• Title/Summary/Keyword: locking system

Search Result 272, Processing Time 0.028 seconds

Selection of Valves Susceptible to Pressure Locking and Thermal Binding (압력잠김 및 열고착 현상 발생가능 밸브의 선정)

  • Lee, Sung-No;An, Jin-Geun;Kim, Seoug-Beom
    • The KSFM Journal of Fluid Machinery
    • /
    • v.10 no.5
    • /
    • pp.20-26
    • /
    • 2007
  • Some gate valves are susceptible to pressure locking and thermal binding which prevent the safety function. The safety related gate valves susceptible to pressure locking and thermal binding shall be identified and taken preventive actions to ensure the safety function. The identification of the gate valves susceptible to pressure locking and thermal binding needs the evaluation of system design, valve and piping arrangement, test requirements, and operating conditions. Application of preventive methods should consider the system safety function, applicability, effectiveness, interface with system design, and cost. The selection procedure of valves susceptible to pressure locking and thermal binding can be effectively used in industry including nuclear power plants. In order to prevent the pressure locking, the hole can be drilled through the one disc of upstream side or down stream and the external equalizing line can be installed from bonnet to downstream or upstream. The double disc parallel seat valve type can be used instead of flexible wedge gate valve to prevent the thermal binding. The identification of gate valves susceptible to pressure locking and thermal binding, and preventive actions will meet the regulatory requirements and enhance the availability and safety of plants.

Topology Optimization of an Electromagnetic Coupler Considering Force Direction (힘의 방향성을 고려한 전자기 커플러의 위상 최적화)

  • Yang, Seung-Jin;Yoo, Jeong-Hoon
    • Transactions of the Society of Information Storage Systems
    • /
    • v.2 no.4
    • /
    • pp.230-235
    • /
    • 2006
  • The machine locking system is an important device for the safety of persons using the machine. In this study, a locking system using electromagnetic fields is proposed to decrease the defects and the cost for repairing and maintenance of the existing locking system using structural mechanism. We analyze the electromagnetic locking system and calculate the generated force considering direction by the finite element method. Also, we set up two design domains for the topology optimization; first domain is optimized to reduce the volume and the other is optimized to maximize the generated force keeping the volume, especially. The optimal design is obtained by integration of the two optimized results. An improved design is obtained by the optimal topology and it is confirmed by comparison with the initial locking system.

  • PDF

The wavelength locking system of the fabry-perot filter for WDM (WDM을 위한 Fabry-perot 필터의 로킹 시스템)

  • 송준용;이호준
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.34D no.6
    • /
    • pp.58-64
    • /
    • 1997
  • The wavelengt lockin gsystem of the optical fabry-perot filter theoretially derived and experimentally realized by using the ithering method in order to compensate the laser wavelength drift increasing the BER of the WDM system. The deviation between the laser wavelength and the optical filter center wavelength is compensated by applying a suitable voltage to the PZT. Accordingly, the laser wavelength selected by the fabry-perot filter always maintains the condition of maximum transmission powr. A wavelength locking system has been demonstrated using a fiber fabry-perot filter with a free spectral range of 80nm and an FWH of 1nm. The voltages of the sine wave generated for dithering was 20mV and 10mV, the frequency was 2kHz and center wavelength of the tunable laser was 1550nm. In this paper, the locking system have 20ms of locking time and 2nm of locking range.

  • PDF

A Research on Predicting Dynamic Behavior of Door Locking System for Side Impact Safety

  • Kwak, K.T.;Choi, D.W.;Seo, S.W.
    • Journal of Auto-vehicle Safety Association
    • /
    • v.5 no.1
    • /
    • pp.25-30
    • /
    • 2013
  • The main purpose of this research is to predict dynamic behavior of door locking system for side impact safety and the design process to avoid door opening is introduced. The equations of motion that represent the system are obtained from the energy equation. From them, the motion of door handle is predicted by using Runge-Kutta $4^{th}$ order method and the simulation result is compared with the real crash data. Also, the design guide to define the properties of door locking system from the standpoint of avoiding door opening phenomenon is introduced.

Characteristics of Click Laminate Flooring Base on Click Profile Shape, Locking Strength and International Patent (Click Profile형태, 결합강도와 국제특허를 중심으로 분석한 클릭형 강화마루의 특성)

  • Park, Yoon;Seo, Jung-Ki;Kim, Su-Min
    • Journal of the Korea Furniture Society
    • /
    • v.20 no.2
    • /
    • pp.122-135
    • /
    • 2009
  • The objective of this work was to research click profile of laminate flooring by comparison of click and bonding laminate floorings, especially base on the click profile shape, bonding strength and international patents. Non-glue locking system has been used since laminate flooring was developed. For the reason of environment and saving installation time, the manufacturer in Europe and USA has developed click profile for laminate flooring. Each manufacturer has patent on each click profile. Although each click profile has good lock strength as shape, Berryand Unilin company's click profile systems showed higher locking strength than others. Korean laminate flooring company pay the fee of patent for using European and American manufacturer's click profile. From this work, we grope Korean style laminate flooring and click profile through research on the click profile shape, bonding strength and patents of European and American manufacturers.

