• 한국강구조학회 논문집
• /
• 제18권5호
• /
• pp.633-642
• /
• 2006

연속 강합성 교량에 종방향 프리스트레스를 도입해야 하는 프리캐스트 바닥판을 적용하기 위해서는 균열제어를 위한 사용성 설계가 이루어져야 한다. 특히, 2거더 교량의 경우에는 장지간 바닥판의 설계에서 요구되는 주철근 및 횡방향 프리스트레스와 합성설계를 위해 요구되는 전단포켓의 존재로 인해서 상세가 복잡해지게 된다. 이 논문에서는 2거더 연속강합성 교량의 프리캐스트 바닥판 채용을 위해서 필요한 유효 프리스트레스 크기의 산정과 상세의 단순화를 이루기 위해서 부착강도를 인정할 수 있는 채움재료의 선정 및 그 기준을 제시하였다. 또한, 장기거동에 대한 평가 방안을 제시하고 그 결과로부터 초기 프리스트레스의 크기 결정을 수행하여 기존의 설계의 개선 정도를 평가하였다. 일정 수준이상의 부착강도를 갖는 채움재료를 부모멘트가 크게 발생하는 영역에 사용하면 연속 강합성 교량의 전구간에 걸쳐서 일정한 종방향 프리스트레스 도입이 가능하고 이로 인해 상세의 단순화 및 경제성을 높일 수 있다.

• 한국산학기술학회논문지
• /
• 제10권6호
• /
• pp.1275-1280
• /
• 2009

최근 교량설계에서 외부 프리스트레스를 도입한 장지간 및 효율적인 단면활용 등과 같은 연구가 활발하게 진행되고 있다. 강구조물에 프리스트레스를 도입하면 큰 하중에서 탄성변형의 극한값이 증가하게 되어, 강재량을 줄일 수 있고, 비용의 측면에서 경제성이 있는 것으로 평가 되었다. 이러한 이유 때문에 우리나라에서도 최근 가설교량 시공시 프리스트레스를 도입하여 응력보정 및 처짐보정이 가능하고, 비교적 작은 단면으로 장지간 교량을 시공할 수 있어 통수단면을 충분히 할 수 있는 여러 가지 공법이 개발되고 있다. 따라서 본 논문에서는 가설 강교량에 프리스트레스 도입방법 및 고강도 텐던의 배치에 따른 영향, 강판과 고강도 텐던의 복합구조에 대한 효과를 기존 가설공법과 비교하여 검증 하고자 한다.

• Smart Structures and Systems
• /
• 제33권2호
• /
• pp.93-103
• /
• 2024

Despite the rapid development of sensors, structural health monitoring (SHM) still faces challenges in monitoring due to the degradation of devices and harsh environmental loads. These challenges can lead to measurement errors, missing data, or outliers, which can affect the accuracy and reliability of SHM systems. To address this problem, this study proposes a classification method that detects anomaly patterns in sensor data. The proposed classification method involves several steps. First, data scaling is conducted to adjust the scale of the raw data, which may have different magnitudes and ranges. This step ensures that the data is on the same scale, facilitating the comparison of data across different sensors. Next, informative features in the time and frequency domains are extracted and used as input for a deep neural network model. The model can effectively detect the most probable anomaly pattern, allowing for the timely identification of potential issues. To demonstrate the effectiveness of the proposed method, it was applied to actual data obtained from a long-span cable-stayed bridge in China. The results of the study have successfully verified the proposed method's applicability to practical SHM systems for civil infrastructures. The method has the potential to significantly enhance the safety and reliability of civil infrastructures by detecting potential issues and anomalies at an early stage.

• 한국안전학회지
• /
• 제17권3호
• /
• pp.102-106
• /
• 2002

The Act on Safety Management of Social Assets was established on 1995 and revised on 1999 to relieve maintenance cost of managing offices. The provision for load bearing test before opening was deleted and the number of load bearing test after opening was reduced in the Revised Act on 1999. The effect of revision is the main concern in this study. 176 technical reports on load bearing test of long span bridges are analyzed. The results show that various structural defects are inherent in recent bridges constructed since 1995. So the preservation of provisions deleted in original act is needed up to now.

