• Journal of Life Science
• /
• v.20 no.12
• /
• pp.1889-1895
• /
• 2010

The purpose of this present study was to investigate the effects of long-term treadmill running and aged garlic extract supplementation on weight, adipose tissue mass, lipid profiles and oxidative stress after exhaustion in high fat diet-induced obese rats. Thirty male Sprague-Dawley rats (3 weeks old) were used as subjects. High fat diets were fed to all subjects for 6 weeks in order to induce obesity. The subjects were divided into five groups - N (normal diet group), HD (high fat diet group), E (exercise group), EA (exercise with AGE diet group) and A (AGE diet group). Aerobic exercise was performed through treadmill running and AGE at a dosage of 2.86 kg/g was administered to rats 30 min before every exercise for 4 weeks. After 4 weeks, all groups completed acute treadmill running (speed increasing gradually to 25 m/min, 15% uphill grade) until exhaustion. Immediately after exhaustive treadmill exercise, the weight, adipose tissue mass, lipid profiles and oxidative stress of the rats were assayed. At the end of 6 weeks of high fat diets, body weight and body weight gain were significantly higher in the high fat diet groups than in the normal diet group (p<0.001). At the end of treadmill exercise with AGE intake for 4 weeks, body weight gain, visceral and epididymal fat of the E and EA groups were significantly decreased compared to other groups (p<0.05). There were no significant differences in gastrocnemius and soleus. T-C, HDL-C, TG and LDL-C were not significant in any of the groups. TBARS was significantly lower in the A group than in the E group (p<0.05). These results indicated that body weight gain, visceral and epididymal fat decreased in the E and EA groups, and TBARS levels were lower in the A group than the E group. Regular aerobic exercise intervention with AGE supplementation may also modify the adipose weight and improve the oxidant stress in obese rats.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.3
• /
• pp.465-482
• /
• 2016

Previous researches have introduced various ways to analyze the impact of standardization on innovation while the works are not only small in number but based on interview or case study. This paper addresses the impact of standardization activities within South Korean industries on technological innovation applying an empirical analysis of standardization activities and technological innovation. Drawing on Korean Industrial Standards Classification from panel data of 2003 to 2012, we employed corresponding data of each industrial classification: Number of standards, Accumulated number of standards, Number of patents applied in Korea, Sales, Operational profit, Intangible asset, and R&D invest. In the first model, we run panel data models employing the number of patents applied in Korea as an independent variable, and the number of standards, accumulated number of standards, sales, and operational profit as dependent variables to observe industrial impacts upon the relationship between standards and patents, along with time lagged consideration. The result shows that number of standards are revealed to have a negative influence on patent applications in the year of research, and no significant effect appears for the next two years while positive effect shows up on the third year. Meanwhie, accumulated number of standards turned out to have positive effects on patent applications in Korea. This implies it takes time for innovation subjects to embrace newly established standards while having a significant amount of positive effect on technological innovation in the long term. In the second model, we use canonical correlation analysis to find industrial-wide characteristics. The result of this model is equivalent to the result of panel data analysis except in a few industries, where some industry specific characteristics appear. The implications of our results present that Korean policy makers have to take account of industrial effects on standardization to promote technological innovation.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.193-212
• /
• 2011

