• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.453-460
• /
• 2005

Since late 1970s, water quality monitoring had been performed in Korea by various agencies according to their own needs and objectives. Lacking of consistency in principles, such diverse operation has been producing difficulties in management of information on water quality parameters. These difficulties resulted from the fact that the expansion of monitoring networks had been based not on systematic methodology with considerations on scientifically established planning objectives but on personal experiences and subjective judgments in locating monitoring stations. This study aimed, therefore, to develop a selection methodology for locating monitoring stations to provide various informations on water quality to satisfy various monitoring objectives such as understanding short and long term trends of water quality, monitoring violations to water quality standards, identifying external causes and sources affecting water quality changes, supporting utilization of water resources, examining short-term variations in water quality through a concentrated investigation, estimating pollution loads from each unit watershed, supporting water quality modeling, and establishing informative systems for water resources management. Also, we applied the proposed methodology and presented an improved expansion plan for water quality monitoring networks in the Han River.

• Geophysics and Geophysical Exploration
• /
• v.18 no.2
• /
• pp.64-73
• /
• 2015

Recently, hydraulic fracturing is used in various fields and microseismic monitoring is one of the best methods for judging where hydraulic fractures exist and how they are developing. When locating microseismic events using single vertical well data, distances from the vertical array and depths from the surface are generally decided using time differences between compressional (P) wave and shear (S) wave arrivals and azimuths are calculated using P wave hodogram analysis. However, in field data, it is sometimes hard to acquire P wave data which has smaller amplitude than S wave because microseismic data often have very low signal to noise (S/N) ratio. To overcome this problem, in this study, we developed a grid search algorithm which can find event location using all combinations of arrival times recorded at receivers. In addition, we introduced and analyzed the method which calculates azimuths using S wave. The tests of synthetic data show the inversion method using all combinations of arrival times and receivers can locate events without considering the origin time even using only single phase. In addition, the method can locate events with higher accuracy and has lower sensitivity on first arrival picking errors than conventional method. The method which calculates azimuths using S wave can provide reliable results when the dip between event and receiver is relatively small. However, this method shows the limitation when dip is greater than about $20^{\circ}$ in our model test.

• Korean Journal of Acupuncture
• /
• v.25 no.4
• /
• pp.31-47
• /
• 2008

Objectives : The objective of this study is to apply the contents of "WaHyul(訛穴 : The errors of acupoint locations"of "ChimGuKyungHumBang" to modern acupoint locations. Methods : The text of "WaHyul" was closely examined and analyzed. "WHO standard acupuncture point locations in the western pacific region" was reviewed based on its contents. Results : According to the analysis, the correct 少商(LU11) was mentioned as a spot appropriately distanced from the corner of the nail root under the skin. This is the most accurate and reasonable synthesis of other related texts. Furthermore, the necessity of defining the locations of all the well points was also emphasized and their locations were mentioned that could be located by the same method. There is no further discussion of other acupoints apart from descriptions of their locations from other texts. Some parts that were pointed out as common errors included not only commonly made mistakes, but errors made in acupuncture texts as were true for 神門(HT7) and 肩井(GB21). The standards of 少商(LU11), 合谷(LI4) and 足三里(ST36) presented in the WHO Standardization are not only similar to what 「WaHyul」 indicated as errors in acupoint locations, but also deviate other acupuncture texts; appropriate corrections must be made. The standard of 肩井(GB21) presents a new acupoint locating method never mentioned before in received classic acupuncture texts and so a rediscussion is in need. Other standards, such as the 絶骨(GB39), had some points of controversy, yet somewhat incomplete while HT7 did not go beyond the bounds of "WaHyul". Conclusions : "WaHyul" can be used to revise WHO standards, and has practical value in modern acupoint locating.

• Management & Information Systems Review
• /
• v.38 no.2
• /
• pp.225-240
• /
• 2019

It has been known that health industry clusters promote economy of a nation in a macro view and make growth and development of individual firm. As a result, Korean health industry has been grown to play a role of making a high value added in Kwangkyo, Daedeok, Wonju, and Songdo. Using 156 firms locating in health industry clusters such as Kwangkyo, Daedeok, Wonju, and Songdo in increasing value added, this study investigated the structural relationships among R&D resources, R&D collaboration, policy support, and operational performance. All hypotheses, except a hypothesis for the effect R&D resources on operational performance, are reported to be statistically significant. In other words, the positive effect of R&D resources on policy support is reported. And policy support and R&D collaboration positively affect operational performance, and also the positive effect of policy support on R&D collaboration is reported. From the empirical results, we can know that policy support and R&D collaboration are the crucial factors to promote operational performance of the firms locating in Korean health industry clusters. It is important that this study has been investigated with the firms of health industry developing economy of a nation.

• Journal of Mechanical Science and Technology
• /
• v.16 no.7
• /
• pp.927-934
• /
• 2002

The HANARO ( High-flux Advanced Neutron Application Reactor) has been operated since 1995. The Cold Neutron (CN) hole was implanted in the reflector tank from the design stage. Before a vacuum chamber and a moderator cell for the cold neutron source are installed into the CN hole, it is necessary to measure exactly the size of the inside diameter and thickness of the CN hole to prevent the interference problem. Due to inaccessibility and high radiation field in the CN hole, a mechanical measurement method is not permitted. The immersed ultrasonic technique is considered as the best way to measure the thickness and the diameter of the CN hole. The 4-Axis manipulator was designed and fabricated for locating the ultrasonic sensors. The transducer of an ultrasonic sensor having 10 MHz frequency leads to high resolution as much as 0.03mm. The inside diameter and thickness of 550 points of the CN hole were measured using 2 channel ultrasonic sensors. The results show that the thickness and inside diameter of the CN hole is in the range of 3.3∼6.7mm and 156∼ 165mm, respectively. This data will be a good reference for the design of the cold neutron source facility.

