• The Journal of Korean Academy of Prosthodontics
• /
• v.23 no.1
• /
• pp.137-144
• /
• 1985

This study was designed to investigate the side shift of orbiting condylar movement by direct measurements from tracings of Denar pantograph. It is well known that side shift has much influence on the articulating surface of teeth. In this study, after locating the ture hinge axis point with Denar hinge axis locatior, the recordings of Mandibular movement were obtained from Denar pantographic recording assembly, and immediate side shift and progressive side shift were measured. For this study, 20 dental studnts who have no missing teeth and no difficulties of mandibular movement and 4 patients who were, treated by occlusal therapy were selected. The results obtained were as follows, 1. The prevalence of immediate side shift was 42%, and the immediate side shift of greater than 0.5mm was only 17%. 2. The mean of immediate side shift (20 of 48) was 0.38mm, that of right lateral excursion (7 of 24) was 0.27mm, and that of left lateral excursion (13 of 24) was 0.44mm. 3. The mean of progressive side shift was $7.21^{\circ}$ that of right lateral excursion was $6.46^{\circ}$, and that of left lateral excursion was $7.96^{\circ}$.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.2
• /
• pp.113-123
• /
• 2001

The success of complete denture prosthesis is to satisfy three basic requirements for the edentulous patient : maximum comfort, efficiency, and esthetic appearance. This can be achieved only if the dentures are both stable and retentive. When the residual alveolar ridge has resorbed significantly, stability and retention are more dependent on the correct position of the teeth and external surfaces of the denture. The stability and retention of the denture can be improved by locating the denture in the neutral zone and reproducing exact mandibular border movement for balanced occlusion. The neutral zone philosophy is based upon the concept that there exists a specific area where the musculature function will not unseat the denture in the mouth. In here, forces generated by the tongue are neutralized by the forces generated by the lips and cheeks. One of the simplest methods for recording border movements in three dimensions is to make stereographic record of condylar movement. Stereographs are made in the mouth during mandibular movement with intraoral clutches and central bearing point, and used in dictating the condylar movement on the articulator later by generating the condylar paths in doughy acrylic resin. Its procedure is simpler and more convenient than that of Pantograph. In this clinical report, we introduce the concept of neutral zone and stereograph in complete denture fabrication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2221-2229
• /
• 1998

Handoff is an important parameter for system performance and capacity analysis in CDMA cell planning. In this paper, simulation tool for analyzing the effects of soft handoff on cell planning of CDMA network is developed by studying propagation model in 1.9GHz frequency specrum, soft hadnoff algorithm given by IS-95, and several parameters for CDMA cell planning. By using the tool, soft handoff gain and effects of soft handoff on cDMA system performance and capacity are analyzed. Research results and simulation tool developed in this paper can be used for optimal CDMA cell planning for PCS and IMT-2000 in 1.9GHz frequency spectrum such as locating base station and parameter optimization.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.7
• /
• pp.63-74
• /
• 2017

Recently in the area of ICT, the M2M and IoT are in the spotlight as a cutting edge technology with the help of advancement of internet. Among those fields, the smart home is the closest area to our daily lives. Smart home has the purpose to lead a user more convenient living in the house with WLAN (Wireless Local Area Network) or other short-range communication environments using automated appliances. With an arrival of the age of IoT, this can be described as one axis of a variety of applications as for the M2H (Machine to Home) field in M2M. In this paper, we propose a novel technique for estimating the location of a terminal that freely move within a specified area using the RSSI (Received Signal Strength Indication) in the WLAN environment. In order to perform the location estimation, the Fingerprint and KNN methods are utilized and the LMS with the gradient descent method and the proposed algorithm are also used through the error correction functions for locating the real-time position of a moving user who is keeping a smart terminal. From the estimated location, the nearest fixed devices which are general electric appliances were supposed to work appropriately for self-operating of virtual smart home. Through the experiments, connection and operation success rate, and the performance results are analyzed, presenting the verification results.

• Korean Journal of Human Ecology
• /
• v.5 no.1
• /
• pp.28-41
• /
• 2002

This study investigated the effects of the high school students' self-efficacy, sex, and division of school upon their clothing fashionability and conspicuous consumption to understand a part of their clothing behaviors during adolescent period. Questionnaires were distributed to and collected from 575 male and female high school students attending academic and vocational high schools locating in Kwangju, Korea, from October 9 to October 14, 2000. The data were analyzed using descriptive statistics, factor analysis, MANOVA, and t-test. The results were as follows: 1. The main effects of the self-efficacy on the fashion interests and fashion knowledge were significant(p<.05, p<.01, respectively). 2. The main effects of the sex of respondents on the fashion interests and fashion knowledge were significant(p<.01, both). 3. The main effect of the self-efficacy on conspicuous consumption to demonstrate the economic status was significant (p<. 01). 4. The main effects of the sex of respondents on conspicuous consumption to high priced brand oriented was significant (p<. 01).

