• 제목/요약/키워드: location Area Design

검색결과 563건 처리시간 0.03초

공동주택 건축계획요소에 따른 전기 에너지 소비특성 분석 - 서울지역의 40평형(132~165㎡)의 단위세대 전기에너지 사용량을 중심으로 - (Analysis on Electricity Consumption Characteristics of Apartments based on Architectural Planning Factors - foused on Households with a total area of 132~165㎡ in Seoul-)

  • 박소윤;이윤재;이현수
    • KIEAE Journal
    • /
    • 제11권5호
    • /
    • pp.107-117
    • /
    • 2011
  • This paper aims to analyze architectural planning factors that could contribute to reductions in electricity consumption in the household of apartments, to apply energy saving methods at the design phase. These six architectural planning factors were orientation, building type (flat, tower block), standard floor access type (corridor access type, stair case type, EV hall access type), household location (floor), household opening type (one side opening, right angle opening, two sides opening or three sides opening), and bay on the facade (one bay, two bays, three bays, four bays), and these were derived from literature review. Household electricity consumption data were gathered from 2168 households with a total area of 135~150$m^2$ of 6 apartment complexes over 1000 households in Seoul. The annual characteristics of electricity consumption according to architectural planning factors were analyzed. And, variances between groups with respect to the mean of summer, winter, and annual electricity consumption according to each architectural planning factors were analyzed using ANOVA and t-test. The results showed that an annual electric energy saving of over 1000kWh was facilitated by these planning factors. In addition, high energy efficiency architectural planning factors based on the analysis were as follows: southwest orientation, flat type, corridor access type and staircase type, household loation below the 20th floor, two sides opening and three sides opening, and 2 bays and 3 bays.

농어촌 보건소 신축과 보건소 진료량의 관련성 - IMF 경제위기의 혼란효과 검토 - (The relationship between the new-building of rural public health centers and outpatient medical utilization - review of confounding effect by IMF economic recession)

  • 박선희;이수진;소운기;나백주;이진용
    • 보건행정학회지
    • /
    • 제21권3호
    • /
    • pp.349-364
    • /
    • 2011
  • Objectives : The purpose of this study was to evaluate the relationship between new-building of rural public health centers and the outpatient medical utilization. Methods : The study subjects were 141 public health centers in rural area. The data were collected from 1995 to 2001, medical utilization and local population, healthcare resources, and economic characteristics were included. In order to evaluate new-building effects, we performed paired t-tests and multivariate regression analyses. Results : The following variables are significant affecting the medical utilization of rural public health centers: urban side location of public health centers(p<0.05), pre- and post-IMF economic crisis(p<0.001), number of medical aid recipients(p<0.01), number of private clinics(p<0.05), workers of public health centers(p<0.001), financial independent level of local governments(p<0.001). In contrast, the existence of new-building and number of the aged 65 and over were not significant variables. Conclusions : We could not find out the positive relationship between the existence of new-building and the volume of medical utilization in rural public health centers. In particular the medical utilization of rural public health centers is significantly affected by IMF economic recession and number of the poor strata, the economically depressed area.

유리화공정 고온영역에서의 방사성 배기체 유동해석 (Numerical Analysis of Off-Gas Flow in Hot Area of the Vitrification Plant)

  • 박승철;강원구;황태원
    • 방사성폐기물학회지
    • /
    • 제5권3호
    • /
    • pp.213-220
    • /
    • 2007
  • 유리화공정 고온영역에서의 방사성 배기체 유동해석을 해석하기 위하여 상용 수치해석 범용 툴인 FLUENT를 이용하여 적용성을 검토하여 보았다. 수치해석을 통하여 유리화공정 원형설비에 영향을 미치는 인자를 파악하였는데, 저온용응로, 배관냉각기 및 고온필터 등의 세 단계로 나누어 해석을 수행하였다. 저온용융로의 경우 폐기물 처리용량에 따른 해석과 저온용융로 내부 과잉산소 공급 비에 따른 연소지연 가능성에 대한 수치해석을 수행하였다. 배관냉각기의 경우에는 각종 수치 모델 및 외벽 열전달계수를 확보하였으며 또한 방사성 핵종의 거동을 모사할 수 있는 수치적 기업을 검토하였다. 이러한 방법론을 적용하여 핵종의 열교환기 내부에서의 응고 특성에 대하여 고찰하였다. 수평 유입형식의 인입관이 있는 일반적인 형상과 유입구가 필터 내부에 수직으로 있는 고온필터의 수치해석을 통하여 인입관의 위치에 따른 고온필터의 작동 특성을 비교하였다.