Mobile instant messaging service is surfacing to an important keyword in the mobile market together with popularization of Smart phones. Mobile instant messaging service in Korea has become popular to the degree of 87.9% usages from total Smartphone holders, and it is expected that using populations will be more enlarged afterwards if considering a fact that its populations of Smartphone is continuously being increased after exceeding 10 million persons (Trend Monitor, June 2011). In the instant messaging market where competitions have been deepened day by day, raising customer's royalties will be the key for company's business survivals and goals of corporate marketing strategies. It could be said that understanding on which factors affect to customer retentions and royalties is very important. Specially, as changing status is being progressed very quickly in case of innovative mobile services like the instant messaging service, research necessities on how many do consumers use the services after accepting them, how much do consumers use them variously, and whether does it connect to long-term relations have been increased, but studies on such matters are in insufficient situations actually. Therefore, this study examined on which effects were affected to use-diffusion and loyalty factors from perceived customer vales' factors having been occurred after accepting the mobile instant messaging service, namely 'functional value', 'monetary value', 'emotional value', and 'social value'. Also, the study looked into what kind of roles do the service usage and using variety play to service's continued using intents as a loyalty index, recommending intents to others, and brand switching intents. And then the study laid the main purpose in trying to provide implications for enhancing customer securities and royalties on the mobile instant messaging service through research's results. The research hypotheses are as follows; H1: Perceived values will affect influences to royalties. H2: Use-Diffusion will affect influences to loyalty. H3: Perceived value will affect influences to loyalty. H4: The use-diffusion will play intermediating roles between perceived values and loyalty. Total 276 cases among collected 284 ones were used for the statistical analysis by SPSS ver. 15 package. Reliability, Factor analysis, regression were done. As the result of research, 'monetary value' and 'emotional value' affected to 'usage' among perceived value factors, and 'emotional value' was appeared as affecting the largest influence. Besides, the usage affected to constant-using intents and recommending intents to others, and using varieties were displayed as affecting to recommending intents to others. On the other hand, 'Using' and 'Using diversity' were appeared as not affecting to 'brand switching intentions'. Meanwhile, as the result of recognizing about effects of perceived values on the loyalty, it was appeared such like 'continued using intents' affected to'functional value', 'monetary value', and 'social value' first, and also 'monetary value', 'emotional value', and 'social value' affected to 'recommending intents to others'. On the other hand, it was shown such like only 'social value' affected influences to 'brand switching intents', and thus contrary results with the factor 'constant-using intents' were displayed. So, it seems that there are many applications to service provides who are worrying about marketing strategies for making consumer retains (constant-using) and new consumer's inductions (brand-switching intents). Finally, as a result of looking into intermediating roles of the use-diffusion factor in relations between conceived values and royalties at hypothesis 4, 'using' and 'using diversity' were displayed as affecting significant influences all together. Regarding to research result's implications, for expanding and promoting continued uses of the mobile instant messaging service by service providers: First, encouraging recognitions on the perceived value connected to users' service usage are necessary. Second, setting up user's use-diffusion strategies are required so as to enhance the loyalty after understanding a fact that use-diffusion patterns affecting to the service's loyalty are different. Finally, methods of raising customer loyalties and making constant relationships have to be grouped by analyzing on what are the customer value's factors that can satisfy users in competitive alterations.

• Food Science and Preservation
• /
• v.23 no.3
• /
• pp.438-444
• /
• 2016

This study was performed to determine the optimal freezing point for the reliable cold storage of Korean agricultural products, and to provide basic data for determining the storage temperature based on the quality characteristics. Additional supercooling temperature analysis was conducted to explore the possibility of supercooling storage. To determine the effects of quality characteristics on the freezing point, the hardness, acidity, moisture and sugar content were analyzed. The crops were frozen using customized cooling unit and their freezing and supercooling points were determined based on their heat release points. The freezing temperatures of garlic, leek, cucumber, hot pepper, grape, oriental melon, netted melon, peach, cherry tomato, plum, daikon, sweet persimmon, apple, sweet potato, mandarin, pear, and strawberry were -1.6, -0.5, -0.5, -0.7, -1.6, -1.6, -1.3, -0.8, -0.3, -1.1, -0.3, -1.7, -1.5, -1.5, -0.8, -1.5, and -$0.9^{\circ}C$, respectively; otherwise, supercooling points were -7.8, -3.7, -3.3, -4.9, -5.7, -4.6, -2.8, -3.3, -5.9, -4.2, -0.8, -4.7, -3.2, -3.7, -4.7, -4.2, and -$3.4^{\circ}C$, respectively. These results suggest that the ideal freezing temperature of crops could be estimated through freezing point depression because of their sugar content, and this technique should be used to maintain an optimum storage temperature. However, cold storage is complicated and further study is required because of the effects of long-term cold storage on the crops.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.3
• /
• pp.80-92
• /
• 2007

