• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.6
• /
• pp.681-687
• /
• 2014

Nuclear industries have faced unfavorable circumstances such as an obsolescence of the instrumentation and control system, and therefore nuclear society is striving to resolve this issue fundamentally. IEC and IAEA judge that FPGA technology is a good replacement for Programmable Logic Controller (PLC) of Nuclear Instrumentation and Control System. FPGAs are currently highlighted as an alternative means for obsolete control systems. Because the main function inside an FPGA is initially developed as software, good software quality can impact the reliability of an FPGA-based controller. Therefore, it is necessary to establish a software development aspect strategy that enhances the reliability of an FPGA-based controller. In terms of software development, HDL-Programmed Device (HPD) Development Life Cycle is applied into FPGA-based Controller. The burn-in test and environmental(temperature) test should be performed in order to apply into nuclear instrumentation and control system. Therefore it is ensured that the developed FPGA-based controller are normally operated for 352 hours and 92 hours in test chamber of Korea Institute of Machinery and Materials (KIMM).

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.3
• /
• pp.313-323
• /
• 2020

With the development of smart grid technologies, a user can use the secure and reliable power services in smart gird environments. However, the users are not secure against various potential attacks because the smart gird services are provided through the public channel. Therefore, a secure and lightweight authentication and key agreement scheme has become a very important security issue in smart grid in order to guarantee user's privacy. In 2019, Zhang et al. proposed a lightweight authentication scheme for smart gird communications. In this paper, we demonstrate that Zhang et al.'s scheme is vulnerable to impersonation and session key disclosure attacks, and then we propose a secure authentication and key agreement scheme for smart grid environments without tamper-resistant devices. Moreover, we perform the informal security and the BAN logic analysis to prove that our scheme is secure various attacks and provides secure mutual authentication, respectively. We also perform the performance analysis compared with related schemes. Therefore, the proposed scheme is efficiently applicable to practical smart gird environments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.219-224
• /
• 2016

The vibration control performance of a semi-active damper connected to adjacent buildings subjected to seismic loads was investigated. The MR damper was used as a semi-active control device. A fuzzy logic control algorithm was used for effective control of the adjacent buildings connected to the MR damper. In the buildings control coupled with a MR damper, the response reduction of one building results in an increase in the response in another building. Because of these conflict characteristics, multi-objective optimization is required. Therefore, a fuzzy logic control algorithm for the control of a MR damper was optimized using a multi-objective genetic algorithm. Based on numerical analyses, the semi-active fuzzy control of MR damper for adjacent coupled buildings can provide good control performance.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.5
• /
• pp.616-621
• /
• 2006

Recently many cars are equipping a navigation system. The main purpose of the early system guides a user through the route. A navigation system includes various abilities by development of various technologies and it has given more convenience to user. It can play various records on the tape and announces which are useful information about each road. Also it can use various multi-media contents by DMB device during driving. However, guide function of basic and important road in the navigation system has not grown greatly yet. In this paper, we proposed recommendation method of human-friendly road considering user's condition through various information of outside environment, user's velocity intention, a driver's emotion and a preference of the road. Modules consists of hierarchical structure that can easily correct and add each algorithm and those use fuzzy logic algorithm.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.212-214
• /
• 2004

In this study, we fabricated the organic thin film by self-assembly method by using nitro-group and methoxy-group organic molecule. Also, we selected the organic single molecule in organic thin film and measured current-voltage characteristics by using scanning tunneling microscopy. The Organic molecules that use in an experiment is 4,4'-(diethynylphenyl)-2'-nitro-1-benzen ethiol and 4-[2,5-dimethoxy-4-ph enylethynylphenyl]ethynylphenylethanthiol. 4,4'-(dimet hynylphenyl)-2'-nitro-1-benzenethiol is applied widely in molecular electronic device and 4-[2,5-dime thoxy-4-phenylethynylphenyl]ethynylphenylethanthiol composed in Korea Research Institute of Chemical Technology. To be confirmed the formation of the self-assembled monolayers, we observed the real time frequency shift of the QCM and investigated surface of the self-assembled monolayers the using STM. With this, we measured current to the organic single molecule, in condition of the air state. As a result, we confirmed in constant voltage that properties of negative differential resistance. Using properties of negative differential resistance to get from this study, application is expected to be molecular switching device, memory device and logic device.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.133-152
• /
• 2015

