• Journal of Korea Planning Association
• /
• v.54 no.3
• /
• pp.75-90
• /
• 2019

As the 24-hour society arrives, human activities in daytime and nighttime urban spaces are changing drastically, and the need for new urban management policies is steadily increasing. This study analyzes the types and characteristics of Seoul's human dynamics using location-based big data and the results are summarized as follows. First, the pattern of human dynamics in Seoul repeats itself every 7 days. Second, the types of human dynamics in Seoul can be classified into five types, and each of type has its own unique time-series and local characteristics. Third, the degree of match between human dynamics and zoning system in urban planning legislation was highest in 'Type 1' residence pattern and low in other types. The following implications can be drawn from these results. First, This paper examined the methodology of analyzing the regional characteristics of Seoul through the human dynamics and obtained meaningful results. Second, This paper can derive reliable and objective pattern analysis results using Big data that reflect the overall population characteristics. Third, the scale of night-time activity in the urban space of Seoul was understood, and its distribution, patterns and characteristics identified.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.366-368
• /
• 2006

This paper analyzes partial discharge pattern using Rogowski coil and acoustic emission sensor to power transformer. Therefore, the location of partial discharge and pattern is deduced as obtaining reliable data to establish core structure in transformer.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.2
• /
• pp.63-79
• /
• 2008

With the recent development of advanced GIS and complex spatial analysis technologies, the more sophisticated technologies are being required to support the advanced knowledge for solving geographical or spatial problems in various decision support systems. In addition, necessity for research on scientific crime investigation and forensic science is increasing particularly at law enforcement agencies and investigation institutions for efficient investigation and the prevention of crimes. There are active researches on geographic profiling to predict the base location such as criminals' residence by analyzing the spatial patterns of serial crimes. However, as previous researches on geographic profiling use simply statistical methods for spatial pattern analysis and do not apply a variety of spatial and temporal analysis technologies on serial crimes, they have the low prediction accuracy. Therefore, this paper identifies the typology the spatio-temporal patterns of serial crimes according to spatial distribution of crime sites and temporal distribution on occurrence of crimes and proposes STA-BLP(Spatio-Temporal Analysis based Base Location Prediction) algorithm which predicts the base location of serial crimes more accurately based on the patterns. STA-BLP improves the prediction accuracy by considering of the anisotropic pattern of serial crimes committed by criminals who prefer specific directions on a crime trip and the learning effect of criminals through repeated movement along the same route. In addition, it can predict base location more accurately in the serial crimes from multiple bases with the local prediction for some crime sites included in a cluster and the global prediction for all crime sites. Through a variety of experiments, we proved the superiority of the STA-BLP by comparing it with previous algorithms in terms of prediction accuracy.

• IE interfaces
• /
• v.16 no.spc
• /
• pp.21-27
• /
• 2003

Objective of this paper is to develop the user mobility model(UMM) which is used for the performance analysis of location update and paging algorithm and at the same time, consider the user mobility pattern(UMP) in zone-based cellular networks. User mobility pattern shows correlation in space and time. UMM should consider these correlations of UMP. K-dimensional Markov chain is presented as a UMM considering them where the states of Markov chain are defined as the current location area(LA) and the consecutive LAs visited in the path. Also, a new two dimensional Markov chain composed of current LA and time interval is presented. Simulation results show that the appropriate size of K in the former UMM is two and the latter UMM reflects the characteristic of UMP well and so is a good model for the analytic method to solve the performance of location update and paging algorithm.

• Economic and Environmental Geology
• /
• v.33 no.6
• /
• pp.547-556
• /
• 2000

The purpose of this study is to analyze shear fracture system using landslide location occurred 1998 at Janghung area. For the geological implication, foliation was surveyed and analyzed, and location of landslide, geological structure and topography were constructed into spatial database using GIS. With the constructed spatial database, shear fracture system was assessed by the relation analysis between strike and dip of the foliation and aspect and slope of the topography. We compared strike and dip of foliation and aspect and slope of topography and recognized the typical fracture pattern, strike and dip of joint, that coincided with shear fracture system. The result tells us that foliation of gneiss has geometrical relation to joint or fault that leading landslide. GIS was used to analyze vast data efficiently and the result can be used to assess the landslide susceptibility as important factor.