Forest fire is the dominant large-scale disturbance mechanism in the Korean temperate forest, and it strongly influences forest structure and function. Moreover burn severity incorporates both short- and long-term post-fire effects on the local and regional environment. Burn severity is defined by the degree to which an ecosystem has changed owing to the fire. Vegetation rehabilitation may specifically vary according to burn severity after fire. To understand burn severity and process of vegetation rehabilitation at the damaged area after large-fire is required a lot of man powers and budgets. However the analysis of burn severity in the forest area using satellite imagery can acquire rapidly information and more objective results remotely in the large-fire area. Space and airbone sensors have been used to map area burned, assess characteristics of active fires, and characterize post-fire ecological effects. For classifying fire damaged area and analyzing burn severity of Samcheok fire area occurred in 2000, Cheongyang fire in 2002, and Yangyang fire in 2005 we utilized Normalized Burn Ratio(NBR) technique. The NBR is temporally differenced between pre- and post-fire datasets to determine the extent and degree of change detected from burning. In this paper we use pre- and post-fire imagery from the Landsat TM and ETM+ imagery to compute the NBR and evaluate large-scale patterns of burn severity at 30m spatial resolution. 65% in the Samcheok fire area, 91% in the Cheongyang fire area and 65% in the Yangyang fire area were corresponded to burn severity class above 'High'. Therefore the use of a remotely sensed Differenced Normalized Burn Ratio(${\Delta}NBR$) by RS and GIS allows for the burn severity to be quantified spatially by mapping damaged domain and burn severity across large-fire area.

• Tuberculosis and Respiratory Diseases
• /
• v.59 no.6
• /
• pp.644-650
• /
• 2005

Background : Bilateral pulmonary thromboendarterectomy(PTE) is recognized as the definitive treatment for chronic thromboembolic pulmonary hypertension (CTEPH). We investigated the symptomatic, hemodynamic and prognostic effects of PTE in comparison with medical treatment. Methods : Twenty-four patients diagnosed with CTEPH from 1995 to 2003 at the Asan Medical Center were divided into two groups: patients treated with PTE(PTE group, n=12) and those not treated with PTE(Med group, n=12). The serial changes in dyspnea, the tricuspid regurgitation maximal velocity (TRVmax) and survival of the PTE and Med groups were compared retrospectively. Results : In PTE group, during a follow-up period of 1 year, the New York Heart Association(NYHA) functional class significantly improved, while there was no significant improvement in the Med group. PTE significantly lowered the TRVmax from $4.23{\pm}0.54m/sec$ to $3.22{\pm}0.70m/sec$ over a follow up period of 2 years. (p=0.028) However, the TRVmax in the medically treated group did not show any significant improvement, changing from $3.98{\pm}0.68m/sec$ to $4.27{\pm}0.95m/sec$ during 1 year. The 5-year survival of the PTE group was 77.9% compared with 64.3% in the medically treated group. Conclusion : PTE provides substantial long-term improvement in dyspnea and the echocardiographic changes compared with medically treated patients.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.165-176
• /
• 2014

