• 제목/요약/키워드: location factor

검색결과 1,454건 처리시간 0.027초

다단자 송전계통에서의 1선지락 고장시 고장점 표정 알고리즘 (A Fault Location Algorithm for a Single Line Ground Fault on a Multi-Terminal Transmission Line)

  • 강상희;노재근;권영진
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제52권2호
    • /
    • pp.121-133
    • /
    • 2003
  • This paper presents a fault location algorithm for a single phase-to-ground fault on 3-terminal transmission systems. The method uses only the local end voltage and current signals. Other currents used for the algorithm are estimated by current distribution factors and the local end current. Negative sequence current is used to remove the effect of load current. Five distance equations based on Kirchhoff's voltage law are established for the location algorithm which can be applied to a parallel transmission line having a teed circuit. Separating the real and imaginary parts of each distance equation, final nonlinear equations that are functions of the fault location can be obtained. The Newton-Raphson method is then applied to calculate the estimated fault location. Among the solutions, a correct fault distance is selected by the conditions of the existence of solution. With the results of extensive S/W and H/W simulation tests, it was verified that the proposed algorithm can estimate an accurate fault distance in a 154kV model system.

소비자가 인식하는 아파트 구매가격결정요인과 쾌적성 결정요인과의 순위적 관계분석 (An Analysis of Rank Correlation between the Apartment Purchase Price Decision Factor and Amenity decision Factor with cognition of the Consumer.)

  • 김형돈
    • 한국주거학회논문집
    • /
    • 제12권2호
    • /
    • pp.45-54
    • /
    • 2001
  • The purpose of this research was to analyze the correlation between the Apartment Purchase Price Decision Factor and Amenity decision Factor with cognition of the Consumer. The result are as follows; 1. The correlation coefficient between the Apartment Price Decision Factor and Amenity decision Factor with cognition of the Consumer was 0.587. 2. The ranking of the purchase price factor which it prefers were analyzed orientation > sunlight > view > the rising price expectation > natural environment etc. And the ranking of the amenity were analyzed orientation > natural environment > view > sunlight > noise etc. 3. Consumer group was classified the location, sex, year of ages and unit scale. The rank correlation coefficient of (the significant was below 0.05) sex was 0.617~0.644, year of ages was 0.62~0.771 and unit scale was 0.762~0.852. This research proved the fact that the amenity correlated with the apartment purchase price decision factor, so amenity contained an economic value. And this result will be used in decision-making-process of apartment construction.

  • PDF

韓國 纖維工業의 技術變化와 立地에 관한 연구 (A study on the technological and locational changes of textile industry in Korea)

  • 김선배
    • 대한지리학회지
    • /
    • 제38권
    • /
    • pp.37-59
    • /
    • 1988
  • The aim of this study is to investigate the influence of the technological changes on locational changes on the assumption that technological changes cover over all industrial sectors. The study is carred on 1) To investigate the theoretical backgrounds of the technological and locational changes and their problems. 2) To investigate the location and economic characteristics of the Korean textile industry. 3) To investigate the technological development and regional variations in technological level. 4) To the relationship of the technological change to the location of the textile industries. The locational change of the Korean textile industries have been closely related to economic characteristics. In the begining stage of development in the 1950's, thetextile industries were largely concentrated in the major cities(Seoul, Pusan, Taegu, Masan et. al.). In the growing stage of development in the 1960's, the textile industries were relocated in suburban areas with the trend of large corporations building their branch plants of chemical fibers in the suburbs. With the expansion in the export industry in the 1970's, the textile companies were distributed throughout the whole country. But the research and development(R&D) activities caused the textile industries reconcentrate around Seoul and Pusan, owining to the change of the economic environments in the 1980's. The 1980's have witnessed the increased R&D investment for the development of better new and value-added products. This was because the technological level was much higher than that of Taegu and Other regions. What is more, plant birth location and branch plant location support that locational changes of textile industry were caused by technological changes. Plant birth location put stress technological environments of region, compared with branch plant locaiton. Accordingly, the technological changes of industry can be an important factor in locational changes. Through this study, it can be seen that locational changes come from technological changes. Other locational factors influence the industrial locations, but regional variations in technological level which has been relatively ignored has to be considered on the location study. Together with the accomplishments of existing location study, the study on technological change and location can better explain the location phenomena. And further research on technological change and location can provide better policy implications for regional development.

  • PDF

밸브 하류에 설치된 건식 초음파유량계의 편차특성 (Deviation Characteristics of Clamp-on Type Ultrasonic Flowmeter Installed in Downstream of Valves)

  • 이동근;조용
    • 한국유체기계학회 논문집
    • /
    • 제15권4호
    • /
    • pp.12-18
    • /
    • 2012
  • This study was performed to found out the deviations for clamp-on type ultrasonic flowmeter installed in downstream of valves. It was selected three types of two-path flowmeter mainly used for K-water as test. Experiment carried out to confirmed characteristics of deviation depending on the sensor location, straight pipe length and maker for 1-path, 2-path and 4-path combined 2-path flowmeter. It was selected two kinds of valves with 100 % and 50 % opening, butterfly valves and gate valves, for flow disturbance factor. Finally, we suggested number of sensors by maker, straight pipe length and installed location of sensors satisfying the tolerance depending on the experiment results.

