• 제목/요약/키워드: location intensity

검색결과 465건 처리시간 0.028초

KHST 차량 벽면의 투과손실값 예측 (Transmission Loss Prediction of KHST′s Wall)

  • Kim, Kwanju;Taejung Yoon
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 추계학술대회논문초록집
    • /
    • pp.317.2-317
    • /
    • 2002
  • Transmission loss of KHST passenger vehicle was calculated using measured acoustic data: In order to verify the transmission loss results for KHST case, similar experiment was carried out in laboratory condition, which result was compared those by geometric acoustic method. The computational results shows good agreement with the transmission loss magnitude from experiments. This paper also mentions items to obtain more accurate transmission loss values, i. e. how to assure reverberant field condition, the selection of source speaker' location.

  • PDF

모니터링 정확도와 운용 강건성을 고려한 개인전투체계용 착용형 생체센서 어레이의 최적 위치 분석 (Analysis of the Optimal Location of Wearable Biosensor Arrays for Individual Combat System Considering Both Monitoring Accuracy and Operational Robustness)

  • 하슬기;박상헌;임현철;백승호;김도경;윤상희
    • 한국군사과학기술학회지
    • /
    • 제22권2호
    • /
    • pp.287-297
    • /
    • 2019
  • Monitoring for the physiological state of a solider is essential to the realization of individual combat system. Despite all efforts over the last decades, there is no report to point out the optimal location of the wearable biosensors considering both monitoring accuracy and operational robustness. In response, we quantitatively measure body temperature and heartrate from 34 body parts using 2 kinds of biosensor arrays, each of which consists of a thermocouple(TC) sensor and either a photoplethysmography(PPG) sensor or an electrocardiography(ECG) sensor. The optimal location is determined by scoring each body part in terms of signal intensity, convenience in use, placement durability, and activity impedance. The measurement leads to finding the optimal location of wearable biosensor arrays. Thumb and chest are identified as best body parts for TC/PPG sensors and TC/ECG sensors, respectively. The findings will contribute to the successful development of individual combat system.

GPS 스푸핑 공격 취약점 분석 및 실증: 상용 드론을 대상으로 (Analysis and Demonstration of GPS Spoofing Attack: Based on Commercial Drones)

  • 윤진서;김민재;이경률
    • 정보보호학회논문지
    • /
    • 제34권3호
    • /
    • pp.431-437
    • /
    • 2024
  • 최근 드론은 공공의 목적을 넘어, 다양한 산업에서 활용되며, 민간 분야까지 확대되어 상용화되는 실정이다. 현재 상용화되는 대부분 드론은 사용자에게 드론의 위치를 알리기 위한 목적으로, 인공위성으로부터 위치 신호를 수신하는 GPS 수신기를 장착하지만, 인공위성으로부터 위치 신호를 전달받는 거리가 멀다는 단점과 이로 인하여 수신하는 위치 신호의 세기가 약하다는 단점이 존재한다. 이러한 단점들로 인하여, 인공위성으로부터 수신하는 위치 신호보다 더욱 강한 신호를 드론에서 수신한다면, 의도하지 않은 위치정보를 수신하는 위치 조작과 재밍 공격이 가능하다. 따라서, 본 논문에서는 GPS를 기반으로 위치정보를 활용하는 드론에 대한 안전성 평가 및 무선 통신 상황에서 발생 가능한 취약점에 대응하기 위한 목적으로, 상용 드론들을 대상으로, GPS 스푸핑 공격에 대한 가능성을 분석하고 실증한다. 본 논문의 결과는 더욱 현실적인 취약점 분석 및 안전성 평가를 위한 실험과 그 결과를 도출하기 위한 선행 연구로 활용될 것으로 사료된다.