Purpose: The effects of desensitizing agent are often for a short duration. One of the reasons is believed to be wear of desensitizing agent by tooth brushing. To reduce the wear and make the duration longer, dental bonding resin was applied and the changes of dentin permeability after toothbrushing were measured. Materials and methods: Extracted teeth free from caries were chosen. Coronal dentin discs with thickness of 1 mm were prepared. Using the split chamber device developed by Pashely, hydraulic conductance and scanning electron microscope images (SEM) were compared and contrasted before and immediately after the application of desensitizing agent and bonding resin and then after equivalent tooth brushing of 1 week, 2 weeks, and 6 weeks. Four commercially available desensitizing agents were used in this study; they were All-Bond 2, Seal & Protect, Gluma, and MS Coat. And Dentin/Enamel Bonding resin (Bisco Inc.) was used. The results of this study are as follows. Results: On all specimens, the hydraulic conductance decreased after the application of tooth desensitizing agent and bonding resin. Compared with the specimens treated only with desensitizer, the specimens treated with All-Bond 2, Gluma, MS Coat and plus D/E bonding resin had a little increase in hydraulic conductance after 1, 2 and 6-week tooth brushing. In case of Seal & Protect, the specimens showed the same result only after 6-week tooth brushing. On examination of SEM, the dentinal tubule diameter had decreased after treatment of desensitizing agents and bonding resin. And the specimens treated with All-Bond2, Seal&Protect, Gluma, MS Coat and plus D/E bonding resin had an significant decrease in diameter of dentinal tubule after 6-week tooth brushing. Conclusion: According to the results of this study, it is effective to use bonding resin after application of desensitizer in reducing the wear by tooth brushing and making the duration longer. In this study, just 6-week tooth brushing was performed, and it is not enough to regard it as a long-term data. So further study is needed and more perfect method for treating dentin hypersensitivity should be developed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.474-480
• /
• 2004

The purpose of this in vitro study was to compare the remineralizing effects of three glass ionomer cements (high filled glass ionomer cement, compomer, resin modified glass ionomer cement) with resin composite (control group) on incipient interproximal caries, and to assess long-term change of remineralization effect, in each material, evaluated by microtomography. Proximal restoration was simulated with tooth specimen and Glass Ionomer Cements. And each of these groups was placed into a closed container with artificial saliva at $37^{\circ}C$ and pH 7.0 for a time period of thirty days with constant circulation. At the end of thirty and sixty days, tomographic images were taken from these specimens with micro CT scanner. Materials used in this study were as follows. Group 1: Fuji IX GP (GC Corp., Tokyo, Japan) Group 2: Vitremer (3M ESPE, St. Paul, Minn., USA) Group 3: F2000 (3M ESPE, St. Paul, Minn., USA) Group 4: Z250 (3M ESPE, St. Paul, Minn., USA) Using density-measuring program, the micro-density of carious lesions on the specimens were measured. The mean density changes of each group were compared to the other groups to evaluate the effect of remineralization. The results were as follows: 1. The lesion density of all groups increased. 2. The mean density increase of Group 1, 2, 3 were higher than that of Group 4 every month(p<0.05). 3. There were significant differences of density increase among glass ionomer group(Group 1, 2, 3).

