• 한국통신학회논문지
• /
• 제21권5호
• /
• pp.1109-1122
• /
• 1996

Generally, moving images contain the various components in motions, which reange from a static object and background to a fast moving object. To extract the accurate motion parameters, we must consider the various motions. That requires a wide search egion in motion estimation. The wide search, however, causes a high computational complexity. If we have a few knowledge about the motion direction and magnitude before motion estimation, we can determine the search location and search window size using the already-known information about the motion. In this paper, we present a local adaptive motion estimation approach that predicts a block motion based on spatio-temporal neighborhood blocks and adaptively defines the search location and search window size. This paper presents a technique for reducing computational complexity, while having high accuracy in motion estimation. The proposed algorithm is introduced the forward and backward projection techniques. The search windeo size for a block is adaptively determined by previous motion vectors and prediction errors. Simulations show significant improvements in the qualities of the motion compensated images and in the reduction of the computational complexity.

• 대한인간공학회지
• /
• 제9권1호
• /
• pp.35-42
• /
• 1990

This study is concerned with the accuracy, of error with which subjects can interpolate the location of a target between two graduation markers with 4 orientations and 6 sizes CRT display. Stimuli were graphic images on CRT with a linear, end-markec, ungraduated scales having a target. The location of a target is estimated in units over te range 1-99. Smallest error of estimates was at the near ends and middle of the base-line. The median error was less than 2 units, modal error was 1, and the most error (; 99.7%) was within 10. A proper size to make an minimum error in interpolation exists such that size 400 pixels. Interpolation estimation is shown to be affected by the size, location and interaction (orientation x location, size x location). The accuracy, interpolation performance are discussed in relation to absolute error associated with visual performance.

• 대한수학회논문집
• /
• 제16권3호
• /
• pp.459-485
• /
• 2001

The aim of EIT (electrical impedance tomography) system is to image cross-section conductivity distribution of a human body by means of both generating and sensing electrodes attached on to the surface of the body, where currents are injected and voltages are measured. EIT has been suffered from the severe ill-posedness which is caused by the inherent low sensitivity of boundary measurements to any changes of internal tissue conductivity values. With a limited set of current-to-voltage data, figuring out full structure of the conductivity distribution could be extremely difficult at present time, so it could be worthwhile to extract some necessary partial information of the internal conductivity. We try to extract some key patterns of current-to-voltage data that furnish some core information on the conductivity distribution such s location and size. This overview provides our recent observation on the location search and the size estimation.

• Structural Monitoring and Maintenance
• /
• 제4권1호
• /
• pp.69-84
• /
• 2017

Delamination is the most common failure mode in layered composite materials. The author have found that the electrical potential change (EPC) technique using response surfaces method is very effective in assessment delamination in basalt fiber reinforced polymer (FRP) laminate composite pipe by using electrical capacitance sensor (ECS). In the present study, the effect of the electrodes number on the method is investigated using FEM analyses for delamination location/size detection by ANSYS and MATLAB, which are combined to simulate sensor characteristic. Three cases of electrodes number are analyzed here are eight, twelve and sixteen electrodes, afterwards, the delamination is introduced into between the three layers [$0^{\circ}/90^{\circ}/0^{\circ}$]s laminates pipe, split into eight, twelve and sixteen scenarios for cases of eight, twelve and sixteen electrodes respectively. Response surfaces are adopted as a tool for solving inverse problems to estimate delamination location/size from the measured EPC of all segments between electrodes. As a result, it was revealed that the estimation performances of delamination location/size depends on the electrodes number. For ECS, the high number of electrodes is required to obtain high estimation performances of delamination location/size. The illustrated results are in excellent agreement with solutions available in the literature, thus validating the accuracy and reliability of the proposed technique.