Some artists and scientists in physics and animation originating from research on its form of expression thanks to the rapid development of the example in the late 20th century image production technology integrating existing media feature, perform a re-creation and pop culture content has been recognized as a key factor. animation of the modern emphasis is also commercial and artistic activities as show whether the artist can not be excluded that also target audience. The audience does not want only to receive offers simply 'seeing' and 'hearing' in the animation requires a more indirect mental met. the other side, the director should lead the audience to immerse myself in work as intended mystification induce the world. where a conflict occurs between the audience and the director and The director needs to have its troubleshooting point to 'Technology of the communication'. Which is reduced to 'How will tell,' is technology communication technologies that are abbreviated representations of animation director is accessible to the audience and it is a close relationship between the psychological aspect of audience. Because, the audience is reproduced in a limited space, but he called on the board of directors and the same time the screen, the audience located at reception and the director located at provide. It is given. led force is given to the director. for this reason, The director needs to pay attention to the psychological aspect of audience this can be explained based on psychoanalytic theory. In this paper, "How can you lie to the audience and the director is the same line?" put down logic that is the animation audience under the logic that takes place visually capture phenomenon "selective attention" and sub-concept of "goal-directed selection' and 'stimulus-driven capturel' for theory of psychology. also, Induction device to elicit selective attention of the audience accordingly, let's consider whether and how they apply in animation.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.223-229
• /
• 2018

Recently, the necessity of safety diagnosis of electrical devices has been increasing as the fire caused by electric devices has increased rapidly. This study is concerned with the safety diagnosis of electric equipment using intelligent Fuzzy technology. It is used as a diagnostic input for the multiple electrical safety factors such as the use current, cumulative use time, deterioration and arc characteristics inherent to the equipment. In order to extract these information in real time, a device composed of various sensor circuits, DSP signal processing, and communication circuit is implemented. The fuzzy logic algorithm using the Gaussian function for each information is designed and compiled to be implemented on a small DSP board. The fuzzy logic receives the four diagnostic information, deduces it by the fuzzy engine, and outputs the overall safety status of the device as a 100-step analog fuzzy value familiar to human sensibility. By experiments of a device that combines hardware and fuzzy algorithm implemented in this study, it is verified that it can be implemented in a small DSP board with human-friendly fuzzy value, diagnosing real-time safety conditions during operation of electric equipment. In the future, we expect to be able to study more intelligent diagnostic systems based on artificial intelligent with AI dedicated Micom.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.464-466
• /
• 2019

Controllers used in nuclear power plants require high reliability. A controller including a Field Programmable Gate Array (FPGA) and a Complex Programmable Logic Device (referred to hereinafter as FPGA) has been applied to many Nuclear Power Plants (NPP) in the past, including the APR1400 (Advanced Power Reactor 1400), a Korean digital nuclear power plant. Initially, the FPGA was considered as a general IC (Integrated Circuit) and verified only by device verification and performance testing. In the 1990s, research on FPGA verification began, and until the FPGA became a chip, it was regarded as software and the software Verification and Validation (V&V) using IEEE 1012-2004 was implemented. Currently, IEC 62566, which is a European standard, has been applied for a lot of verification. This method has been evaluated as the most sensible method to date. This is because the method of verifying the characteristics of SoC (System on Chip), which has been a problem in the existing verification method, is sufficiently applied. However, IEC 62566 is a European standard that has not yet been adopted in the United States and maintains the application of IEEE 1012 for FPGA. IEEE 1012-2004 or IEC 62566 is a technical standard. In practice, various methods are applied to meet technical standards. In this paper, we describe the procedure and important points of verification method of Nuclear Safety Class FPGA applying SoC verification method.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.2
• /
• pp.127-131
• /
• 2007

The control of electrical appliances residing in the home network can be accomplished via Internet with the UPnP expansion without modifying an existing UPnP. In this paper, we propose the Internet Gateway that consists of an UPnP IGD(Internet Gateway Device) DCP(Device Control Protocol) and an UPnP Bridge as a system to control electrical appliances of home network. UPnP IGD DCP is to enable the configurable initiation and sharing of Internet connections as well as assuring advanced connection-management features and management of host configuration service. It also supports transparent Internet access by non-UPnP-certified devices. UPnP Bridge searches for local home network devices by sending control messages, while control point of UPnP Bridge looks up devices of interest on the Internet, subsequently furnishing the inter-networking controlling among devices which belong to different home network systems. With our approach, devices on one home network can control home electrical appliances on the other home network via Internet through IGD DCP with control commands of UPnP.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.121-130
• /
• 1999

Generally, A Dynamic Absorber by using Active viscous Damping is highlighted for effective suspension system, such as improved ride comfort and handling in the market. Lately, this system based on the Sky-Hook damper theory is introduced by the name of "Active Dynamic Absorber" to us. This system has an excellent performance in contrast to Passive. Adaptive Dynamic Absorber, besides having low cost components of system, low energy consumption. light weight of system. In this viewpoint. most of car-maker will adopt this system in the near future. For this reason, we developed Dynamic Absorber by using Active viscous Damping which is equipped with continuously variable Dynamic Absorber and Control logic consisting Filter and Estimator. control apparatus of Dynamic Absorber operated by 16-bit microprocessor of high performance. variable device of viscous Damping. G-sensor so on. In this paper. several important points of development procedure for realizing this system will be described with results in which is obtained from experiment by simulation and Full car test in Proving ground. respectively.pectively.