• Journal of Biosystems Engineering
• /
• v.34 no.2
• /
• pp.95-105
• /
• 2009

A method was proposed which employed control of the drop location of fertilizer particles on a spinner disc to optimize the spread pattern uniformity. The system contained an optical sensor as a feedback mechanism, which measured discharge velocity and location, as well as particle diameters to predict a spread pattern of a single disc. Simulations showed that the feed gate adaptation algorithm produced high quality patterns for any given application rate in the dual disc spreader. The performance of the feed gate control method was assessed using data collected from a Sulky spinner disc spreader. The results showed that it was always possible to find a spread pattern with an acceptable CV lower than 15%, even though the spread pattern was obtained from a rudimentary flat disc with straight radial vanes. A mathematical optimization method was used to find the initial parameter settings for a specially designed experimental spreading arrangement, which included the feed gate control system, for a given flow rate and swath width. Several experiments were carried out to investigate the relationship between the gate opening and flow rate, disc speed and particle velocity, as well as disc speed and predicted landing location of fertilizer particles. All relationships found were highly linear ($r^2$ > 0.96), which showed that the time-of-flight sensor was well suited as a feedback sensor in the rate and uniformity controlled spreading system.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.1982-1990
• /
• 2022

The purpose of this study was to verify the possibility of fuel rod pattern analysis in a fresh fuel assembly using the Yonsei single-photon emission computed tomography (YSECT) system. The YSECT system consisted of three main parts: four trapezoidal-shaped bismuth germanate scintillator-based 64-channel detectors, a semiconductor-based multi-channel data acquisition system, and a rotary stage. In order to assess the performance of the prototype YSECT, tomographic images were obtained for three representative fuel rod patterns in the 6 × 6 array using two representative image-reconstruction algorithms. The fuel-rod patterns were then assessed using an in-house fuel rod pattern analysis algorithm. In the experimental results, the single-directional projection images for those three fuel-rod patterns well discriminated each fuel-rod location, showing a Gaussian-peak-shaped projection for a single 10 mm-diameter fuel rod with 12.1 mm full-width at half maximum. Finally, we successfully verified the possibility of the fuel rod pattern analysis for all three patterns of fresh fuel rods with the tomographic images obtained by the rotational YSECT system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.4
• /
• pp.86-94
• /
• 2009

Currently, positioning methods for LBS(Location Based Service) are GPS and network-based positioning techniques that use mobile communication networks. In these methods, however, the accuracy of positioning decreases due to the propagation delay caused by the non-line-of-sight(NLOS) effect and the repeater. To address this disadvantage, the CDMA system uses Pattern Matching algorithm. The Pattern Matching algorithm constructs a database of the propagation characteristics of the RF signals measured during the GPS positioning along with the positioned locations, so that the location can be provided by comparing the propagation characteristics of the received signals and the database, upon a user's request. In the area where GPS signals are not received, however, a database cannot be constructed. There are problem that the accuracy of positioning decreases due to the area without a database Because Pattern Matching algorithm depend on database existence. Therefore, this paper proposed a pilot signal strength prediction algorithm to enable construction of databases for areas without databases, so as to improve the performance of the Pattern Matching algorithm. The database was constructed by predicting the pilot signals in the area without a database using the proposed algorithm, and the Pattern Matching algorithm analysed positioning performance.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.2
• /
• pp.160-171
• /
• 2008

MU's mobility patterns can be found from a movement history data. The prediction accuracy and model complexity depend on the degree of application of history data. The more data we use, the more accurate the prediction is. As a result, the location management cost is reduced, but complexity of the model increases. In this paper, we classify MU's mobility patterns into four types. For each type, we find the respective optimal number of application of history data, and predictive location area by using the simulation. The optimal numbers of four types are shown to be different. When we use more than three application of history data, the simulation time and data storage are shown to increase very steeply.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.2
• /
• pp.252-255
• /
• 2008

A study for discharge pattern analysis partial and fault location by use of UHF sensors in GIS. However, in the latter case, the results considered the velocity of EM waves modified by the waveguide characteristics of GIS bus bar were not reported yet. In this paper, UHF wide band sensor to detect partial discharge signals have been designed and manufactured to get the widest band characteristic by an application of Fat-Dipole UHF antenna and the result that the transmission velocity of EM waves is 2/3 of the light have been got through the consideration of waveguide characteristics. Also, to verify applicability on site of the developed method, self-designed external type UHF sensor have been installed on operating GIS in Korea Midland Power co. and detected location of the fault. Through the fault have been found at the location, the reliability of the developed method have been proved.