기술수준별 제조창업의 공간분포 특성과 고용증가 효과 분석 (Analysis of Job Creation Effects and Spatial Distribution Characteristics of Startups in Manufacturing at Different Technology Levels)

  • 우한성;서대현
    • 한국경제지리학회지
    • /
    • 제25권4호
    • /
    • pp.600-616
    • /
    • 2022
  • 본 연구에서는 제조창업의 공간적 맥락에 대한 고찰과 함께 DID모형을 활용하여 기술수준별 제조창업의 연차별 고용증가 효과 추이를 분석하였다. 분석 결과 수도권과 비수도권, 대도시 지역에서의 특성이 다르게 확인되었다. 특히 고기술 제조창업은 수도권에서 단기에 걸쳐 고용증가 효과가 두드러진 반면 비수도권에서는 중고기술 제조창업이 장기에 걸쳐 고용증가 효과가 높게 나타났다. 대도시 지역에서는 기술수준별 제조창업의 고용증가 효과가 뚜렷하게 발견되지 않았다. 이러한 분석 결과가 제공하는 함의는 다음과 같다. 먼저 수도권의 고기술 제조창업은 비교적 단기에 고용증가 효과가 높게 나타나므로 그 효과가 장기간 지속될 수 있도록 창업 후 일정 기간이 지난 생존기업의 스케일업에 정책지원이 집중될 필요가 있을 것이다. 반면 비수도권 및 지방 대도시 지역에서는 창업지원 인프라의 수도권 쏠림현상과 인재유출 등의 현실적인 상황을 감안하여 실제적인 고용증가 효과가 확인되는 중고기술 창업, 즉 전통적 제조기반을 토대로 한 산업영역에 창업지원 역량을 집중할 필요가 있으며 고용창출 효과가 드러나는 시차를 고려하여 장기적인 안목에서 정책지원, 평가 등이 이루어져야 할 것이다.

인공강우기 기반 확률강우재현을 통한 식생유니트형 LID시스템의 우수유출지연 효과분석 (Analysis of Rainfall Runoff Delay Effect of Vegetation Unit-type LID System through Rainfall Simulator-based Probable Rainfall Recreation)

  • 김태한;박정현;최부헌
    • 한국환경복원기술학회지
    • /
    • 제22권6호
    • /
    • pp.115-124
    • /
    • 2019
  • In a climate change environment where heat damage and drought occur during a rainy season such as in 2018, a vegetation-based LID system that enables disaster prevention as well as environment improvement is suggested in lieu of an installation-type LID system that is limited to the prevention of floods. However, the quantification of its performance as against construction cost is limited. This study aims to present an experiment environment and evaluation method on quantitative performance, which is required in order to disseminate the vegetation-based LID system. To this end, a 3rd quartile huff time distribution mass curve was generated for 20-year frequency, 60-minute probable rainfall of 68mm/hr in Cheonan, and effluent was analyzed by recreating artificial rainfall. In order to assess the reliability of the rainfall event simulator, 10 repeat tests were conducted at one-minute intervals for 20 minutes with minimum rainfall intensity of 22.29mm/hr and the maximum rainfall intensity of 140.69mm/hr from the calculated probable rainfall. Effective rainfall as against influent flow was 21.83mm/hr (sd=0.17~1.36, n=20) on average at the minimum rainfall intensity and 142.27mm/hr (sd=1.02~3.25, n=20) on average at the maximum rainfall intensity. In artificial rainfall recreation experiments repeated for three times, the most frequent quartile was found to be the third quartile, which is around 40 minutes after beginning the experiment. The peak flow was observed 70 minutes after beginning the experiment in the experiment zone and after 50 minutes in the control zone. While the control zone recorded the maximum runoff intensity of 2.26mm/min(sd=0.25) 50 minutes after beginning the experiment, the experiment zone recorded the maximum runoff intensity of 0.77mm/min (sd=0.15) 70 minutes after beginning the experiment, which is 20 minutes later than the control zone. Also, the maximum runoff intensity of the experiment zone was 79.6% lower than that of the control zone, which confirmed that vegetation unit-type LID system had rainfall runoff reduction and delay effects. Based on the above findings, the reliability of a lab-level rainfall simulator for monitoring the vegetation-based LID system was reviewed, and maximum runoff intensity reduction and runoff time delay were confirmed. As a result, the study presented a performance evaluation method that can be applied to the pre-design of the vegetation-based LID system for rainfall events on a location before construction.