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.1
• /
• pp.18-30
• /
• 1999

A heat transfer analysis for the two-dimensional (2-D) steady state using finite difference method (FDM) is performed to predict the thermal behavior of the primary first-wall (FW) system of fusion reactor under various geometric and thermo-hydraulic conditions, such as the beryllium (Be) armor thickness, pitch of cooling tube, and coolant velocity. The FW consists of authentic steel (type 316 stainless steel solution annealed) for cooling tubes, Cu for cooling tubes embedding material, and Be for a protective armor, based on the International Thermonuclear Experiment Reactor (ITER) report. The present 2-D analysis, the control volume discretized with hybrid grid (rectangular grid and polar grid) and Gauss-Seidel iteration method are adapted to solve the governing equations. In the present study, geometric and thermo-hydraulic parameters are optimized with consideration of several limitations. Consequently, it is suggested that the adequate pitch of cooling tube is 22-32mm, the beryllium armor thickness is 10-12mm, and that the coolant velocity is 4.5m/s-6m/s for $100^{\circ}C$ of inlet coolant temperature. The cooling tube should locate near beryllium armor. But, it would be better for locating the center of Cu wall, considering problems of material and manufacturing. Also, 2-D analysis neglecting the axial temperature distribution of cooling tube is appropriate, regarding the discretization error in axial direction.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.6
• /
• pp.529-534
• /
• 2013

Objective: This study determines which of two types of 2D menu is better on iPhone. Background: Menu systems have been important components in modern graphical user interfaces. Review of menu design studies for human-computer interaction suggests that menu design guidelines for smartphones need to be reappraised. Method: A nested factorial design was used. Twenty-four participants were divided into two groups. The subjects were nested within the menu type. Two types of menus are an overview menu and a text menu. Two different breadth levels are 16 and 64. The participants performed five tasks in each breadth level. A task is defined as locating a product or product class on the deepest level of the hierarchy. An Apple iPhone 2G was used. Results: The results for ANOVA indicated a lack of a significant difference for time to respond between the two types of 2D menus. The overview menu showed the better satisfaction score between the two menu types. Conclusion: Even though the differences were not significant, an overview menu tended to show better performance and preference scores than a text menu that required scrolling. Application: This study can provide menu design guidelines when 2D menus are considered for small displays in a high breadth level.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.205-210
• /
• 2017

Wireless sensor networks are useful to various unmanned monitoring application such as monitoring environments, surveillance system, unmanned space exploration, and so on. Due to the inappropriate placement of sensor nodes, there are some problems, for example, low connectivity and high overlapped sensing area. These problems can make it difficult for the data collection and lead to a waste of energy. In this paper, we propose a node relocating method to resolve the inappropriate placement of sensor nodes. Given monitoring area, we place sensor nodes randomly and find redundant nodes and move them to uncovered area. Through the simulation, We show that the proposed method is viable and efficient compared with the existing randomly locating method.

• Journal of architectural history
• /
• v.13 no.4 s.40
• /
• pp.107-124
• /
• 2004

The purpose of this study is to understand underlying principle to form the U-type folk house in the northwestern part of Kangwha Island by viewpoint of inner residents. It is found that many factors other than climate are coincidentally affecting the shape of house; Resident's fixed thought like following geomancer' suggestion, seeking fortune, and locating house enclosed low site; Economic reason of uniting one house with two buildings and making small type by used timber from dismantled house; Centralizing life with small courtyard by reason of family type change from extended to nuclear; Influence from L or ㅁ type of upper class building at Seoul area. The method is thick description of culture with ethnographic method from cognitive anthropology: Observing the form and restoring residents' life with open-ended deep interview.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.8
• /
• pp.137-147
• /
• 1994

In this paper,we propose a knowledge-based system for locating Destination Address Block(DAB) by analyzing the structure of Korean envelope images. In the proposed system the preprocessing steps such as adaptive binarization connected component extraction and deskewing are carried out first for the effective structure analysis of the envelope image. Then DAB containing address name and zipcode parts of the input envelope image is extracted by an iterative procedure based on the knowledge acquired from the statistical feature analysis of the various envelope images. Most of the system for slocating address blocks on envelopes have extracted DAB by segmenting an envelope image into several candidate blocks followed by selecting one among the candidate blocks. Because it is very difficult to segment a Korean envelope image into several blocks due to the specific writing habits that the addresses on the envelope are written in close proximity to each other the proposed iterative procedure determines DAB by splitting or merging the connected components and verifies the determined DAB without segmentation and selection. Experiments with a great number of the live envelopes provided from Seoul Mail Center in Koorea were carried out. The results reveal that the proposed system is very effective for address block location on Korean envelopes.