• 한국지리정보학회지
• /
• 제10권2호
• /
• pp.11-22
• /
• 2007

본 논문은 인구 중심점 개념을 이용하여 GIS 공간 모형에서 보다 정확한 수요 규모를 추정할 수 있는 방법을 제시하고자 하는 연구이다. 이를 위하여 본 연구에서는 면적 속성의 수요 데이터와 점형 속성의 인구 중심점(population centroid)의 개념을 활용하여 보다 정확한 수요 규모를 추정할 수 있는 방법을 제시하고 다양한 지역 및 공간 단위에도 적용될 수 있는 가능성을 제시하였다. 이를 위하여 기존의 수요 데이터 이용 방법의 한계와 제한점을 보완하고 보다 정확한 수요 규모의 추정을 위해서 주택 유형별 가중치 기반의 인구 중심점 추정 방법을 제시하였다. 추출된 인구 중심점을 기반으로 각 수요점의 위치와 수요 규모를 추정하고 인구 중심점과 수요 지점간의 거리 측정 방법을 통하여 실제 GIS 공간모형의 적용 가능성을 살펴 보았다. 이를 위하여 입지-배분 공간 모형을 사례로 시설물 입지를 위한 기본적인 수요 규모와 서비스 배분을 위한 GIS 공간 모형의 적용 가능성을 확인하였다.

• Journal of the Korean Statistical Society
• /
• 제31권2호
• /
• pp.261-276
• /
• 2002

Probability density or its derivatives may have a discontinuity/change point at an unknown location. We propose a method of estimating the location and the jump size of the discontinuity point based on kernel type density or density derivatives estimators with one-sided equivalent kernels. The rates of convergence of the proposed estimators are derived, and the finite-sample performances of the methods are illustrated by simulated examples.

• 한국통신학회논문지
• /
• 제23권8호
• /
• pp.2080-2089
• /
• 1998

The microcellular architectures based on the smaller size increase the possibilities of frequent handover, thereby necessitating additional control procedures for providing communication services. This paper proposes a technique for estimating the mobile location in the microcellular architecutre. It can be utilized for many purposes such as increasing the effectiveness of channel allocation strategies. Simulations are performed to analyze the estimation accuracy of the proposed technique.

• ETRI Journal
• /
• 제22권4호
• /
• pp.1-12
• /
• 2000

Designing a reliable multicast-based network that scales to the size of a multicast group member is difficult because of the diversity of user demands. The loss inferences of internal nodes by end-to-end measurements do not require the use of complete statistics because of the use of maximum likelihood estimation. These schemes are very efficient and the inferred value converges fast to its true value. In the theoretical analysis, internal delay estimation is possible but the analysis is very complex due to the continuity property of the delay. In this paper, we propose the use of a bottleneck location estimator. This can overcome the analytical difficulty of the delay estimation using the power spectrum of the packet interarrival time as the performance metric. Both theoretical analysis and simulation results show that the proposed scheme can be used for bottleneck location inference of internal links in scalable multicasting.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.112-121
• /
• 2016

ADAS(Advanced Driver Assistance Systems) and street furniture information collecting car like as MMS(Mobile Mapping System), they require object location estimation method for recognizing spatial information of object in road images. But, the case of conventional methods, these methods require additional hardware module for gathering spatial information of object and have high computational complexity. In this paper, for a coordinate of road sign in single camera image, a position estimation scheme of object in road images is proposed using the relationship between the pixel and object size in real world. In this scheme, coordinate value and direction are used to get coordinate value of a road sign in images after estimating the equation related on pixel and real size of road sign. By experiments with test video set, it is confirmed that proposed method has high accuracy for mapping estimated object coordinate into commercial map. Therefore, proposed method can be used for MMS in commercial region.

• Journal of the Korean Statistical Society
• /
• 제33권1호
• /
• pp.59-78
• /
• 2004

A regression function in generalized linear model may have a discontinuity/change point at unknown location. In order to estimate the location of the discontinuity point and its jump size, the strategy is to use a nonparametric approach based on one-sided kernel weighted local-likelihood functions. Weak convergences of the proposed estimators are established. The finite-sample performances of the proposed estimators with practical aspects are illustrated by simulated examples.