's various conditions of use and usage time. To overcome these limitations, much research has been done in academia and industry. Among them, researches using data mining techniques have been carried out in many semiconductor fields, but application and research on automotive semiconductors have not yet been studied. In this regard, this study investigates the relationship between data generated during semiconductor assembly and package test process by using data mining technique, and uses data mining technique suitable for predicting potential failure rate using customer bad data.

• Journal of Korea Water Resources Association
• /
• v.45 no.10
• /
• pp.969-981
• /
• 2012

In this study, we analysed hydrologic variability in quantity and onset of annual maximum flow and low flow by impacts of the different phases of ENSO (El Ni$\tilde{n}$o Southern Oscillation) over the Han River Basin. The results show that annual maximum flow has increased statistically significant about 48.3% of all over the watershed. The onset of annual maximum flow was delayed in the west of the Han River basins and in the east of the basins was likely to be rapid onset. Also, this study shows that 7-day low flow was deceased statistically significant about 26.0% of the total area in the Han River Basin, and onset of 7-day low flow tends to be faster in the upper-middle basins of the Han River. The onset of annual maximum flow shows similar pattern during the CT (Cold tongue)/WP (Warm-pool) El Ni$\tilde{n}$o years, but annual maximum flow appeared less in 89.0% of all basins during the CT El Ni$\tilde{n}$o years. In addition, the onset of 7-day low flow tended to be faster about 17 days on average during the WP El Ni$\tilde{n}$o years, and 72.7% of the basins show significant increase during the CT El Ni$\tilde{n}$o years. Consequently, it was found that the different phases of CT/WP El Ni$\tilde{n}$o have effects on sensitivity to variability in quantity and onset of water resources over the Han River Basin. We expect that the present diagnostic study on hydrological variability during different phases of ENSO will provide useful information for long-term prediction and water resources management.

• Korean journal of communication and information
• /
• v.35
• /
• pp.250-291
• /
• 2006

This study examines the regulatory issues and introduction problems of TV-betting data broadcasts in Korea by in-depth interview with a panel group. TV-betting data broadcast services of card games and horse racing games are widely in use in Europe and other parts of the world. In order to carry out the study, a demo program of TV-betting data broadcast in the OCAP(OpenCableTM Application Platform Specification) system environment, which is the data broadcasting standard for digital cable broadcasts in Korea was exposed to the panel group and then they were interviewed after watching and using the program. The results could be summarized as below. First of all, while TV-betting data broadcasts have many elements of entertainment, the respondents thought that it would be difficult to introduce TV-betting in data broadcasts as in overseas countries largely due to social factors. In addition, in order to introduce TV-betting data broadcasts, they suggested that excessive speculativeness must be suppressed through a series of regulatory system devices, such as by guaranteeing credibility of the media based on safe security systems for transactions, scheduling programs with effective time constraints to prevent the games from running too frequently, limiting the betting values, and by prohibiting access to games through set-top boxes of other data broadcast subscribers. The general consensus was that TV-betting could be considered for gradual introduction within the governmental laws and regulations that would minimize its ill effects. Therefore, the government should formulate long-term regulations and policies for data broadcasts. Once the groundwork is laid for safe introduction of TV-betting on data broadcasts within the boundary of laws and regulations, interactive TV games are expected to be introduced in Korea not only for added functionality of entertainment but also for far-ranging development of data broadcast and new media industries.