• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.109-112
• /
• 2001

The specific goal of this research is to develop a non-contact measurement technique of stress waves propagating in a rotating shaft. This technique will enable on-line damage detection in shafts in power-generating systems. To minimize measurement errors due to shaft rotation, we have employed magnetostrictive sensors. The sensors are not only cost-effective but also insensitive to liftoff or fill factors. Several experimental results showed the effectiveness of the present technique. The damage location in a rotating shaft was accurately predicted by the wave signal measured by the present approach.

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2063-2065
• /
• 1999

PD pulses have about one nanosecond rise time in the $SF_6$ gas insulation. These pulses propagate through GIS chamber to PD sensors in the form of the electromagnetic radiation. In this paper, we investigated the characteristics of disc sensors and monopole antenna, by putting high frequency signals into the test cell in $SF_6$ gas by means of a Ins rise time pulse generator and 60Hz power supply respectively. Also, we measured PD quantity from the needle electrode and the location effect of output terminal beneath the disk sensors.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.278-279
• /
• 2018

Due to the frequent occurrence of dangerous wild animals in rural or mountainous areas. it has been increasing damage of crops in every year. Fight bell or electric fence is typically installed to chase those wild animals. But there are problems that it is impossible to drive out birds and spends high installation and maintenance cost. In addition, it is inefficient to the risk of electric shock effect. In this study, the proposed system can drive out hazardous wildlife and birds regardless of installation location through realtime detection with the multi-sensing based IoT platform technology. This study showed a very large significance effect that can reduce crop damage by wildlife and birds.

• Nuclear Engineering and Technology
• /
• v.46 no.6
• /
• pp.875-882
• /
• 2014

In terms of safety and the efficient management of spent fuel storage, detecting failed fuel is one of the most important tasks in a CANada Deuterium Uranium (CANDU) reactor operation. It has been successfully demonstrated that in a CANDU reactor, on-power failed fuel detection and location systems, along with alarm area gamma monitors, can detect and locate defective and suspect fuel bundles before discharging them from the reactor to the spent fuel storage bay. In the reception bay, however, only visual inspection has been used to identify suspect bundles. Gaseous fission product and delayed neutron monitoring systems cannot precisely distinguish failed fuel elements from each fuel bundle. This study reports the use of a sipping system in a CANDU reactor for the integrity assessment of spent fuel bundles. The integrity assessment of spent fuel bundles using this sipping system has shown promise as a nondestructive test for detecting a defective fuel bundle in a CANDU reactor.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.4
• /
• pp.31-37
• /
• 2011

Recently, MANET(Mobile Ad-hoc Network) is developing increasingly in the wireless network. MANET has weakness because phases change frequently and MANET doesn't have middle management system. Every node which consists of MANET has to perform data forwarding, but traceback is not reliable if these nodes do malicious action owing to attack. It also is not easy to find location of attacker when it is attacked as moving of nodes. In this paper, we propose a hierarchical-based traceback method that reduce waste of memory and can manage path information efficiently. In order to manage trace path information and reduce using resource in the cluster head after network is formed to cluster, method which recomposes the path efficiently is proposed. Proposed method in this paper can reduce path trace failure rate remarkably due to moving of nodes. It can also reduce the cost for traceback and time it takes to collect information.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.10
• /
• pp.947-954
• /
• 2012

Sand scorpions are nocturnal animals to mostly use tactile senses to detect their prey. It has been reported that sand scorpions have high vibration sensitivity for their prey-localizing behavior. We tested vibration experiments in the sand with microphone sensors to model the sand scorpion's behavior and a time-difference model was applied to find the direction of a vibration source. Using the information of the arrival time of the vibration signal to reach each leg position, we can find the location of the vibration source.

• International journal of advanced smart convergence
• /
• v.5 no.4
• /
• pp.57-65
• /
• 2016

This paper aims to improve the quality of cultural experience by providing a three - dimensional guide service that enables users to experience themselves without additional guides and cultural commentators using the latest mobile IT technology to enhance understanding of cultural heritage. In this paper, we propose a method of constructing cultural contents based on location information such as user / cultural heritage using markerless tracking based augmented reality and GPS. We use marker detection technology and markerless tracking technology to recognize smart augmented reality object accurately and accurate recognition according to the state of cultural heritage, and also use Android's Google map to locate the user. The purpose of this paper is to produce content for introducing cultural heritage using GPS and augmented reality based on Android. It can be used in combination with various objects beyond the limitation of existing augmented reality contents.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.95-96
• /
• 2006

A variety of systems have been attempted for effective urban management. In this paper, we introduce integrated urban management system (IUMS), which mainly consists of optical line terminal (OLT), optical network terminal (ONTs) and wireless access points (APs), by combining passive optical network (PON) and radio over fiber (RoF) technologies so as to take advantages of both two systems. Further, several IUMS services including disaster detection and prevention system (DDPS), bus information system (BIS) and real time location system (RTLS) are demonstrated in order to employ IUMS for the realization of future ubiquitous city (U-city).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.2
• /
• pp.148-151
• /
• 2007

The CF(Counter-fire) is neutralizing enemy's all command control systems and fire support elements. It will weaken a battle continuous ability and an intension to fight. At the beginning of the CF is obtaining locations of targets using various detection assets. CF command center processes acquired target information and send it to attacking equipments. The targets are classified into two classes, preplanned target and target of opportunity The target of opportunity is potential threaten, so it needs to take a immediate and exact process for determining location of target of opportunity. This paper proposes the real-time processing algorithm for offensive weapons to strike target of opportunity, and presents the result of its performance.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.4
• /
• pp.258-262
• /
• 2017

Recently energy consumption has been increasing because of advances in the industry, and electrical fires have accounted for 31.9% of all fire accidents. An electrical fire is caused by a short circuit, power surge, or poor contact. Safety devices for short circuits or power surges are currently mandatory and can actually detect problems, but arcing caused by contact failure is difficult to detect in advance. This study used an IR sensor to detect the heat concentration caused by the arc. The data from the low-resolution sensor was amplified as much as four times by interpolation to find the exact location of the heat source and were then investigated.