  • PDF

The Development Process of Vehicle Roof Carrier using One Side Release System (측면 단동 릴리즈 시스템을 이용한 자동차용 루프 캐리어 개발 프로세스)

  • Jang, Dong-Hwan;Ko, Byung-Doo;Lee, In-Chul
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.27 no.5
    • /
    • pp.56-62
    • /
    • 2010
  • This paper presents the development process of roof carrier assembly using a one side release system for a vehicle. An RV(Recreational Vehicle) or SUV(Sports Utility Vehicle) has a roof carrier system on an upper surface of a roof panel for loading large or long size baggage. Such a roof carrier system is comprised of a roof rack longitudinally mounted on a roof panel and cross bar perpendicularly installed in the horizontal direction. Several locking mechanisms used in most vehicle roof carrier systems are composed with both side releasable locking ones. The obvious drawback to this arrangement is that when the user desires to reposition the cross bar, first one of the locking members must be unlocked and then the user must walk around to the opposite side of the vehicle to unlock the other member. In this paper, we proposed a newly locking mechanism, which allows a user simultaneously place both locking members of the roof carrier in locked and unlocked positions. In order to estimate design compatibility, structural and modal analysis is performed. Furthermore, a prototype based on the proposed design has been made, and then durability test carried out. From the simulation and experimental results, the proposed roof carrier system is proved effective and safe.

An Efficient Altruistic Looking Protocol for the Mobile Transaction Management System (이동 데이터베이스 시스템을 위한 효율적인 이타적 잠금기법)

  • 권혁신;김세윤;김응모
    • Journal of Information Technology Applications and Management
    • /
    • v.11 no.1
    • /
    • pp.53-67
    • /
    • 2004
  • We propose an advanced transaction scheduling protocol to improve the concurrency and to guarantee the mobility for the mobile database management systems. Mobility, portability, and wireless link In mobile computing environment can cause certain drawbacks, and thus it is more difficult to solve the concurrency control problems. However, a locking scheme should be used to guarantee the data consistency and to prevent the data conflicts. It is well known that data consistency is guaranteed by standard transaction scheduling schemes like two-phase locking (2PL). It has two of operation, lock and unlock. But 2PL does not give solution for mobile system. Altruistic Locking (AL) and classifying transactions, we adapt, can give solution for the previous problems. AL, as an advanced protocol, has attempted to reduce delay effects associated with lock release moment by the use of donation. In this paper, we extend those approaches and classify the transactions to reduce delay effects of short-lived transaction caused by long-lived transaction. In addition, we show efficient solution for the case of disconnection occurrence. Our protocol, namely, Mobile Altruistic Locking (MAL) is shown to be efficiently used in order to reduce delay effects and to guarantee database consistency in a state of the slippery connection in mobile database systems.

  • PDF

DEVELOPMENT OF A MACHINE VISION SYSTEM FOR AN AUTOMOBILE PLASTIC PART INSPECTION

  • ANDRES N.S.;MARIMUTHU R.P.;EOM Y.K.;JANG B.C.
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2005.06a
    • /
    • pp.1131-1135
    • /
    • 2005
  • Since human is vulnerable to emotional, physical and environmental distractions, most human inspectors cannot sustain a consistent 8-hour inspection in a day specifically for small components like door locking levers. As an alternative for human inspection, presented in this study is the development of a machine vision inspection system (MVIS) purposely for door locking levers. Comprises the development is the structure of the MVIS components, designed to meet the demands, features and specifications of door locking lever manufacturing companies in increasing their production throughput upon keeping the quality assured. This computer-based MVIS is designed to perform quality measures of detecting missing portions and defects like burr on every door locking lever. NI Vision Builder software for Automatic Inspection (AI) is found to be the optimum solution in configuring the needed quality measures. The proposed software has measurement techniques such as edge detecting and pattern-matching which are capable of gauging, detecting missing portion and checking alignment. Furthermore, this study exemplifies the incorporation of the optimized NI Builder inspection environment to the pre-inspection and post-inspection subsystems.

  • PDF

Development of Experimental Equation of Hood Frame for Vehicle Considering Operating Angle (작동각을 고려한 차량 후드 프레임의 실험식 개발)

  • Song, Yo-Sun;Hur, Kwan-Do;Son, In-Soo
    • Journal of Power System Engineering
    • /
    • v.20 no.3
    • /
    • pp.57-63
    • /
    • 2016
  • This paper presents the experimental result and theoretical analysis result to investigate the correlation between the operating force, angle and locking torque for vehicle hood frame. Also, we derived the experimental equation that using the results for experiment and theory. The hood frame is switching-devices used for opening and closing the vehicle hood. It needs the correlation data between locking torques of each joint, operating force and angle of hood frame. The correlation data for torque and reaction force of hood frame obtained through experiment and theory analysis. Finally, the experimental equation of the locking torque prediction for the hood frame is derived.

An efficient four node degenerated shell element based on the assumed covariant strain

  • Choi, Chang-Koon;Paik, Jong-Gyun
    • Structural Engineering and Mechanics
    • /
    • v.2 no.1
    • /
    • pp.17-34
    • /
    • 1994
  • This paper proposes a new four node degenerated shell element. In the formulation of the new element, the assumed covariant shear strains are used to avoid the shear locking problem, and the assumed covariant membrane strains are applied to alleviate the membrane locking problem and also to improve the membrane bending performance. The assumed covariant strains are obtained from the covariant strain field defined with respect to the element natural coordinate system. This formulation enables us to obtain a shell element, which does not produce spurious singular modes, avoids locking phenomena, and excels in calculation efficiency. Several examples in this paper indicate that, despite its simplicity, the achieved accuracy and convergence are satisfactory.