• 제목/요약/키워드: location intensity

검색결과 465건 처리시간 0.021초

4-Valve SI 엔진의 Knock 특성 및 Knock 발생부위 측정 (Knock Characteristics and Measurement of Knock Location in a 4-Valve SI Engine)

  • 이경환;이시훈
    • 한국자동차공학회논문집
    • /
    • 제6권5호
    • /
    • pp.153-161
    • /
    • 1998
  • The knock in a spark ignition engine has been investigated to avoid the damage to the engine and unpleasant feeling caused by the pressure waves propagating across the combustion chamber. Knock intensity and knock onset angle were used as physical parameters to quantify the knock characteristics. The knock intensity is defined as a peak to peak value of the bank pass filtered combustion pressure signal and the knock onset angle is determined as the crank angle at which this signal exceeded the threshold level on each cycle. The cyclic variation of knock in four valve single cylinder engine was investigated with these two parameters. The location of autoignition was also examined by ion probes in the cylinder head gasket and squish region in the combustion chamber. For this measurement, a single cylinder engine was modified to accept the pressure transducer, 18 ion probes in the squish region and 8 ion probes in the specially designed PCB (Printed \ulcornerCircuit Board) cylinder head gasket.

  • PDF

영어 원어민과 비교한 한국인 학습자의 영어 문장 초점에 따른 영어 고성조 구현의 분석과 억양교육에 대한 시사점 (An Analysis of $H^*$ Production by Korean Learners of English according to the Focus of English Sentences in Comparison with Native Speakers of English and Its Pedagogical Implications)

  • 이서배
    • 말소리와 음성과학
    • /
    • 제3권3호
    • /
    • pp.57-62
    • /
    • 2011
  • Focused items in English sentences are usually accompanied by changes in acoustic manifestation. This paper investigates the acoustic characteristics of $H^*$ in English utterances produced by natives speakers of English and Korean learners of English. To obtain more reliable results, the changes of the acoustic feature values (F0, intensity, syllable duration) were normalized by a median value and a whole duration of each utterance. Acoustic values of sentences with no focused words were compared with those of sentences with focused words within each group (Americans vs. Koreans). Sentences with focused words were compared between the two groups, too. In the instances in which a significant Group x Focus Location (initial, middle and final of a sentence) interaction was obtained, further analysis testing the effect of Group on each Focus Location was conducted. The analysis revealed that Korean learners of English produced focused words with lower F0, lower intensity and shorter syllable duration than native speakers of English. However, the effect of intensity change caused by focus was not significant within each group. Further analysis examining the interaction of Group and Focus Location showed that the change in F0 produced by Korean group was significantly lower in the middle and the final positions of sentences than by American group. Implications for the intonation training were also discussed.

  • PDF

Optimization of Cutoff Shields in Projection Headlight Systems to Achieve High Intensity Gradient and Low Color Separation at the Cutoff Line

  • Joo, Byung-Yun;Ko, Jae-Hyeon
    • Journal of the Optical Society of Korea
    • /
    • 제20권1호
    • /
    • pp.118-124
    • /
    • 2016
  • The shape and location of the cutoff shield in a projection-type headlight system were optimized by a ray-tracing technique. A shield based on a Petsval surface showed better cutoff characteristics than a flat or cylindrical shield, such as a sharp intensity gradient and less color separation at the cutoff line. Adjustment of the shield’s location between the reflector and the aspheric lens further improved its cutoff characteristics.

유한요소법을 이용한 미끄럼 접촉시의 반무한체 내의 수평균열 전파해석 (Finite Element Analysis of Subsurface Crack Propagation in Half-space Due to Sliding Contact)

  • 이상윤;김석삼
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1999년도 제29회 춘계학술대회
    • /
    • pp.297-302
    • /
    • 1999
  • Finite element analysis is peformed about the crack propagation in half-space due to sliding contact. The analysis is based on linear elastic fracture mechanics and stress intensity factor concept. The crack location is fixed and the friction coefficient between asperity and half-space is varied to analyze the effect of surface friction on stress Intensity factor for horizontal crack. The crack propagation direction is predicted based on the maximum range of shear and tensile stress intensity factor.