물리적 지진모델링 기반 강지진동 모사를 통한 진도 감쇠 특성 분석 (An Analysis of Intensity Attenuation Characteristics by Physics-based Strong Ground-Motion Simulation)

  • 김수경;송석구;경재복
    • 한국지구과학회지
    • /
    • 제40권1호
    • /
    • pp.56-67
    • /
    • 2019
  • 본 연구에서는 미국 남캘리포니아 지진센터에서 개발한 물리적 지진모델링 기반 광대역 강지진동 모사 플랫폼(버전 16.5)을 활용하여, 규모 6.0, 6.5, 7.0 지진에 대한 진도 감쇠 특성 분석을 수행하였다. 지진 발생 위치는 2016년 규모 5.8 경주 지진 진앙 인근을 가정하였으나 지각 전파 모델의 경우 남캘리포니아 강지진동 모사 플랫폼에서 제공하는 미국의 대표적인 지각 모델 두 개를 사용하였다. 하나는 판 내부를 대표하는 미국 중동부 지역(Central and Eastern United States, CEUS) 모델이고 다른 하나는 판의 경계를 대표하는 미 서부 지역(LA Basin) 모델이다. 버전 16.5 플랫폼에는 5개의 모델링 방법론이 제시되고 있으며 본 연구에서는 Song 모델과 Exsim 모델을 사용하였다. 동일 규모의 지진이라 하더라도 지진발생 환경이 다른 지역(CEUS vs LA Basin)에서는 같은 진앙 거리에서 진도 2 등급에 가까운 차이가 발생할 수 있음을 본 연구를 통해서 발견하였다. 본 연구에서 나타난 지역별 진도 감쇠 특성의 차이를 감안할 때 한반도에서 좀 더 정밀한 지진재해 평가를 위해서는 지역에 적합한 진도 감쇠 특성을 이해하는 것이 중요할 것으로 판단되며 본 연구는 지역 특화된 진도 감쇠 특성을 고려하지 않을 경우 진도 감쇠 분포의 불확실성 정도를 잘 보여준다.

이중동축 메탄/공기 층류 부분 예혼합화염에서의 화염구조와 자발광 배출 특성;안쪽관 연료주입의 영향 (Flame Structure and Light Emission Characteristics in Coaxial Laminar Partially Premixed $CH_{4}/Air$ Flames;Effect of Central Fuel Injection)

  • 오정석;정용기;전충환;장영준
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 추계학술대회
    • /
    • pp.1116-1121
    • /
    • 2004
  • In this study, the effect of central fuel injection on a coaxial laminar $CH_{4}/air$ flame was experimented at the defined premixing condition(${\Phi}=1.90$, ${\sigma}=50/75/100%$, x/D=10). The partial premixing parameter are the equivalence ratio that total fuel is fixed at 200cc/min, the fuel split degree which means the percentage of fuel entering the outer tube to the total amount, and the mixing distance indicating the nonreactant mixture's homogeneity between inner tube top and burner exit. The object is to investigate the flame structure and chemiluminescence characteristics of laminar partial premixed flame as changing mixing parameters. The radical signal was acquired from ICCD camera and PMT. Each intensity was compared with Abel inverted value for measuring the effect of background light on the peak signal location and the intensity at central preheat zone. The results show that the peak location of each radical was broaden as the fuel split degree increasing because the mixing quality was enhanced. and $OH^{\ast}$ is a good indicator for flame front between reaction and preheat zone. At last $CH_{2}^{\ast}$ has the same tendency with $CH^{\ast}$ but a thinner reaction zone than $CH^{\ast}$ due to a rapid decay on the burned gas side.

