• Journal of Korean Institute of Industrial Engineers
• /
• 제34권2호
• /
• pp.151-159
• /
• 2008

An efficient location registration scheme is essential to accommodate continuously increasing mobile subscribers and to offer a variety of multimedia services with good quality. In this study, we consider a distance-based registration scheme where the number of location areas varies on the basis of cell-by-cell, not of ring-by-ring, to analyze the optimal size of the location area. Using our proposed cell-by-cell distance-based registration scheme with random walk mobility model, we analyze a variety of circumstances to obtain the optimal number of cells for location area that minimizes total signaling traffic on radio channels. From our analysis results, we show that the optimal number of cells for location area is between 4 and 6 in most cases, and our cell-by-cell distance-based location registration scheme has less signaling traffic than optimal ring-by-ring distance-based location registration scheme where optimal distance threshold is 2 (thus the optimal number of cells for location area is 7).

• Journal of the Korea Society of Computer and Information
• /
• 제22권10호
• /
• pp.55-62
• /
• 2017

In this paper, we proposes a multi-ring based mobile sink location scheme for solar-powered wireless sensor network (WSN). The proposed scheme maintains the multi-rings in which nodes keep the current location of sink node. With the help of nodes in multi-rings, each node can locate the sink node efficiently with low-overhead. Moreover, because our scheme utilizes only surplus energy of a node, it can maintain multiple rings without degrading any performance of each node. Experimental results show that the proposed scheme shows much better latency and scalability with lower energy-consumption than the existing single-ring based scheme.

• Journal of Korean Neurosurgical Society
• /
• 제42권1호
• /
• pp.35-41
• /
• 2007

Objective : Determining the location of paraclinoid aneurysms for microsurgery is important for selecting treatment options, especially when deciding on the release of the dural ring in direct clipping. We examined the reliability of using the optic strut as an anatomical landmark for evaluating the location of paraclinoid aneurysms. Methods : Cadaveric dissection was performed to establish the relationship of the optic strut to the dural ring. Results from these anatomic studies were compared with the three-demensional computed tomographic angiographic [3D-CTA] findings of nine patients with ten paraclinoid aneurysms between May 2004 and October 2005. These, 3D-CTA results were then compared with intraoperative findings. Results : The inferior boundary of the optic strut accurately localized the point at the proximal dural ring in cadaveric study. The optic strut and its relationship to the aneurysms was well observed on the multiplanar reformats of 3D-CTA. During microsurgery, nine of ten aneurysms were verified to arise from distal to the upper surface of the optic strut. Two aneurysms that had arisen between the inferior and superior boundary of the optic strut were observed to lie within the carotid cave. One aneurysm which had arisen at the inferior boundary of the optic strut and directed inferiorly was observed to lie within the cavernous sinus just after the release of the proximal ring. Conclusion : The optic strut, as identified with multiplanar reformats of 3D-CTA, provided a reliable anatomic landmark for the proximal rings and an important information about the location of aneurysms around the anterior clinoid process (ACP). Therefore, 3D-CTA and the optic strut could become an invaluable tool and a landmark in the assessment of the location of paraclinoid aneurysms for microsurgery.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권8호
• /
• pp.2827-2848
• /
• 2021

Mobile Crowdsourcing (MCS) has become an emerging paradigm evolved from crowdsourcing by employing advanced features of mobile devices such as smartphones to perform more complicated, especially spatial tasks. One of the key procedures in MCS is to collect answers from mobile users (workers), which may face several security issues. First, authentication is required to ensure that answers are from authorized workers. In addition, MCS tasks are usually location-dependent, so the collected answers could disclose workers' location privacy, which may discourage workers to participate in the tasks. Finally, the overhead occurred by authentication and privacy protection should be minimized since mobile devices are resource-constrained. Considering all the above concerns, in this paper, we propose a lightweight and privacy-preserving answer collection scheme for MCS. In the proposed scheme, we achieve anonymous authentication based on traceable ring signature, which provides authentication, anonymity, as well as traceability by enabling malicious workers tracing. In order to balance user location privacy and data availability, we propose a new concept named current location privacy, which means the location of the worker cannot be disclosed to anyone until a specified time. Since the leakage of current location will seriously threaten workers' personal safety, causing such as absence or presence disclosure attacks, it is necessary to pay attention to the current location privacy of workers in MCS. We encrypt the collected answers based on timed-release encryption, ensuring the secure transmission and high availability of data, as well as preserving the current location privacy of workers. Finally, we analyze the security and performance of the proposed scheme. The experimental results show that the computation costs of a worker depend on the number of ring signature members, which indicates the flexibility for a worker to choose an appropriate size of the group under considerations of privacy and efficiency.

