• Journal of Practical Engineering Education
• /
• v.6 no.1
• /
• pp.9-14
• /
• 2014

The purpose of this research is to introduce a case study on application of practical engineering. Topic of the study is a medicine vending machine which consists of PLC (Programmable Logic Controller), DC motor, switch, photo sensor and so on. In order to design and manufacture of the device, a lot of subjects which have learned during school year are reviewed and practiced. Especially, not only internal process but mechanical mechanism can be understood by organizing hardware and software of all parts. Also, several ideas like user made supply or exact counting are suggested for high performance. From this case study, students can increase their originality and adaptability for related industry. Also, the technique can be initiated industry if needed.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.308-312
• /
• 2002

In this paper, EPLD(Erasable Programmable Logic Device) based induction motor drives with a SRP-PWM(Separatley Randomized Pulse Position PWM) is proposed. In the proposed RPWM (Random PWM), each of three phase pulses is located randomly in each switching interval. Based on the space vector modulation technique, the duty ratio of the pulses is calculated. To verify the validity of the proposed RPWM, the experimental study was tried. Along with the randomization of PWM pulses, the space vector modulation is also executed in the TMS320C31 DSP(Digital Signal Processor). The experimental results show that the voltage and switching noise harmonics are spread to a wide band area. Also, the performance of the proposed SRP-PWM and the conventional SVM-PWM are nearly the same from the viewpoing of the v/f constant control.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.4 no.2
• /
• pp.165-171
• /
• 2004

Robots will be able to coexist with humans and support humans effectively in near future. One of the most important aspects in the development of human-friendly robots is to cooperation between humans and robots. In this paper, we proposed a method for multi-object identification in order to achieve such human-centered system and robot localization in intelligent space. The intelligent space is the space where many intelligent devices, such as computers and sensors, are distributed. The Intelligent Space achieves the human centered services by accelerating the physical and psychological interaction between humans and intelligent devices. As an intelligent device of the Intelligent Space, a color CCD camera module, which includes processing and networking part, has been chosen. The Intelligent Space requires functions of identifying and tracking the multiple objects to realize appropriate services to users under the multi-camera environments. In order to achieve seamless tracking and location estimation many camera modules are distributed. They causes some errors about object identification among different camera modules. This paper describes appearance based object representation for the distributed vision system in Intelligent Space to achieve consistent labeling of all objects. Then, we discuss how to learn the object color appearance model and how to achieve the multi-object tracking under occlusions.

• Journal of KIISE:Software and Applications
• /
• v.34 no.6
• /
• pp.530-538
• /
• 2007

Most existing deductive engines study for optimization of TBox based on Tableaux algorithm. However, in order to deduce mass-storing ABox in reality, it can't be decided in finite time. Therefore, for the efficiency of the deductive engine, there needs to be reasoning technique optimized for ABox. This paper uses the method that changes OWL-DL based Ontology to the form of Rule like Datalog in order to interlock store device such as RDBMS. Ultimately, it tries to in circumstance of real world. Therefor, using Axiom that OWL holds, it suggests reasoning method that applies rules including datatype.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.579-587
• /
• 2008

Promotion of the line no.2 in Seoul Metro was changing from the existing signaling facilities for ATS(Automatic Train Stop) vehicles to the up-to-date signaling facilities for ATO(Automatic Train Operation). But, in consequence of conducting a trial run after being equipped with the ATO signaling facilities, the matter related to mix-operation with the existing ATS signaling facilities appeared. The operation of the existing ATS signaling system in combination with the ATO signaling system has made improper working related to frequency recognition of the ATS On-board Computerized Equipment. This obstructs operation of a working ATS vehicle. That is, as barring operation of an ATS vehicle that should proceed, it may make the proceeding ATS vehicle stop suddenly and after all, it will cause safety concerns. In this paper, we designed a wayside track occupancy detector that previously prevents improper working related to frequency recognition of the ATS On-board Computerized Equipment by gripping classification and working processes of operating trains throughout transmission of local signaling information from the existing facilities, which does not need to change or replace the existing signaling facilities. Furthermore, we described general characteristics of the wayside track occupancy detector and modeled the IFC(InterFace Contrivance) device and the logical circuit recognizing signal information. Then, we made an application program of PLC(programmable Logic Computer) based on the stated model. We, in relation to data transfer method, used the frame in TCP/IP transfer mode as the standard, and we demonstrated that ATO transmission frequency is intercepted.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.66.1-66.1
• /
• 2012