  • PDF

CCD 카메라 영상을 이용한 스마트 화재 영상 인식 시스템 (Smart Fire Image Recognition System using Charge-Coupled Device Camera Image)

  • 김장원
    • 한국화재소방학회논문지
    • /
    • 제27권6호
    • /
    • pp.77-82
    • /
    • 2013
  • 본 연구에서는 유무선 TCP/IP 기능과 Pan/Tilt 기능을 갖는 Charge-Coupled Device (CCD) 카메라를 이용하여 화재발생 위치를 추적하고, 스마트 모바일 통신 기능을 탑재한 안드로이드 시스템에 실시간으로 정보를 전달하여 원거리에서 화재를 인식하고 재난을 제어할 수 있는 스마트 화재 인식 시스템을 제안하였다. 제안한 방법을 구현하기 위하여 첫째, 입력영상을 hue saturation intensity (HSI) 변환하여 주변 밝기와 잡영상들을 제거하여 순수한 화염만을 분할하는 알고리즘을 제안하였다. 둘째, Pan/Tilt 기능으로 화재가 발생한 위치를 정확하게 추적하여 적절하게 화재 인식을 할 수 있도록 하였다. 셋째, 모바일 기능을 탑재한 안드로이드 통신시스템으로 화재상황을 원격지에서도 확인할 수 있는 스마트한 화재 인식 시스템을 구현할 수 있도록 하였다. 제안한 방법을 확인하기 위하여 10개의 화재 동영상을 입력하고 실험을 수행한 결과 10개의 동영상에서 화재영역을 분할하고 화재 위치를 모두 추적하였다.

소규모 저속도 이상대 탐지를 위한 시추공 주시 토모그래피에서 잡음 영향 분석 (An Analysis of the Noise Influence on the Cross-well Travel-time Tomography to Detect a Small Scale Low Velocity Body)

  • 이두성
    • 지구물리와물리탐사
    • /
    • 제14권2호
    • /
    • pp.140-145
    • /
    • 2011
  • 데이터에 포함된 잡음이 소규모 저속도 이상대 탐지를 위한 시추공 주시토모그래피에 미치는 영향을 분석하기 위하여, 터널모델에 대하여 유한차분 파선추적 법으로 기록의 초동주시를 산출하고 산출된 초동주시에 세 종류의 잡음과 잡음수준이 다른 네 종류의 백색 잡음을 첨가한 후 SIRT 반복역산 법으로 속도영상을 도출하였다. 첨가된 잡음의 세기가 터널로 인한 기록의 최대 예상 주시지연의 10% 정도인 속도영상에서 저속도 이상대가 정확하게 터널위치에 형성되었다. 그러나 터널의 위치에 산출된 속도는 상정된 속도모델의 속도와는 현저하게 다르며 배경 속도와 비슷하였다. 잡음이 결과영상에 미치는 영향은 무작위 잡음이 송신기나 수신기 종속적인 잡음보다 현저하게 적은 것으로 나타났다.

2D-Video Distrometer를 이용한 강수의 물리적 특성에 관한 사례연구 (Case Study on the Physical Characteristics of Precipitation using 2D-Video Distrometer)

  • 박종길;천은지;정우식
    • 한국환경과학회지
    • /
    • 제25권3호
    • /
    • pp.345-359
    • /
    • 2016
  • This study analyze the synoptic meteorological cause of rainfall, rainfall intensity, drop size distribution(DSD), fall velocity and oblateness measured by the 2D-Video distrometer(2DVD) by comparing two cases which are heavy rainfall event case and a case that is not classified as heavy rainfall but having more than $30mm\;h^{-1}$ rainrate in July, 2014 at Gimhae region. As a results; Over the high pressure edge area where strong upward motion exists, the convective rain type occurred and near the changma front, convective and frontal rainfall combined rain type occurred. Therefore, rainrate varies based on the synoptic meteorological condition. The most rain drop distribution appeared in the raindrops with diameters between 0.4 mm and 0.6 mm and large particles appeared for the convective rain type since strong upward motion provide favorable conditions for the drops to grow by colliding and merging so the drop size distribution varies based on the location or rainfall types. The rainfall phases is mainly rain and as the diameter of the raindrop increase the fall velocity increase and oblateness decrease. The equation proposed based on the 2DVD tends to underestimated both fall velocity and oblateness compared with observation. Since these varies based on the rainfall characteristics of the observation location, standard equation for fall velocity and oblateness fit for Gimhae area can be developed by continuous observation and data collection hereafter.