• 한국안전학회지
• /
• 제14권4호
• /
• pp.148-157
• /
• 1999

Dynamic structural behavior in long span bridges, especially cable structures, is very sophisticated due to their flexibility and structural members are sequentially erected in each construction step. In this study, the consistent mass matrix for dynamic analysis is formulated and computational program considering construction sequences is developed where structural members can be builded or removed by command language and automatically reanalyzed in the moment when structural system is changed. The dynamic analysis, i.e. eigenvalue and time series analysis and the geometrically nonlinear analysis considering construction sequence are conducted to the Namhae Bridge. The analytical results are satisfactory compared with measuring values and the developed computational program can successfully be applied to design and safety check.

• Coupled systems mechanics
• /
• 제7권3호
• /
• pp.269-280
• /
• 2018

Post-earthquake damages investigation in past and recent earthquakes has illustrated that the ground motion spatial variation plays an important role in the structural response of long span bridges. For the structural control of seismic-induced vibrations of cable-stayed bridges, it is extremely important to include the effects of the ground motion spatial variation in the analysis for design of an effective control system. The feasibility and efficiency of different vibration control strategies for the cable-stayed bridge under multiple support excitations have been examined to enhance a structure's ability to withstand earthquake excitations. Comparison of the response due to non-uniform input ground motion with that due to uniform input demonstrates the importance of accounting for spatial variability of excitations. The performance of the optimized designed control systems for uniform input excitations gets worse dramatically over almost all of the evaluation criteria under multiple-support excitations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.245-246
• /
• 2009

일반적으로 경량콘크리트는 구조물의 자중을 줄일 수 있는 장점 때문에 부재단변의 축소 및 시공 의 간편화를 이룰 수 있어 장경간 교량 및 초고층 건물 등에 적용하여 시공비용을 절감함 수 있는 효과가 있다. 그러나 경량골재는 골재자체의 특성상 콘크리트 제조시 굳지 않은 상태에서 재료분리를 일으킬 수 있다. 따라서, 본 연구에서는 경량골재를 자기충전콘크리트 배합설계에 적용하였으며, 역학적 특성과 탄산화에 대하여 검토하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.601-608
• /
• 2003

A new type of bridge superstructures referred to as Steel-confined Prestressed Concrete Girder (SCP Girder) was developed, which is composed of concrete, steel plate, and prestressing tendon. The girder may maximize structural advantages of these components : thus, long span bridges with low height girder may be constructed. For the effective design and fabrication of the girder, the design software program was developed and the process of fabrication established. The experimental girder designed using the program was manufactured in actual size to confirm the fabric ability of the girder. Propriety of design, structural safety, and applicability of the girder were verified through the load test.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.21-32
• /
• 2003

Developments and applications of the structural health monitoring (SHM) systems have become active particularity for long-span bridges in Korea. They are composed of sensors, data acquisition system, data transmission system, information processing, damage assessment, and information management. In this paper, current status of research and application activities on SHM systems for civil infra-structures in Korea are briefly introduced by 4 parts: (1) current status of bridge monitoring systems on existing and newly constructed bridges, (2) research and development activities on smart sensors such as optical fiber sensors and piezo-electric sensors, (3) structural damage detection methods using measured data, and (4) a test road project for pavement design verification and enhancement by the Korea Highway Corporation. Finally the R＆D activities of a new engineering research center entitled Smart Infra-Structure Technology Center at Korea Advanced Institute of Science and Technology are also briefly described.

• Wind and Structures
• /
• 제7권1호
• /
• pp.29-40
• /
• 2004

This study has focused on aerodynamics for a wind-resistance design about the single and tandem box girder sections to realize a super-long span bridge in the near future. Three-dimensional static analysis of flows around the fundamental single and tandem box girder sections with fairing is carried out by means of the IBTD/FS finite element technique with LES turbulence model. As the results of the analysis, computations have verified aerodynamic characteristics of both sections by the histories of aerodynamic forces, the separation and reattachment flow patterns and the surface pressure distributions. The relationship between the section shapes and the aerodynamic characteristics is also investigated in both sections. And the mechanism about the generation of fluctuating aerodynamic forces is discussed.