• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.611-617
• /
• 2018

The application of health monitoring, including a fault detection technique, is needed to secure the structural safety of large structures. A 2-step crack identification method for detecting the crack location and size of the beam structure is presented. First, a crack occurrence region was estimated using the modified Laplacian operator for the strain mode shape obtained from the distributed local strain data. The crack location and size were then identified based on the natural frequencies obtained from the acceleration data and the neural network technique for the pre-estimated crack occurrence region. The natural frequencies of a cracked beam were calculated based on an equivalent bending stiffness induced by the energy method, and used to generate the training patterns of the neural network. An experimental study was carried out on an aluminum cantilever beam to verify the present method for crack identification. Cracks were produced on the beam, and free vibration tests were performed. A crack occurrence region was estimated using the modified Laplacian operator for the strain mode shape, and the crack location and size were assessed using the natural frequencies and neural network technique. The identified crack occurrence region agrees well with the exact one, and the accuracy of the estimation results for the crack location and size could be enhanced considerably for 3 damage cases. The presented method could be applied effectively to the structural health monitoring of large structures.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.92-96
• /
• 2003

Dielectric apertures in vertical cavity laser have been used for improved device performance. Numerical analysis is used to estimate the optical losses as the aperture diameter is reduced. The optical losses depend on the aperture size, thickness and location. The optical loss strongly depend on the aperture size and thickness when the aperture size is similar or smaller than the emitted wavelength. The optical loss is negligible and not depend on the aperture thickness when the aperture size is larger than 5 times emitted wavelength.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.17-27
• /
• 2011

This paper investigates some critical errors influencing travel demand estimation in Korea Transportation Data Base (KTDB), and through this investigation reasonable traffic analysis zone (TAZ) size and internal trips ratio are analyzed. With varying zone size, the accuracy of travel demand estimation is studied and appropriate level of zone size in KTDB is also presented. For this purpose zonal structure consisting of location of zone centroid, number of centroid connecters has been constructed by social economic index, and then some descriptive statistical analyses such as F-test, coefficient of correlation are performed. From the results, this paper shows that the optimum levels of zone system were various according to the order and capacity of roads, and also shows that the smaller TAZ, the less error in this research. In conclusion, in order to improve accuracy of traffic demand estimation it is necessary to make zone size smaller.

• Communications for Statistical Applications and Methods
• /
• v.30 no.1
• /
• pp.37-48
• /
• 2023

Shape analysis is a method for measuring, describing and comparing the shape of objects in geometric space. An important aspect is to obtain Procrustes distance based on least square method. We note that the shape is all the geometrical information that remains when location, scale and rotational effects are filtered out from an object. However, and unfortunately, when we cannot measure some landmarks which are some biologically or geometrically meaningful points of any object, it is not possible to measure the variation of all shapes of an object, including that of the incomplete object. Hence, we need to replace the missing landmarks. In particular, Albers and Gower (2010) studied the missing rows of configurations in Procrustes analysis. They noted that the convergence of their approach can be quite slow. In this study, alternatively, we derive an algorithm for estimating the missing landmarks based on the pre-shapes. The pre-shape is invariant under the location and scaling of the original configuration with the centroid size of the pre-shape being one. Therefore we expect that we can reduce the amount of total computing time for obtaining the estimate of the missing landmarks.

• Journal of Broadcast Engineering
• /
• v.21 no.2
• /
• pp.252-260
• /
• 2016

The performance of human detection system is affected by camera location and view angle. In 2D image acquired from such camera settings, humans are displayed in different sizes. Detecting all the humans with diverse sizes poses a difficulty in realizing a real-time system. However, if the size of a human in an image can be predicted, the processing time of human detection would be greatly reduced. In this paper, we propose a method that estimates human size by constructing an indoor scene in 3D space. Since the human has constant size everywhere in 3D space, it is possible to estimate accurate human size in 2D image by projecting 3D human into the image space. Experimental results validate that a human size can be predicted from the proposed method and that machine-learning based detection methods can yield the reduction of the processing time.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.1
• /
• pp.57-67
• /
• 2008

In this paper, we present an adaptive block matching motion estimation using optical flow. In the proposed algorithm, we calculate the temporal and spatial gradient value for each pixel value from tile differential filter, and estimate the optical flow which is used to decide the location and the size of the search region from the gradient values by least square optical flow algorithm. In particular, the proposed algorithm showed a excellent performance with fast and complex motion sequences. From the computer simulation for various motion characteristic sequences. The proposed algorithm shows a significant enhancement of PSNR over previous blocking matching algorithms.

• International journal of advanced smart convergence
• /
• v.3 no.2
• /
• pp.14-17
• /
• 2014

Precision agriculture relies on information technology, whose precondition is providing real-time and accurate information. It depends on various kinds of advanced sensors, such as environmental temperature and humidity, wind speed, light intensity, and other types of sensors. Currently, it is a hot topic how to collect accurate information, the main raw data for agricultural experts, monitored by these sensors timely. Most existing work in WSNs addresses their fundamental challenges, including power supply, limited memory, processing power and communication bandwidth and focuses entirely on their operating system and networking protocol design and implementation. However, it is not easy to find the self-localization capability of wireless sensor networks. Because of constraints on the cost and size of sensors, energy consumption, implementation environment and the deployment of sensors, most sensors do not know their locations. This paper provides maximum likelihood estimators for sensor location estimation when observations are time-of arrival (TOA) range measurement.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.315-318
• /
• 2007

Non-Destructive Health Monitoring using PZT sensors is a major concern and has great significance for research about NDT (Non-Destructive Test). In this paper, we study about the guided wave measurement method using PZT sensors to find cracks and estimate locations. Two aluminum beams bonded with PZT sensors were tested for estimating about the guided wave propagation characteristics and shape of each beam are decided in terms of analytical purpose. NI Signal Acquisition Device and specially designed LabVIEW VI program were used for data acquisition and analysis. The measured data were progressed by using a high-pass filtering.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.2
• /
• pp.81-86
• /
• 2009

Infrared thermography was used to determine the location, size, and depth of defects under the surface of M.C nylon. Defects were created in a specimen by back-drilling circular holes. These defects were located at the maximum temperature difference that occurred. The sizes of the defects could be calculated by means of the full width at half of the maximum temperature difference. The depth of a defect could be calculated by the peak time and the maximum temperature difference. The maximum temperature difference between a defect and normal part was decreased with the depth of the defect. And the peak time also slowly appeared with the depth of the defect.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.1
• /
• pp.87-96
• /
• 2011

Carbon emissions and storages that are strongly related to global warming has have emerged as one of the important issues while many governments and researchers have been interested in climate change and pollution. In this regards, forest biomass estimation is quite importance since forest biomass works as an important medium of the global carbon cycle between the atmosphere and soil. Forest biomass estimation through field survey needs lots of time and labors, and has accessibility issues. Hence, many researchers have focused on the forest biomass approaches based on remotely sensed data. This research comprehensively reviewed forty one international studies using remote sensing data according to five different categories (i.e., location of study area, size of study area, biome, used remote sensing data, and estimation technology). It would be expected that the results of this study can be used for suggesting domestic research directions; domestic research in this field is at the beginning stage in terms of level of technologies and useful materials. As results, 39% out of the reviewed studies used the areas located in North America. 59% out of the researches dealt with small size of the study areas (less than 3,600km2). In case of biome, around 30% of the studies focused on the boreal/taiga areas. Moreover, 35% and 16% of the studies were carried out using Landsat series and Lidar data, respectively. Finally, regression analysis method was most frequently used for forest biomass estimation by 71% out of 41 studies.