• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.7
• /
• pp.2685-2691
• /
• 2015

To evaluate the clinical impact of preoperative serum CEA and CA19-9 on resectable gastric cancer (GC), a total of 1,075 consecutive cases with gastric adenocarcinoma were obtained retrospectively from January 2012 and December 2013 in a single tertiary hospital, and the relationships between serum CEA, CA19-9 and clinicopathologic features were investigated. Positive preoperative serum rates of CEA and CA19-9 were 22.4% and 12.3% respectively, levels significantly correlating with each other and depth of invasion, lymph node involvement, pTNM and stage. The CEA level also presented a remarkable association with lymphovascular invasion. Both CEA and CA19-9 positivity significantly and positively correlated with depth of invasion, nodal involvement, pTNM stage, lymphovascular invasion, tumor size and tumor location. Stratified analyses according to gender or tumor location showed preoperative CEA or CA19-9 had different associations with clinicopathologic features in different gender subgroups or location subgroups. Preoperative serum CA19-9 positivity may be more meaningful for tumor size rather than CEA. In conclusion, preoperative serum CEA and CA19-9 correlate with disease progression of GC, and may have applications in aiding more accurate estimation of tumor stage, decision of treatment choice and prognosis evaluation.

• International Journal of Highway Engineering
• /
• v.16 no.3
• /
• pp.119-129
• /
• 2014

PURPOSES : This investigational survey is to observe a proper spatial aggregation method for path travel time estimation using the hi-pass DSRC system. METHODS : The links which connect the nodes of section detectors location are used for path travel time estimation traditionally. It makes some problem such as increasing accumulation errors and processing times. In this background, the new links composition methods for spatial aggregation are considered by using some types of nodes as IC, JC, RSE combination. Path travel times estimated by new aggregation methods are compared with PBM travel times by MAE, MAPE and statistical hypothesis tests. RESULTS : The results of minimum sample size and missing rate for 5 minutes aggregation interval are satisfied except for JC link path travel time in Seoul TG~Kuemho JC. Thus, it was additionally observed for minimum sample size satisfaction. In 15, 30 minutes and 1 hour aggregation intervals, all conditions are satisfied by the minimum sample size criteria. For accuracy test and statistical hypothesis test, it has been proved that RSE, Conzone, IC, JC links have equivalent errors and statistical characteristics. CONCLUSIONS : There are some errors between the PBM and the LBM methods that come from dropping vehicles by rest areas. Consequently, this survey result means each of links compositions are available for the estimation of path travel time when PBM vehicles are missed.

• International Journal of Contents
• /
• v.8 no.1
• /
• pp.30-38
• /
• 2012

Text extraction and binarization are the important pre-processing steps for text recognition. The performance of text binarization strongly related to the accuracy of recognition stage. In our proposed method, the first stage based on line detection and shape feature analysis applied to locate the position of a business card and detect the shape from the complex environment. In the second stage, several local regions contained the possible text components are separated based on the projection histogram. In each local region, the pixels grouped into several connected components based on the connected component labeling and projection histogram. Then, classify each connect component into text region and reject the non-text region based on the feature information analysis such as size of connected component and stroke width estimation.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.843-846
• /
• 2000

An optical flow-based motion estimation algorithm is proposed for video coding. The algorithm uses block-matching motion estimation with an adaptive search region. The search region is computed from motion fields that are estimated based on the optical flow. The algorithm is based on the fact that true block-motion vectors have similar characteristics to optical flow vectors. Thereafter, the search region is computed using these optical flow vectors that include spatial relationships. In conventional block matching, the search region is fixed. In contrast, in the new method, the appropriate size and location of the search region are both decided by the proposed algorithm. The results obtained using test images show that the proposed algorithm can produce a significant improvement compared with previous block-matching algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.553-558
• /
• 2003

The boundary estimation problem is used to estimate the shape of organic depend on the phase of the cardiac cycle or interested in the detection of the location and size of anomalies with resistivity values different from the background tissues such as nuclear reactor. And we can use the method to solve the optimal solution such as modified Newton raphson, kalman filter, extended kalman filter, etc. But, this method consumes much time and is sensitive to the initial value and noise in the estimation of the unknown shape. In the paper, we propose that multi-layer neural networks estimate the boundary of the unknown object using Fourier coefficient. This method can be used at the real time estimation and have strong characteristics at the noise and initial value. It uses voltage change; difference the homogeneous voltage to the non-homogeneous voltage, and change of Fourier coefficient change to train multi-layer neural network. After train, we can have real time estimation using this method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.32-40
• /
• 2016

