• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.165-168
• /
• 2000

An active-matrix LCD using thin film transistors (TFT) has been widely recognized as having potential for high-quality color fiat-panel displays. Pixel-Design Array Simulation Tool (PDAST) was used to profoundly understand the gate signal distortion and pixel charging capability, which are the most critical limiting factors for high-quality TFT-LCDs. In addition, PDAST can estimate voltage distributions in common electrode which can affect pixel voltage and feed-through voltage. Since PDAST can simulate the gate, data and the pixel voltages of a certain pixel on TFT array at any time and at any location on an array, the effect of common electrode voltage can be effectively analyzed. The information obtained from this study could be utilized to design the larger area and finer image quality panel.

• Journal of the Korean housing association
• /
• v.24 no.4
• /
• pp.61-73
• /
• 2013

The purpose of this study is to provide information needed to the construction of the co-housing in the urban area. This study focused on the characteristics of co-housing in its planning process of private house & common space; 'economy', 'creativity' & 'sociality'. The object of this study is co-housing in 'Seongmi-san Village' in Seoul, which was built by a coordination company with residents' participation. The methods are investigating interview materials, floor plans of 9 households, & common space plans produced in the coordination process from the basic plan of private house & common space to the final plan. The results are as follows. 1) The size and plan of private house differed from each other. The water pipe location differed from each floor, so that there were difficulties in construction. In conclusion, these made no 'economy', but brought high 'creativity'. 2) The 'sociality' would be estimated as high because there were various types of resident participation; resident interviews on the planning, workshops for private housing plan, and workshops for common space.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2009.09a
• /
• pp.93-96
• /
• 2009

Foundation structure for the main engine heavy spare parts in the engine room is susceptible to resonance problem due to outfitting weight. In addition the deck floor has a large opening for the main engine installation and maintenance, which further weakens the foundation structure. To reinforce the weak structure, two types of approaches have been used; 1) insert an H-pillar below or above the floor and 2) increase the stiffener size. In this paper, the H-pillar approach is used to solve the vibration problem of the foundation structure in the engine room opening area. A commercial program is used to analyze the vibration problem ad to find the location and the size of the H-pillar. Modal test at the quay and on-board vibration measurement during the sea trial have confirmed the validity of inserting an H-pillar below the floor.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.4
• /
• pp.42-47
• /
• 2011

In this paper, wake equalizing duct (WED) form optimization was carried out using computational fluid dynamics (CFD) techniques. A WED is a ring-shaped flow vane with a foil-type cross-section fitted to a hull in front of the upper propeller area. The main advantage of a WED is the power savings resulting from the uniformity of the velocity distribution on the propeller plane, a reduction in the flow separation at the aft-body, and lift generation with a forward force component on the foil section. This paper intends to evaluate these functions and find an optimized WED form for minimizing the viscous resistance and equalizing the wake distribution. In the optimization process, the study uses four WED parameters: the angle of the section, longitudinal location, and angles of the axes for the half rings against the longitudinal and transverse planes of the ship. KRISO 300K VLCC2 (KVLCC2) is chosen as an example ship to demonstrate the WED optimization. The optimization procedure uses genetic algorithms (GAs), a gradient-based optimizer for the refinement of the solution, and Non-dominated Sorting GA-II(NSGA-II) for Multiobjective Optimization. The results show that the optimized WED can reduce the viscous resistance at the expense of the uniformity of the wake distribution.

• Korean Institute of Interior Design Journal
• /
• no.25
• /
• pp.221-228
• /
• 2000

These days, we face of the flood of books published, and data day by day. But there are some trouble to serve the knowlodge and date to the users efficently with a single library. Thats why we think about the way of the cooporation and the connection in modern library for the method of widening the service. As the result of the issue, the establishment for the relation of each library is needed to be done, and the composition of the public library network in same area and limit are also needed. Establishing the library network, the civil life will be much influenced by the service of a library. With the existing ways, library cant arrange data efficently by them selves, and the users are limited. But the library network collect the data with alloting the work to each portion, so it can be possible to gather the specipic data, and the cost caused by needless and overlapped data can be decreased remarkably. Furthermore, the location of the library can be closer than the existing one due to the less cost to maintain the library. As I explained, the convenience of using the library can make an effect on more people to use a library than before.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.11
• /
• pp.1525-1533
• /
• 2003

In the precision hot plate for wafer processing, uniform temperature of the upper plate is one of key factors affecting the quality of wafers. The state-of-the-art precision hot plates require temperature Variations less than $\pm$0.4$^{\circ}C$ during heating to 15$0^{\circ}C$, Which is difficult to be obtained only by the improvement of manufacturing techniques alone. In this study, computer aided heat transfer analysis was carried out to obtain the temperature distribution of the currently used reference hot plate for 200mm wafer. The analysis on the reference model assuming constant heat generation rate and uniform heating area showed total variation of 0.926$^{\circ}C$ at 15$0^{\circ}C$. One of the new design approaches based on the change of heating location together with different heat generation rate resulted in total variation of 0.297$^{\circ}C$ which is a 68% improvement compared to that of the reference model.