  • PDF

음원 위치 검출기의 구현 (Implementation of Sound Source Location Detector)

  • 이종혁;김진천
    • 한국정보통신학회논문지
    • /
    • 제4권5호
    • /
    • pp.1017-1025
    • /
    • 2000
  • 인간의 청각시스템은 두 가지 요소 즉, ITD(Interaural Time Difference)와 IID(Interaural Intensity Difference)를 처리하여 음원의 위치와 추적을 하고 있다. 본 연구에서는 음원의 위치 검출을 위하여 ITD와 IID 뿐만 아니라 이전의 위치 정보를 이용하여 정확한 음원의 방향을 결정할 수 있는 TEPILD(Time Energy Previous Integration Location Detector) 모델을 제안하였다. TEPILD 모델에서 time function generator는 ITD, energy function generator는 IID를 처리할 수 있도록 하였다. 음원은 정현파(500Hz,1kHz, 2kHz, 3kHz), White noise, Pink noise, News, Music으로 하고 음원의 방향은 right, front right, front, front left, left로 하였다. 실험 결과 전체 평균 정확도가99.2로 좋은 결과를 얻을 수 있었으며, TEPILD가 음원 위치 검출기에 이용될 수 있음을 확인하였다.

  • PDF

Assessment of flow-accelerated corrosion-induced wall thinning in SA106 pipes with elbow sections

  • Seongin Moon;Jong Yeon Lee;Kyung-Mo Kim;Soon-Woo Han;Gyeong-Geun Lee;Wan-Young Maeng;Sebeom Oh;Dong-Jin Kim
    • Nuclear Engineering and Technology
    • /
    • 제56권4호
    • /
    • pp.1244-1249
    • /
    • 2024
  • A combination of flow-accelerated corrosion (FAC) tests and corresponding computational fluid dynamics (CFD) tests were performed to determine the hydrodynamic parameters that could help predict the highly susceptible location to FAC in the elbow section. The accelerated FAC tests were performed on a specimen containing elbow sections fabricated using commercial 2-inch carbon steel pipe. The tests were conducted at flow rates of 9 m/s under the following conditions: water temperature of 150 ℃, dissolved oxygen <5 ppb, and pH 7. Thickness reduction of the specimen pipe due to FAC was measured using ultrasonic testing. CFD was conducted on the FAC test specimen, and the turbulence intensity, and shear stress were analyzed. Notably, the location of the maximum hydrodynamic parameters, that is, the wall shear stress and turbulent intensity, is also the same location with maximum FAC rate. Therefore, the shear stress and turbulence intensity can be used as hydrodynamic parameters that help predict the FAC-induced wall-thinning rate. The results provide a method to identify locations susceptible to FAC and can be useful for determining inspection priority in piping systems.

NOAA/MUS 자료를 이용한 태풍 중심의 위치및 강도 분석 (The Analysis of Typhoon Center Location and Intensity from NOAA Satellite Microwave Data)

  • 신도식;서애숙;김용상;이미선
    • 대한원격탐사학회지
    • /
    • 제11권2호
    • /
    • pp.29-42
    • /
    • 1995
  • A typhoon center location and its intensity from the 54.96GMz channel of Microwave Sounding Unit(MSU) on board the NOAA satellite is analyzed. NOAA satellite MSU channel 3 data may delineate the development and dissipation of the upper tropospheric warm core associated with a typhoon. The typhoon warm core is related to microwave imagery of 250hPa temperature field (54.96GMz). The typhoon center intensity, surface center pressure and maximum wind speed at the eye well, correlate to horozontal Laplacian of an upper tropospheric temperature field. The typhoon center is found from the analysis of 250hPa temperature field. The excellent correlation is found between the horizontal Laplacian of an tropospheric temperature field and surface maximum wind speed, another correlation is found between the warm temperature anomaly and surface pressure anomaly.