IEEE 802.15.4 is the one of the protocols for radio communication in a personal area network. Because of low cost and low power communication for IoT communication, it requires the highest optimization level in the implementation. Recently, the studies of location aware algorithm based on IEEE802.15.4 standard has been achieved. Location estimation is performed basically in equal consideration of reference node information and blind node information. However, an error is not calculated in this algorithm despite the fact that the coordinates of the estimated location of the blind node include an error. In this paper, we enhanced a conventual maximum likelihood estimation using weighted coefficient and implement the hardwired location aware engine for small code size and low power consumption. On the field test using test-beds, the suggested hardware based location awareness method results better accuracy by 10 percents and reduces both calculation and memory access by 30 percents, which improves the systems power consumption.

• Journal of the Korean Data and Information Science Society
• /
• v.13 no.2
• /
• pp.251-260
• /
• 2002

The aim of this paper is to consider of detecting the location, the jump size and the number of change-points in regression functions by using the local linear fit which is one of nonparametric regression techniques. It is obtained the asymptotic properties of the change points and the jump sizes. and the correspondin grates of convergence for change-point estimators.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.849-856
• /
• 2020

The Angle-of-Arrival(AOA) information for an array antenna receiver is one of the important factors for estimating the location of specific signals and detecting signals efficiently, in various situations. The AOA estimator in the satellite environment can rapidly calculate the AOA information in the wide area, utilizing a planar (grid, circular) array antenna mounted on the satellite. Since the satellite receiver has the limitation of the array antenna size, the concentric circular (ring) array (CCA or CRA) antenna structure with comparatively small size but with multiple antenna elements is more efficient than the uniform circular array (UCA) structure, for the satellite environment. In this paper, we introduce a cascade AOA estimation algorithm based on CRA, consisting of CAPON and Beamspace MUSIC. In addition, we provide computer simulation examples for verifying the estimation performance of the cascade AOA estimation algorithm based on CRA and compare it to the case of UCA.

• Earthquakes and Structures
• /
• v.8 no.4
• /
• pp.821-841
• /
• 2015

This paper proposes a two-stage imaging approach for quantitative inspection of damages in metallic plates using the fundamental anti-symmetric mode of ($A_0$) Lamb wave. The proposed approach employs a number of transducers to transmit and receive $A_0$ Lamb wave pulses, and hence, to sequentially scan the plate structures before and after the presence of damage. The approach is applied to image the corrosion damages, which are simplified as a reduction of plate thickness in this study. In stage-one of the proposed approach a damage location image is reconstructed by analyzing the cross-correlation of the wavelet coefficient calculated from the excitation pulse and scattered wave signals for each transducer pairs to determine the damage location. In stage-two the Lamb wave diffraction tomography is then used to reconstruct a thickness reduction image for evaluating the size and depth of the damage. Finite element simulations are carried out to provide a comprehensive verification of the proposed imaging approach. A number of numerical case studies considering a circular transducer network with eight transducers are used to identify the damages with different locations, sizes and thicknesses. The results show that the proposed methodology is able to accurately identify the damage locations with inaccuracy of the order of few millimeters of a circular inspection area of $100mm^2$ and provide a reasonable estimation of the size and depth of the damages.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.124-127
• /
• 2000

The finite element analyses of the wrinkling initiation and growth in the sheet metal forming process provide the detailed information about the wrinkling behavior of sheet metal. The direct analyses of the wrinkling initiation and growth, however, bring about a little difficulty in complex industrial problems because it needs large memory size and long computation time. For the description of wrinkling growth, the mesh elements should be sufficiently small and the size of finite element matrix becomes large. In the static implicit finite element method therefore, the direct analysis of wrinkling growth in a complex sheet metal forming process is rather difficult. From the industrial viewpoint of tooling design, the readily available information of possibility and location of wrinkling is sometimes more preferable to the detailed time-consuming information. In the present study, therefore, the wrinkling factor that shows locations and relative possibility of wrinkling initiation is proposed as a convenient tool of relative wrinkling estimation based on the energy criterion. The location and relative possibility of wrinkling initiation are predicted by calculating the wrinkling factor in various sheet metal forming processes such as cylindrical cup deep drawing, spherical cup deep drawing, and elliptical cup deep drawing. The wrinkling factor is also implemented in the analysis of the door inner stamping process to predict wrinkling.