Although all printed cost-less radio frequency identification (RFID) tags have been considered as a core tool for bringing up a ubiquitous society, the difficulties in integrating thin film transistors (TFTs), diodes and capacitors on plastic foils using a single in-line printing method nullify their roles for the realization of the ubiquitous society1,2. To prove the concept of all printed cost-less RFID tag, the practical degree of the integration of those devices on the plastic foils should be successfully printed to demonstrate multi bit RFID tag. The tag contains key device units such as 13.56 MHz modulating TFT, digital logic gates and 13.56 MHz rectifier to generate and transfer multi bit digital codes via a wireless communication (13.56 MHz). However, those key devices have never been integrated on the plastic foils using printing method yet because the electrical fluctuation of fully printed TFTs and diodes on plastic foils could not be controlled to show the function of desired devices. In this work, fully gravure printing process in printing 13.56 MHz operated 32 bit RFID tags on plastic foils has been demonstrated for the first time to prove all printed RFID tags on plastic foils can wirelessly generate and transfer 32 bit digital codes using the radio frequency of 13.56 MHz. This result proved that the electrical fluctuations of printed TFTs and diodes on plastic foils should be controlled in the range of maximum 20% to properly operate 32 bit RFID tags.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.132-141
• /
• 1995

The torque converter, an important component of automatic transmissions, is a hydrodynamic device which has a great influence on transient characteristics of vehicle during shift. To predict the accurate driving performance in extremely transient state such as shifting process, a detailed analysis of the torque converter is required. In this study, one dimensional performance model of the torque converter based on the concept of mean flow path, was used to analyze the shifting transients and the exact values of equivalent parameters were determined from the experimental results by using BOX program. The dynamic modelings of the components of power transmission systems such as engines, planetary gear systems, clutches and one-way clutches, were carried out. To analyze the shifting transients of tracked vehicle, a simulation program was developed. In the modeling of power transmission systems, the stiffness of shafts was neglected and shifting control logic(TCU) was included. Using the developed simulation program, the driving conditions were simulated and the results of simulation were verified through the experiments on the dynamometer.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2109-2118
• /
• 2016

Based on the space vector pulse width modulation (SVPWM) theory, this paper realizes an easier SVPWM strategy, which is equivalently implemented by CBSPWM with zero-sequence voltage injection. The traditional SVPWM strategy has no effect on controlling the neutral-point voltage balance. In order to solve the neutral-point voltage unbalance problem for neutral-point-clamped (NPC) three-level inverters, this paper proposes a neutral-point voltage balance controller. The proposed controller realizes controlling the neutral-point voltage balance by dynamically calculating the offset superimposed to the three-phase modulation waves of an equivalent SVPWM strategy. Compared with the traditional SVPWM strategy, the proposed neutral-point voltage balance controller has a strong ability to balance the neutral-point voltage, has good steady-state performance, improves the output waveforms quality and is easy for digital implementation. An experiment has been carried out on a NPC three-level inverter prototype based on a digital signal processor-complex programmable logic device (DSP-CPLD). The obtained experimental results verify the effectiveness of the proposed neutral-point voltage balance controller.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.1
• /
• pp.23-31
• /
• 2005

Recently, the multimedia and high speed telecommunication systems needs a high frequency and high stability oscillator. The VCXO(voltage controlled -crystal oscillator) have continually downsized to gratify a thin and small size of the telecommunication systems. In his paper, we have developed the small ceramic PECL(positive emitter-coupled logic) VCXO of the 5×7 mm size for gratifying the requested specifications from user, and then use the multilayer ceramic SMD(surface mounted device) package technology. The ceramic SMD PECL VCXO is operating at the 3.3 Voltage and have the frequency range of 120MHz～180MHz. The Q factor is over 5K and it has the low jitter characteristics of 3.5 ps and low phase noise.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.199-203
• /
• 2004

In this paper, we only describe the digital block of two-channel 18-bit analog-to-digital (A/D) converter employing sigma-delta method and xl28 decimation. The device contains two fourth comb filters with 1-bit input from sigma­delta modulator. each followed by a digital half band FIR(Finite Impulse Response) filters. The external analog sigma-delta modulators are sampled at 6.144MHz and the digital words are output at 48kHz. The fourth-order comb filter has designed 3 types of ways for optimal power consumption and signal-to-noise ratio. The following 3 digital filters are designed with 12tap, 22tap and 116tap to meet the specification. These filters eliminate images of the base band audio signal that exist at multiples of the input sample rate. We also designed these filters with 8bit and 16bit filter coefficient to analysis signal-to-noise ratio and hardware complexity. It also included digital output interface block for I2S serial data protocol, test circuit and internal input vector generator. It is fabricated with 0.35um HYNIX standard CMOS cell library with 3.3V supply voltage and the chip size is 2000um by 2000um. The function and the performance have been verified using Verilog XL logic simulator and Matlab tool.