운영부동산 유형별 리츠자산의 입지특성 분석에 관한 연구 (A study on the Analysis of Locational Characteristics of REITs Assets)

  • 정재연;이창수
    • 지역연구
    • /
    • 제40권1호
    • /
    • pp.89-110
    • /
    • 2024
  • 리츠는 부동산 운용과 매우 밀접한 관련이 있으나, 그동안 리츠자산 입지를 분석한 선행연구는 부재하다. 이에 본 연구는 리츠자산들의 공간정보를 활용하여 그 입지특성을 규명하고자 리츠자산의 입지특성을 두가지 측면에서 분석하였다. 첫째, 리츠자산이 분포하는 도시 유형특성을 분석하였고, 둘째, 리츠자산이 분포하는 용도지역 특성을 분석하였다. 유형별 리츠자산이 분포하는 도시특성을 분석한 결과, 수도권의 경우, 리츠자산 입지도시 비율과 리츠자산 입지강도(도시당 리츠자산개수) 모두 광역시>대도시>중소도시 순의 도시 위계별 입지특성이 있는 것으로 분석되었다. 비수도권의 광역시와 대도시의 경우, 리츠자산 입지도시비율이 수도권과 유사한 경우도 있으나 리츠자산 입지강도는 수도권 대비 현저하게 낮은 것으로 분석되었다. 유형별 리츠자산의 분석결과, 주택리츠 자산은 구도심 상업지역과 신도심 주거지역에 입지경향이 강하고, 오피스리츠 자산은 서울시 특정 상업지역에 입지가 편중되는 특징이 있으며, 리테일리츠 자산은 구도심 역세권 핵심 상업지역 중심으로 입지하고 있다. 그리고, 물류리츠 자산은 권역내 물류 핵심거점 도시를 중심으로 관리지역 입지경향이 높은 것으로 나타났다.

원공노치 인근에 발생한 결함의 위치변화가 균열성장률(da/dN) 및 응력확대계수범위(δK)의 관계에 미치는 영향 - 단일재 알루미늄과 Al/GFRP 적층재의 피로거동 비교 - (The Effect of Defect Location Near a Circular Hole Notch on the Relationship Between Crack Growth Rate (da/dN) and Stress Intensity Factor Range (δK) - Comparative Studies of Fatigue Behavior in the Case of Monolithic Al Alloy vs. Al/GFRP Laminate -)

  • 김철웅;고영호;이건복
    • 대한기계학회논문집A
    • /
    • 제31권3호
    • /
    • pp.344-354
    • /
    • 2007
  • The objective of this study is to investigate the effect of arbitrarily located defect around the circular hole in the aircraft structural material such as Al/GFRP laminates and monolithic Al alloy sheet under cyclic bending moment. The fatigue behavior of these materials may be different due to the defect location. Material flaws in the from of pre-existing defects can severely affect the fatigue crack initiation and propagation behavior. The aim of this study is to evaluate effects of relative location of defects around the circular hole in monolithic Al alloy and Al/GFRP laminates under cyclic bending moment. The fatigue behavior i.e., the stress concentration factor($K_t$), the crack initiation life($N_i$), the relationship between crack length(a) and cycles(N), the relationship between crack growth rate(da/dN) and stress intensity factor range(${\Dalta}K$) near a circular hole are considered. Especially, the defects location at ${\theta}_1=0^{\circ}\;and\;{\theta}_2=30^{\circ}$ was strongly effective in stress concentration factor($K_t$) and crack initiation life($N_i$). The test results indicated the features of different fatigue crack propagation behavior and the different growing delamination shape according to each location of defect around the circular hole in Al/GFRP laminates.

환형 장애물로 인한 전자파 세기 변화 (The Intensity variation of the Electromagnetic wave by Ring type Obstacles)

  • 류수현;이재우;홍의석
    • 한국통신학회:학술대회논문집
    • /
    • 한국통신학회 1988년도 추계학술발표회 논문집
    • /
    • pp.114-117
    • /
    • 1988
  • In mobile radio communication system involving geostationary satellites the field intensity of electromagnetic wave varies with frequency shape and location of an obstacle between a tramamitter and a receiver. In this paper a ring type obstacle between the propagation paths is presented. On the basis of Fresnel diffraction theory, the field intensity varying with ring-type obstacle’s radius is obtained by computer simulation.]

  • PDF