• Journal of the Korean Society of Safety
• /
• 제19권4호
• /
• pp.101-108
• /
• 2004

In this study, open conical shells with ring and stringers are analyzed A versatile 4-node shell element which is useful for the analysis of conical shell structures is used and 3-D beam element is used for stiffeners. An improved flat shell element is established by the combined use of the addition of non-conforming displacement modes and the substitute shear strain fields. The proposed element has six degrees of freedom per node and permits an easy connection to other types(beam element) of finite elements. Optimum location and optimum section properties of ring and stinger are obtained. It is shown thai the thickness of conical shell can be reduced about $20\~50\%$ by appropriate location of stiffeners.

• Journal of the korean Society of Automotive Engineers
• /
• 제6권2호
• /
• pp.64-75
• /
• 1984

In the engine design, it will be able to higher compression ratio and decreasing the cylinder size, if improve the vaporization of fuel and increasing the mass burned fraction in the kerosene engine. Therefore, concave, convex and straight types of hear ring set up neighborhood intake valve into the combustion chamber. The vaporization effect of fuel satisfied by heat transfer from the heat ring, but have need of selection of the location and surface area of the heat ring. Also, combustion duration of the combustion chamber with concave heat ring shorter than combustion chamber with other two types of heat ring, and about 30percent decreases in combustion duration as compared with combustion chamber without heat ring.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 한국통신학회 1988년도 추계학술발표회 논문집
• /
• pp.114-117
• /
• 1988

In mobile radio communication system involving geostationary satellites the field intensity of electromagnetic wave varies with frequency shape and location of an obstacle between a tramamitter and a receiver. In this paper a ring type obstacle between the propagation paths is presented. On the basis of Fresnel diffraction theory, the field intensity varying with ring-type obstacle’s radius is obtained by computer simulation.]

• Advances in concrete construction
• /
• 제14권1호
• /
• pp.35-43
• /
• 2022

Based on novel Galerkin's technique, the theoretical study gives a prediction to estimate the vibrations of FG rotating cylindrical shell. Terms of ring supports have been introduced by a polynomial function. Three different laws of volume fraction are utilized for the vibration of cylindrical shells. Variation frequencies with the locations of ring supports have been analyzed and these ring supports are placed round the circumferential direction. The base of this approach is an approximate estimation of eigenvalues of proper functions which are the results of solutions of vibrating equation. Each longitudinal wave number corresponds to a particular boundary condition. The results are given in tabular and graphical forms. By increasing different value of height-to-radius ratio, the resulting backward and forward frequencies increase and frequencies decrease on increasing length-to-radius ratio. There is a new form of frequencies is obtained for different positions of ring supports, which is bell shaped. Moreover, on increasing the rotating speed, the backward frequencies increases and forward frequencies decreases.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제7권5호
• /
• pp.81-88
• /
• 1999

In order to understand the relationship between the phase angle of piston ring and oil consumption was measured by analyzing $CO_2$concentration in exhaust gas. The use of hydrogen fuel not gasoline makes this possible because all of the carbon component in exhaust gas can be assumed to be produced from oil. As a result of experiment, it is known that the oil consumption varies periodically and a specific location of ring end gap was found at each peak of oil consumption. Therefore, it was found that the oil consumption was not constant even at the same operating conditions and this is because the relative locations of top and 2'nd ring end gap change arbitrarily.

• Journal of the Korean Operations Research and Management Science Society
• /
• 제19권1호
• /
• pp.69-83
• /
• 1994

This paper deals with a capacitated ring-star network design problem (CRSNDP) with node capacity constraints. The CRSNDP is formulated as a mixed 0-1 integer problem, and a 2-phase heuristic solution procedure, ADD & VAM and RING, is developed, in which the CRSNDP is decomposed into two subproblems : the capacitated facility location problem (CFLP) and the traveling sales man problem (TSP). To solve the CFLP in phase I the ADD & VAM procedure selects hub nodes and their appropriate capacity from a candidate set and then assigns them user nodes under node capacity constraints. In phase II the RING procedure solves the TSP to interconnect the selected hubs to form a ring. Finally a solution of the CRSNDP can be achieved through combining two solution of phase I & II, thus a final design of the capacitated ring-star network is determined. The analysis of computational results on various random problems has shown that the 2-phase heuristic procedure produces a solution very fast even with large-scale problems.