아파트의 가격형성 메커니즘에 관한 연구 (A Study on the Equilibrium-Pricing Mechanism of Apartment)

  • 정재영;윤태권
    • 한국건축시공학회지
    • /
    • 제8권6호
    • /
    • pp.65-74
    • /
    • 2008
  • The aim is to get comprehensive view point for the price of apartment. Apartment construction cost is the sun of land cost and building cost. Land price reflects the value of location where building stands. When the gap between price and affordability is narrow enough, effective demand promote apartment construction. The today's trends of rising price, which began in apartment housing, spreads to real estates market and finally overall consumer price. Problem is that price is decided only by supplier's interest. Equilibrium-pricing is common process in housing market. However it is important to review hedonic price and the factor of housing services and focused on the affordability of demanders. AHP analysis was used to study real needs and preference of demanders and dealt with 200 interviewees with brief checklists. We found that social factor is more important than building cost or site development. Especially location of apartment is most important to affect environment quality and accessibility to facilities.

부동산중개업 구성요소와 서비스 가치, 재이용의도, 구전효과와의 관계에 관한 연구 (Study on the Relation of Real Estate Business member on Service value, Reuse intent, Word of mouth effect)

  • 신광식
    • 한국전자통신학회논문지
    • /
    • 제5권6호
    • /
    • pp.657-663
    • /
    • 2010
  • 본 연구는 부동산중개업을 하는데 필요한 중요 구성요소를 도출하여 서비스 가치, 고객의 재이용의도, 구전효과와의 관계를 검증하여 고객들이 원하는 구성요소가 무엇인지를 분석하였다. 그 결과 중개업자의 능력과 중개업자의 신뢰성, 중개업소의 위치가 중요한 구성요소임을 검증한 반면 중개업소의 환경은 그다지 중요하지 않는 것으로 검증되었다. 따라서 고객들이 생각하는 가장 중요한 요소는 중개업자의 능력이므로 이에 대한 대비책 강구가 필요하였다.

유한요소해에 기초한 물성평가 압입이론 (An Indentation Theory Based on FEA Solutions for Property Evaluation)

  • 이형일;이진행
    • 대한기계학회논문집A
    • /
    • 제25권11호
    • /
    • pp.1685-1696
    • /
    • 2001
  • A novel indentation theory is proposed by examining the data from the incremental plasticity theory based finite element analyses. First the optimal data acquisition location is selected, where the strain gradient is the least and the effect of friction is negligible. This data acquisition point increases the strain range by a factor of five. Numerical regressions of obtained data exhibit that strain hardening exponent and yield strain are the two main parameters which govern the subindenter deformation characteristics. The new indentation theory successfully provides the stress-strain curve with an average error less than 5%.

지수치를 이용한 노년여성 체형유형화에 관한 연구 (A Study of Body Form Classification on Eldlerly Women Using Body Indices)

  • 이경희;최혜섭
    • 한국의류학회지
    • /
    • 제18권4호
    • /
    • pp.560-565
    • /
    • 1994
  • The purpose of this study was to extract information of body form's classification on elderly women. We measured 242 subjects from 55 to 75 years of age, using 27 direct measurement items and 25 body indices. We analyzed these indices with factor analysis, cluster analysis We obtained these following results 1) Through factor analysis, 4 factors (obesity of torso, location of upper torso items, length of upper torso, location of lower torso items & shoulder length) were extracted from body indices. 2) Through culster analysis, we categorized 4 clusters. Namely, type 1, characterized the best slender type, type 2; characterized obesity type, type 3: characterized middle sized type ; type 4: characterized by fat type less than type 2. We considered that type 3 is the typical type on elderly women. Since analysis using indices is very profitable, it may be necessary to design dummies and patterns for clothing manufacture.

  • PDF

증분소성이론에 준한 새 압입이론 (A Novel Indentation Theory Based on Incremental Plasticity Theory)

  • 이형일;이진행
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 추계학술대회논문집A
    • /
    • pp.185-192
    • /
    • 2000
  • A novel indentation theory is proposed by examining the data from the incremental plasticity theory based finite element analyses. First the optimal data acquisition location is selected, where the strain gradient is the least and the effect of friction is negligible. This data acquisition point increases the strain range by a factor of five. Numerical regressions of obtained data exhibit that strain hardening exponent and yield strain are the two main parameters which govern the subindenter deformation characteristics. The new indentation theory successfully provides the stress-strain curve with an average error less than 3%.

  • PDF

열병합발전 아파트의 난방조절방식과 온열환경 (Thermal Environment and Heating Regulation System of the Co-Generation Apartment)

  • 윤정숙
    • 대한가정학회지
    • /
    • 제30권3호
    • /
    • pp.131-140
    • /
    • 1992
  • The purpose of this study was to investigate the heating regulation systems and the thermal environment of the Co-Generation apartment house in winter. Personal self-administration and interview method were used in the survey of this study. The respondents were 352 housewives who resided in Mokdong apartement using Co-Generation heating systems. Data was analyzed using SPSS PC+ computer package. The results of this study were summarised as follow; The typical patterns of heating regulation systems were intermittent and partial heating in the living room and bedroom exclusive of kitchen area. The present condition of the thermal environment were relatively warm in winter and Heatng regulation systems were influenced by type of location. Determinants of the thermal sensation and thermal comfort were the type of location of apartment as a architectural factor, clo as a personal factor.

  • PDF