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.63-64
• /
• 1996

The nature of distant faint blue field galaxies remains a mystery, despite the fact that much attention has been devoted to this subject in the last decade. Galaxy counts, particularly those in the optical and near ultraviolet bandpasses, have been demonstrated to be well in excess of those expected in the 'no-evolution' scenario. This has usually been taken to imply that galaxies were brighter in the past, presumably due to a higher rate of star formation. More recently, redshift surveys of galaxies as faint as B$\~$24 have shown that the mean redshift of faint blue galaxies is lower than that predicted by standard evolutionary models (de-signed to fit the galaxy counts). The galaxy number count data and redshift data suggest that evolutionary effects are most prominent at the faint end of the galaxy luminosity function. While these data constrain the form of evolution of the overall luminosity function, they do not constrain evolution in individual galaxies. We are carrying out a series of observations as part of a long-term program aimed at a better understanding of the nature and amount of luminosity evolution in individual galaxies. Our study uses the luminosity-linewidth relation (Tully-Fisher relation) for disk galaxies as a tool to study luminosity evolution. Several studies of a related nature are being carried out by other groups. A specific experiment to test a 'no-evolution' hypothesis is presented here. We have used the AUTOFIB multifibre spectro-graph on the 4-metre Anglo-Australian Telescope (AAT) and the Rutgers Fabry-Perot imager on the Cerro Tolalo lnteramerican Observatory (CTIO) 4-metre tele-scope to measure the internal kinematics of a representative sample of faint blue field galaxies in the red-shift range z = 0.15-0.4. The emission line profiles of [OII] and [OIII] in a typical sample galaxy are significantly broader than the instrumental resolution (100-120 km $s^{-l}$), and it is possible to make a reliable de-termination of the linewidth. Detailed and realistic simulations based on the properties of nearby, low-luminosity spirals are used to convert the measured linewidth into an estimate of the characteristic rotation speed, making statistical corrections for the effects of inclination, non-uniform distribution of ionized gas, rotation curve shape, finite fibre aperture, etc.. The (corrected) mean characteristic rotation speed for our distant galaxy sample is compared to the mean rotation speed of local galaxies of comparable blue luminosity and colour. The typical galaxy in our distant sample has a B-band luminosity of about 0.25 L$\ast$ and a colour that corresponds to the Sb-Sd/Im range of Hub-ble types. Details of the AUTOFIB fibre spectroscopic study are described by Rix et al. (1996). Follow-up deep near infrared imaging with the 10-metre Keck tele-scope+ NIRC combination and high angular resolution imaging with the Hubble Space Telescope's WFPC2 are being used to determine the structural and orientation parameters of galaxies on an individual basis. This information is being combined with the spatially resolved CTIO Fabry-Perot data to study the internal kinematics of distant galaxies (Ing et al. 1996). The two main questions addressed by these (preliminary studies) are: 1. Do galaxies of a given luminosity and colour have the same characteristic rotation speed in the distant and local Universe? The distant galaxies in our AUTOFIB sample have a mean characteristic rotation speed of $\~$70 km $s^{-l}$ after correction for measurement bias (Fig. 1); this is inconsistent with the characteristic rotation speed of local galaxies of comparable photometric proper-ties (105 km $s^{-l}$) at the > $99\%$ significance level (Fig. 2). A straightforward explanation for this discrepancy is that faint blue galaxies were about 1-1.5 mag brighter (in the B band) at z $\~$ 0.25 than their present-day counterparts. 2. What is the nature of the internal kinematics of faint field galaxies? The linewidths of these faint galaxies appear to be dominated by the global disk rotation. The larger galaxies in our sample are about 2"-.5" in diameter so one can get direct insight into the nature of their internal velocity field from the $\~$ I" seeing CTIO Fabry-Perot data. A montage of Fabry-Perot data is shown in Fig. 3. The linewidths are too large (by. $5\sigma$) to be caused by turbulence in giant HII regions.

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.311-322
• /
• 2012

Restoration materials used to investigate effects of fluorine such as enamel strengthening and anti-caries effects in several types of dental restoration materials were five kinds including Ionoseal(VOCO GmbH, Cuxhaven, Germany), Fuji Filling LC(GC Co. Tokyo, Japan), Quadrant Universal LC(CAVEX Holland BV, Netherlands), PermaCem$^{(R)}$(DMG, Hamburg, Germany) and Dyract$^{(R)}$ AP(Dentsply GmbH, Germany), and the amount of fluorine-releasing was measured with ICS-5000 Reagent-FreeTM Ion Chromatography(RFICTM, Dionex, U.S.A.). The results of this study are as follows. 1. In all types of restoration materials, the amount of fluoride-releasing was reduced with time passage and it was declined sharply to show significance in four weeks. Fuji Filling LC(12.445PPM) or resin-reinforced glass ionomer and PermaCem$^{(R)}$(16.121PPM) or compomer were found to release fluorine for a long term(P<.001). 2. Ionoseal(0.887PPM) or glass ionomer and Quadrant Universal LC(0.957PPM) or composite resin released a few fluorine of 1PPM or less than 1PPM after one week, and Dyract$^{(R)}$ AP or compomer released fluorine of 8.631PPM in one week and its amount of releasing decreased dramatically in two and four week by recording 0.175PPM and 0.116PPM, respectively. Therefore, the effect of releasing fluorine in four weeks was observed to be poor (P<.001). 3. Fuji Filling LC or resin-reinforced glass ionomer and PermaCem$^{(R)}$ or compomer released fluorine of 33.372 and 1.902PPM, respectively in one week and their amount of releasing increased to be 36.371 and 18.223PPM, respectively in two weeks. So, their amount of fluorine-releasing recorded the highest levels in two weeks(P<.001).