  • PDF

유리화공정 고온영역에서의 방사성 배기체 유동해석 (Numerical Analysis of Off-Gas Flow in Hot Area of the Vitrification Plant)

  • 박승철;김병렬;신상운;이진욱;강원구;홍석진
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2005년도 추계 학술대회 논문집
    • /
    • pp.69-78
    • /
    • 2005
  • 유리화공정 고온영역에서의 방사성 배기체 유동해석을 통하여 해석에 적합한 모델을 개발하였다. 개발된 모델을 이용한 수치해석을 통하며 유리화공정 원형설비에 영향을 미치는 인자를 파악하였는데, 저온용융로. 배관냉각기 및 고온필터 등의 세 단계로 나누어 해석을 수행하였다. 저온용융로의 경우 폐기물 처리용량에 따른 해석과 저온용융로 내부 과잉산소 공급 비에 따른 연소지연 가능성에 대한 수치해석을 수행하였다. 배관냉각기의 경우에는 각종 수치 모델 및 외벽 열전달계수를 확보하였으며 또한 방사성 핵종의 거동을 모사할 수 있는 수치적 모델을 개발하였다. 이러한 방법론을 적용하여 핵종의 열교환기 내부에서의 응고 특성에 대하여 고찰하였다. 수평 유입형식의 인입관이 있는 일반적인 형상과 유입구가 필터 내부에 수직으로 있는 고온필터의 수치해석을 통하여 인입관의 위치에 따른 고온필터의 작동 특성을 비교하였다.

  • PDF

감시 위치 기반의 UAV 모터프리미티브의 구조 설계 (Structure Design of Surveillance Location-Based UAV Motor Primitives)

  • 곽정훈;성연식
    • 정보처리학회논문지:소프트웨어 및 데이터공학
    • /
    • 제5권4호
    • /
    • pp.181-186
    • /
    • 2016
  • 무인항공기(Unmanned Aerial Vehicle, UAV)는 짧은 시간 동안 넓은 범위의 정찰이 가능하기 때문에 최근에는 이를 활용한 감시 시스템 연구가 주목을 받고 있다. 넓은 범위를 감시할 때 조종사가 반복적으로 UAV를 비행시키는 것은 운영에 필요한 비용 문제가 발생한다. 감시를 위한 비행경로를 사전에 정의할 수 있다면 이를 기반으로 UAV를 자율 비행시켜 비용 문제를 해결할 수 있다. 전통적인 접근 방법은 GPS를 기반으로 비행할 경로를 다수 개의 모터프리미티브로 정의한다. 하지만, UAV가 감시할 지점이 모터프리미티브에 반영되지 않아 감시가 제대로 수행되지 못하는 문제가 발생한다. 이 논문에서는 감시용 UAV를 자율 비행시키기 위한 모터프리미티브의 구조를 제안한다. 모터프리미티브는 감시 대상을 정확히 기술하기 위해서 자동으로 감시할 지점을 선택하여 생성된다.