• IEIE Transactions on Smart Processing and Computing
• /
• v.1 no.3
• /
• pp.125-132
• /
• 2012

This paper proposes an automatic object segmentation and background composition method for video communication over consumer mobile phones. The object regions were extracted based on the motion and color variance of the first two frames. To combine the motion and variance information, the Euclidean distance between the motion boundary pixel and the neighboring color variance edge pixels was calculated, and the nearest edge pixel was labeled to the object boundary. The labeling results were refined using the morphology for a more accurate and natural-looking boundary. The grow-cut segmentation algorithm begins in the expanded label map, where the inner and outer boundary belongs to the foreground and background, respectively. The segmented object region and a new background image stored a priori in the mobile phone was then composed. In the background composition process, the background motion was measured using the optical-flow, and the final result was synthesized by accurately locating the object region according to the motion information. This study can be considered an extended, improved version of the existing background composition algorithm by considering motion information in a video. The proposed segmentation algorithm reduces the computational complexity significantly by choosing the minimum resolution at each segmentation step. The experimental results showed that the proposed algorithm can generate a fast, accurate and natural-looking background composition.

• Journal of the Korean Society of Food Culture
• /
• v.30 no.2
• /
• pp.190-196
• /
• 2015

Restaurants implement menu labeling to provide nutritional information to customers in an attempt to help customers select healthy menu items. Considering the increase in food-away-from-home consumption, the purpose of this study was to identify motivators and barriers in restaurant customers regarding use of menu labeling. Data were collected from a survey on restaurant customers in Seoul, Korea. The findings of this study indicate that customers used menu labeling for health reasons. However, barriers to using menu labeling were identified as small font size, difficulty in locating nutritional information display, and difficulty in interpreting nutritional information. In addition, they also suggested expanding the scope of menu labeling for restaurants by including chain restaurants with less than 100 units. The findings of this study offer strategies for the government to improve menu labeling practices for customers.

• Journal of Navigation and Port Research
• /
• v.30 no.9
• /
• pp.741-748
• /
• 2006

Number of researches on efficient terminal operation system applying RFID(Radio Frequency Identification) are in progress. However, RFID has limitations on tracking and providing accurate positions of containers. In this paper, to enhance the performance of the integrated terminal operation system, an efficient loading management of yard is proposed by applying RFID based RTLS(Real Time Locating System) that provides real time accurate positions of containers. It was found that a group based sequence system is more efficient than the existing individual sequence number system in the container yard In the group based sequence system, the containers in the same group should have similar characteristics such as port of destination(POD), size, weight, etc. In order to run this system, we proposed the parameters to the unspecified N bytes of RFID tag which are specified in ISO 18000 7. And then, we developed an integrated operation system of container terminal using RFID. The proposed system reduces the ship turnaround time in ubiquitous port environments.

• Geophysics and Geophysical Exploration
• /
• v.7 no.4
• /
• pp.217-224
• /
• 2004

Self-potential and electrical resistivity methods were conducted for locating the auriferous mineralized zone, called Jija Vein, of Sambo mine, Limsu-ri, Haeje-myeon, Muahn-gun, Jeollanam-do. The host rocks of the mineralization include gneiss, rhyolite and felsic dyke. Ore vein is mainly fissured-filling type and sulfide minerals, such as pyrite, are disseminated in country rock. By the electrical responses from SP and surface resistivity methods., the mineralized zone is supposed to extend about 360 m directed N5W with the width of 20 m to 30 m. From resistivity tomograms using inclined borehole to surface, the ore body shape is interpreted as the width of 20 m in depth 40 m to 50 m.

• Journal of Surface Science and Engineering
• /
• v.42 no.5
• /
• pp.208-215
• /
• 2009

We employed atmospheric plasma to reactively remove the lubricant sprayed onto such industrial electronic parts as LCD chassis during sheet-metal forming processes and investigated basically the effect of plasma parameters on cleansing the surfaces of zinc-electroplated steel plates (EGI). Specimen prepared with some controlled amount of lubricant sprayed on their surfaces beforehand were subjected to two different kinds of atmospheric plasma, one being generated by using air and the other generated by using nitrogen (99.9% purity). Locating the plasma beams at the height range between 3.5 and 13.5 mm from the surface of each specimen and radiating for 5 to 30 seconds resulted out that the cases with a position of 3.5 mm and a duration of 5 seconds or longer showed the surfaces completely cleansed without a trace of lubricant. Furthermore we found out that the plasma generated by using simple air depicted higher cleansing ability than the other one generated by using expensive nitrogen, interestingly useful very much for industrial purposes. On another aspect, we confirmed that the drilled or cut surfaces of Zn-plated steel substrate would not be oxidized even under the influence of plasma during its cleansing process. Therefore, we could probably conclude from this fore-survey that a dry process adopting atmospheric plasma for cleansing industrial parts might be determined to become successful in terms of commercialization, cautiously.