• Korean Institute of Interior Design Journal
• /
• v.17 no.6
• /
• pp.178-187
• /
• 2008

This study aims to analyze general features and forms of spatial structure of major space in museums and for the scope of this study, set up major space and the surrounding areas structured around major space and for the target of analysis, selected 10 museums of overseas examples from 19th century to 2006. And this study on focus, on the circulation structure and visual structure will be analyzed in qualitative method by focusing on the floor plan and section structures; deepening process of analysis, visual structure will turn into numerical value to analyze the spatial structure of the major space. The results of this study are as follow. First, vertical elements should be critically considered in a circulation plan for functional performance of dimensional circulation distribution in a major space. Second, a plan by location of vertical and horizontal moving elements related to a major space affects a circulation relation more than a connection type between a major space and an exhibition area. Third, it could be categorized into 4 types by considering the features of spatial structure followed by connecting relationship between areas. Fourth, comparable figures were drawn out among large space and surrounding areas but it couldn't draw out types.

• Korean Journal of Human Ecology
• /
• v.16 no.1
• /
• pp.123-135
• /
• 2007

The purpose of this study was to investigate the clothing behaviors and wearing sensation of ready-to-wear of the elderly woman who residing in the Pusan and Kimhae. The subjects were elderly woman who assessed the wearing sensation of slacks, jacket 1(1-2button), jacket 2(over 4button), and jumper. The results were as follows: 1. In the analysis of the clothing behaviors factors, the factor 1 was the concern about the appearance, the factor 2 was mental dependency about the clothes, the factor 3 was the satisfaction about the clothes and the factor 4 was the concern about the fashion. 2. As for the wearing sensation of the slacks, waist and thigh of the slacks was large and slacks length and crotch length was long. As for the wearing sensation of the jacket 1, over the age of 70 years was more satisfied than under the age of 70 for the wearing sensation of bust, waist, hip, and sleeve length. As for the wearing sensation of the jacket 2, under the age of 70 years was more satisfied than over the age of 70 for the wearing sensation of sleeve length and location of the armhole. As for the wearing sensation of the jumper, the area showed significant difference in waist. Jumper was larger than jacket.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.10 no.3
• /
• pp.1-8
• /
• 2011

Ministry of Education, Science And Technology, from 2009 to 2014, try to establish the setting of Department System in the Middle Schools and High Schools. They selected 45 Schools in 2009 and 61 Schools in 2010 for the Advanced Department System. I studied 2 High schools in 2009 and 3 High schools in 2010 of them, which located in GyeongGi-Do. I studied the Location of Department Classrooms, Teachers' Labs, Homebases and Resting Spaces of them. The conclusions are follows. 1) Most of them take Horizontal Zoning System in the Department Classrooms. 2) The Number of Teachers' Labs were increased in most of floors. On the other hand, most of Labs' Area were decreased. Every department Classroom Zone has one Teachers' Lab. 3) Every schools took much more spaces of Homebases and Resting Spaces than before. And various Resting Spaces using Corridors and Outdoors are prepared for students, those who moves every changing class time by the Department System.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.3
• /
• pp.282-290
• /
• 2013

A new method is presented that uses guided wave techniques for sludge and blockages detection in long-range pipelines. Existing techniques have the limitations that the sludge position needs to be known a priori and the area to be inspected needs to be accessible. Two guided wave techniques have been developed which allow the sludge or blockages to be detected remotely without the need to access the specific location where the pipe is blocked, nor to open the pipe. The first technique measures the reflection of guided waves by sludge which can be used to accurately locate the blocked region; the second technique detects sludge by revealing the changes to the transmitted guided waves propagating in the blocked region or after it. The two techniques complement each other and their combination leads to a reliable sludge or blockage detection. Various types of realistic sludge have been considered in the study and the practical capabilities of the two techniques have been demonstrated.