원자력 및 핵의학 분야용 Total RMS (Radiation Monitoring System)의 설계 (Design of Total RMS(Radiation Monitoring System) for nuclear and nuclear medicine)

  • 고태영;이주현;이승호
    • 전기전자학회논문지
    • /
    • 제21권2호
    • /
    • pp.158-161
    • /
    • 2017
  • 본 논문에서는 원자력 및 핵의학 분야용 Total RMS(Radiation Monitoring System)를 제안한다. 제안하는 시스템은 Stack Monitor, Area Monitor, Water(Liquid) Monitor 등을 하나의 시스템으로 확장 및 제어할 수 있는 장비로 각 방사선 검출기에서 측정된 신호를 통합 모니터링 할 수 있다. 제안하는 시스템은 해당 방사선을 검출하는 Sensor Module, 방사선 검출 위치에 인접한 곳에서 방사선량을 디스플레이 하는 Display Unit, 검출된 방사선량이 위험 수준에 도달시 경보를 알리는 Alarm Unit, 각 모니터링에서 측정된 방사선량들을 취합하고 저장하여 원격 감시 시스템에 내용을 전달하는 Main Hub, 원격지에서 측정된 방사선량 상태를 일목요연하게 디스플레이 하는 RMS Monitoring Unit 등으로 구성된다. 제안된 원자력 및 핵의학 분야용 Total RMS의 성능을 평가하기 위하여 공인시험기관에서 실험한 결과, 측정 불확도가 8.5%이하로 측정되어 국제 표준인 ${\pm}15%$ 이하에서 정상동작 됨이 확인되었다.

Errors in Estimated Temporal Tracer Trends Due to Changes in the Historical Observation Network: A Case Study of Oxygen Trends in the Southern Ocean

  • Min, Dong-Ha;Keller, Klaus
    • Ocean and Polar Research
    • /
    • 제27권2호
    • /
    • pp.189-195
    • /
    • 2005
  • Several models predict large and potentially abrupt ocean circulation changes due to anthropogenic greenhouse-gas emissions. These circulation changes drive-in the models-considerable oceanic oxygen trend. A sound estimate of the observed oxygen trends can hence be a powerful tool to constrain predictions of future changes in oceanic deepwater formation, heat and carbon dioxide uptake. Estimating decadal scale oxygen trends is, however, a nontrivial task and previous studies have come to contradicting conclusions. One key potential problem is that changes in the historical observation network might introduce considerable errors. Here we estimate the likely magnitude of these errors for a subset of the available observations in the Southern Ocean. We test three common data analysis methods south of Australia and focus on the decadal-scale trends between the 1970's and the 1990's. Specifically, we estimate errors due to sparsely sampled observations using a known signal (the time invariant, temporally averaged, World Ocean Atlas 2001) as a negative control. The crossover analysis and the objective analysis methods are for less prone to spatial sampling location biases than the area averaging method. Subject to numerous caveats, we find that errors due to sparse sampling for the area averaging method are on the order of several micro-moles $kg^{-1}$. for the crossover and the objective analysis method, these errors are much smaller. For the analyzed example, the biases due to changes in the spatial design of the historical observation network are relatively small compared to the tends predicted by many model simulations. This raises the possibility to use historic oxygen trends to constrain model simulations, even in sparsely sampled ocean basins.

도시림의 보호 및 증진관리를 위한 계획제도에 관한 연구 - 대전광역시를 사례로 - (Planning System on Conservation and Improvement of Urban Forest - A Case Study in Daejon City, Korea -)

  • 정순오
    • 농촌계획
    • /
    • 제15권4호
    • /
    • pp.135-146
    • /
    • 2009
  • Urban forest area in South Korea has been increased up to 20.8% of national land as of 2007 by the mergence of municipalities and counties. The rate of park and green tract among urban forest averages out to about 4% nationally but the Capital, Seoul, almost 105% level, not easy to split the two. Park and green has positive management system because of its infrastructure attribute and relevant security obligation standard while urban forest left alone with no such concerns. The most important reason of the negligence comes from institutional inertia although it is possible to be managed functionally by forest laws as like forests of park, landscape, wind and noise protection, and timber product. As a results, it reaches below than 92.64% of the national average level of the timber stockpile especially in the metropolitan areas and loses broad acres rapidly due to the easy conversion system to the urban land usage. Therefore, there must be required some alternative methodologies to conserve and foster it. The paper proposes the four urban forest management types and their control methods. The four types divide into conservation, foster, development, and reservation ones. Also it suggests the five furtherance tract types with the combination among the four earlier types, optionally having one of the six aim climaxes and recommends the standardization of operation design. The total green quantity index of urban forest also suggested by the weight method according to location and DBH class. The case study of the suggested model was executed on the Daejon Metropolitan area and its index calculated as 110.4% level compared with the acreage.

