• 동위원소회보
• /
• 제20권3호
• /
• pp.73-74
• /
• 2005

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 춘계총회 및 연구발표회 초록집
• /
• pp.36.3-36.3
• /
• 2004

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권1호
• /
• pp.10-17
• /
• 2000

Recently, as the field of cyclotron application is to be wider, to inject the beam whree the user want to is getting more important. But since it is not the easy way to describe the model equation of cyclotron, it could be operated by only operator's experiences. In this paper, we suggest the cyclotron controller using the fuzzy logic and the genetic algorithm. The proposed controller was verified in useful by applying to the cyclotron's beam line. In the experiment the measured results were obtained by VXIbus and the control algorithm was performed by LabWindows/CVI.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권4호
• /
• pp.261-268
• /
• 1999

Laser-induced thermochemical etching has been recognized as a new powerful method for processing a variety of materials, including metals, semiconductors, ceramics, insulators and polymers. This study presents characteristics of direct etching for Si substrate using focused argon ion laser beam in aqueous KOH and $CCl_2F_2$ gas. In order to determine process conditions, we first theoretically investigated the temperature characteristics induced by a CW laser beam with a gaussian intensity distribution on a silicon surface. Major process parameters are laser beam power, beam scan speed and reaction material. We have achieved a very high etch rate up to $434.7\mum/sec$ and a high aspect ratio of about 6. Potential applications of this laser beam etching include prototyping of micro-structures of MEMS(micro electro mechanical systems), repair of devices, and isolation of opto-electric devices.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.91-94
• /
• 1999

A new type of high-T$_c$ superconducting Josephson junctions has been prepared by Ar ion beam etching and electron beam lithography. YBa$_2Cu_3O_{7-x}$ (YBCO) films deposited on (001) SrTiO$_3$ single crystal substrate by pulsed laser deposition were patterned by Ar ion milling with photolithography. The narrow slit with a electroresist mask, about 1000 ${\AA}$ wide, was constructed over a 3 ${\sim}$ 5 ${\mu}$m bridge of a 1200-${\AA}$-thick YBCO film by electron beam lithography. The slit was then etched by the Ar ion beam to form a damaged 600-${\AA}$-thick YBCO. Thus prepared structure forms an S-N-S (YBCO - damaged YBCO - YBCO) type Josephson junctions. Those junctions exhibit RSI-like I-V characteristics at 77 K. The properties of the Josephson junctions such as I$_c$ R$_N$, and J$_c$ were characterized.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.370-370
• /
• 2007

The liquid crystal (LC) aligning capabilities treated on the Organic overcoat thin film surfaces by ion beam irradiation and rubbing method was successfully studied for the first time. The Organic overcoat layer was coated by spin-coating. In order to characterize the LC alignment, the microscope, pretilt angle, thermal stress, and atomic force microscopy (AFM) image was used. The good LC aligning capabilities treated on the Organic overcoat thin film surfaces with ion beam exposure of $45^{\circ}$ above ion beam energy density of 1200 eV can be achieved. But, the alignment of defect of NLC on the Organicovercoat surface at low energy density of 600 eV was measured. The pretilt angle of NLC on the Organic overcoat thin film surface with ion beam exposure of $45^{\circ}$ for 1 min at energy density of 1800eV was measured about 1.13 degree. But, low pretilt angles of NLC on the Organic overcoat thin film surface with ion beam exposure at energy density of 600, 1200, 2400, and 3000 eV was measured. Also, the pretilt angle of NLC on the rubbed Organic overcoat thin film surfaces was measured about 0.04 degrees. Finally, the good thermal stability of LC alignment on the Organic overcoat thin film surface with ion beam exposure of $45^{\circ}$ for 1 min can be measured.

• E2M - 전기 전자와 첨단 소재
• /
• 제7권2호
• /
• pp.100-106
• /
• 1994

A bilayer film consisting of a layer of a-Se$_{75}$ Ge$_{25}$ with a surface layer of silver -100[.angs.] thick and a monolayer film of a-Se$_{75}$ Ge$_{25}$ are irradiated with 9[keV] Ga$^{+}$ ion beam. The Ga$^{+}$ ion (10$^{16}$ [ions/cm$^{2}$] exposed a-Se$_{75}$ Ge$_{25}$ and Ag/a-Se$_{75}$ Ge$_{25}$ thin films show an increase in optical absorption, and the absorption edge on irradiation with shifts toward longer wavelength. The shift toward longer wavelength called a "darkening effect" is observed also in film exposure to optical radiation(4.5*10$^{20}$ [photons/cm$^{2}$]). The 0.3[eV] edge shift for ion irradiation films is about twice to that obtained on irradiation with photons. These large changes are primarily due to structural changes, which lead to high etch selectivity and high sensitivity.