선형에 따른 전심의 이동에 관한 연구 (A Study on Shifting of Pivoting Point in accordance with Configuration of Ships)

  • 최명식
    • 한국항해학회지
    • /
    • 제10권2호
    • /
    • pp.83-96
    • /
    • 1986
  • In the restricted sea way such as fair way in harbor, narrow channel etc, the safe ship-handling is a very important problem, which is greatly related with turning ability of ships. It is of great importance that ship-handlers can grasp the position of pivoting point varying with time increase at any moment for relevant steering activities. Mean while, in advanced ship-building countries they study and investigated pivoting point related with turning characteristics, hut their main interest lies in ship design, not in safe ship controlling and maneuvering. In this regards it is the purpose of this paper to provide ship-handlers better under standing of pivoting point location together with turning characteristics and then to help them in safe ship-handling by presenting fact that pivoting points vary according to configuration of ships. The author calculated the variation of pivoting point as per time increase for various type of vessels, based on the hydrodynamic derivatives obtained at test of Davidson Laboratory of Stevens Institutes of Technology , New Jersey, U.S.A. The results were classified and investigated according to the magnitude of block coefficient , length-beam ratio, length-draft ratio, rudder area ratio ete, and undermentioned results were obtained. (1) The trajectory of pivoting point due to variation of rudder angle are all the same at any time, though the magenitude of turning circle are changed variously. (2) The moving of pivoting point is affected by the magnitude of block coefficient, length-beam ratio, length-draft ratio, however the effect by rudder area ratio might be disregarded. (3) In controlling and maneuvering of vessels in harbor, ship-handlers might regard that the pivoting point would be placed on 0.2~0.3L forward from center of gravity at initial stage. (4) The pivoting point of VLCC or container feeder vessels which have block coefficient more than 0.8 and length-beam ratio less than 6.5 are located on or over bow in the steady turning. (5) When a vessel intends to avoid some floating obstruction such as buoy forward around her eourse, the ship-handler might consider that the pivoting point would be close by bow in ballast condition and cloase by center of gravity in full-loaded condition.

  • PDF

지방근막 역전 피판을 이용한 발과 발목의 재건 (Adipofacial Turn-Over Flap for Reconstruction of the Foot and Ankle)

  • 이원재;양은정;탁관철;정윤구
    • Archives of Plastic Surgery
    • /
    • 제34권4호
    • /
    • pp.441-447
    • /
    • 2007
  • Purpose: Various kinds of local flap or free flap have been used for coverage for soft tissue defects with bone exposure over the ankle and dorsum of foot. Adipofascial flaps, nourished by vascular plexuses of the subcutaneous tissue and deep fascia originating from the local perforators of the major vessels, appear particularly to be indicated for the reconstruction of these areas. Our experience with this flap on the dorsum of foot and ankle has also been quite encouraging. Methods: The design of the flap is determined by the size and the location of the defect. The base of the flap is chosen depending on the availability of the soft tissue around the defect. The ratio of the area of the flap to the area of the base wound be more reliable to predict the survival of the turnover flap by the conventional length-to-width ratio. Nineteen patients with defect over the dorsum of the foot and ankle were resurfaced with adipofascial turn-over flaps and skin graft. Results: The average age of the patients was 38.2 years(3 - 81 years). The flap size was from $2{\times}3cm$ to $8{\times}5cm$. The average follow-up time was 6 months. All flaps survived completely except one case who suffered distal necrosis of the flap. The additional skin graft was required for partial skin loss in the five cases. Other functional impairment was not noted. Conclusion: Dissection of the local adipofascial turnover flap is quite easy, quick, requires less time and sacrifice of surrounding muscle itself, and maintains major arteries. In most cases, donor-site morbidity is minimal with an acceptable scar, and both functional and esthetical results were satisfactory. Therefore, Adipofascial flap could be an option for the difficult wounds around the foot and ankle.