• 식물조직배양학회지
• /
• 제27권2호
• /
• pp.109-115
• /
• 2000

배양 중인 담배의 약과 캘러스, 그리고 종자에 중이온 ($^{14}$ N 또는 $^{20}$ Ne) beam을 조사하여 중이온 beam 조사가 약의 반응, 캘러스의 생장, 종자의 발아와 초기 생장에 미치는 영향을 조사하였다. 중이온 beam을 조사하기 전 10일간 preculture한 다음 beam을 조사한 약은 $^{14}$ N, $^{20}$ Ne 모두 20Gy 이상의 선량에서 캘러스 또는 신초유도가 없이 고사하였다. 배양 중인 캘러스는 $^{14}$ N 와 $^{20}$ Ne 이온 beam의 조사로 상대생장율이 감소하였고, 중이온 beam 조사 2주 후부터는 50 Gy 이상 선량 처리구에서 심하게 갈변하였다. 종자에 미치는 중이온 beam 조사의 영향으로 수분을 처리한 후 또는 수분 처리 없이 beam을 조사한 종자 모두에서 선종에 관계없이 선량이 증가함에 따라 발아를 지연시키며 유묘의 초기 생장을 억제하였다. 또한 수분을 흡수시킨 후 중이온 beam을 조사한 경우가 수분을 흡수시키지 않고 beam을 조사한 경우 보다 종자의 발아를 심하게 억제시켰다. 건조 상태의 종자에 중이온 beam을 조사한 경우 피조사체들의 특성과 생장의 초기단계에서 형태적 변이체를 검토하는데는 여과지를 이용한 방법보다 기내에서 배양하는 방법이 보다 효과적이었다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2005년도 추계학술대회 논문집
• /
• pp.64-68
• /
• 2005

In this study, the smoke flows of the inner subway station were visualized through a numerical analysis and visualization experiment in the subway fire. A transparent acrylic model was designed and installed as 1:25th scale-down as the actual subway station by using geometrical similarity The properties of subway fire were reconstructed according to Densimetric Froude Similarity. The 47 to 53 ratio of the mixed air and Helium was inputted in the inner acrylic model to describe 1MW fire intensity with reference to the experiment paper. For the same time, the fire smoke from a smoke generator was inputted in the inner acrylic model with the mixture. At this time, the buoyancy effect of Helium gas went up the smoke to the acrylic model. When the sheet beam of Ar-lon laser was given out to the top and stair of subway model, the digital camcorder took the images of the scattered cluster of smoke particles when applying the smoke management system and PSD.

• KSBB Journal
• /
• 제17권3호
• /
• pp.235-240
• /
• 2002

친수성 표면을 만들기 위하여 산소분위기에서 1 keV의 에너지를 갖는 아르곤 이온빔을 폴리프로필렌 담체의 표면에 조사하였다. 삼차 증류수에 대한 접촉각은 개질 전의 $78^{\circ}$에서 최적의 조건에서 $22^{\circ}$까지 감소하였다. 이온 보조 반응 후의 친수성 증가는 ether, carbonyl, carboxyl 등의 새로 형성된 작용기에 의한 것이며 극성 용매에 대한 안정성이 우수하므로 활성화된 표면이 폐수 내에서도 안정하다. 활성화된 폴리프로필렌 담체를 합성폐수내의 유기물을 제거하기 위한 bio-film공정에 적용하였다. 이온 보조 반응법으로 친수성 표면으로 개질된 PP 담체는 극성 용매내에서 극성작용기가 유지되었으므로 안정된 표면 특성을 이용하여 박테리아 부착의 생물막 공정에 대한 연구를 수행하여 미생물의 부착은 표면의 염기성 극성작용기에 의하여 증진됨을 확인하였다. 합성폐수에 대한 처리 효율은 30%까지 증가 하였으며 장시간에 걸친 COD 농도 감소 효과를 나타내었으므로 이온 보조 반응법에 의하여 처리된 PP고분자를 수질 개선용의 담체로 사용하여 처리효율을 증가시킬 수 있음을 확인하였다.