• Journal of the Korean Solar Energy Society
• /
• v.25 no.2
• /
• pp.71-79
• /
• 2005

In this study, the ventilation performance of mechanical ventilation system in apartment House was analyzed through model test according to characteristics of air-vent. Then adequate interval of air-vent was suggested using computer simulation which will create comfort environment through improvement of ventilation performance in apartment house. The result of experiment with separation plate to prevent mixture of contaminated exhaust air with fresh supply air, the ventilation efficiency improved about 10%. The result of simulation with horizontal location of exterior air-vent, contaminated exhaust air is mixed regardless of interval variation. Consequently, mixture of the exhaust air can be prevented through locating the supply air vent on the top side and exhaust air vent on the lower side.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.04a
• /
• pp.309-316
• /
• 1998

In this paper, a newly derived formulation of a crack detection model is presented and its feasibility to detect cracks in structures is verified experimentally. To meet this objective, the followig approach is utilized. Firstly, the crack detection scheme which consists of the damage localization model and the crack detection model is formulated. Secondly, the feasibility and practicality of the complete procedure of the crack detection model is evaluated by locating and sizing cracks in clamped-clamped beams for which a f3w modal parameters were measured for sixteen uncracked and cracked states. Major results observed from the crack detection exercises include that far most damage cases, the predicted crack locations falls within very close to the inflicted locations of cracks in the test beam and the size of crack values estimated at the predicted locations are very close to the inflicted magnitudes.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2001.05a
• /
• pp.318-324
• /
• 2001

In this paper we propose the adaptive scheme to place more search points as long as the operation tapability of the motion estimator in the video codec permits. And the proposed algorithm takes advantage of the intuitive fact that the quality of the decoded video is more degraded as the spatial frequency of the corresponding block is increased due to the augmentation of local minima per unit area. Thererore, we propose the scheme to enhance the quality by locating relatively more search points in the block with high frequency components by analyzing the spatial frequencies of the video sequence. As a result, the proposed scheme can adaptively place more search points possibly permitted by the motion estimator and guarantees better quality compared to the TSS and FS.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10b
• /
• pp.144-146
• /
• 1998

GIS(Geographical Information System)의 네트워크는 실세계의 도로망, 전기망, 상하수도관 등을 표현한다.[4] 우리는 네트워크 분석 기능 중 자원 할당과 입지설정과 관련된 기능들의 Gothic 시스템에서 구현하였다. 자원 할당 문제는 네트워크 상에 자원을 공급하는 공급지와 자원이 이동하는 경로, 그리고 자원의 수요지가 존재할 때, 공급지의 자원 공급 능력과, 자원의 이동 비용, 그리고 자원의 수요량과의 연관관계를 고려하여 자원이 할당되는 지역을 설정해 주는 문제이다. 입지 설정 문제는 자원을 공급하는 서비스 센터의 위치를 결정해 준다. 센터의 위치는 인구로 대표되는 소비자의 분포와 이동 비용에 의해 결정된다. 입지 설정은 어떤 지점의 인구 밀집도를 분석해 주는 포텐셜(potential) 함수[3]와, 소비자들의 이동을 최소화시킬 수 있는 센터의 위치를 설정해 주는 두 기능으로 구성된다. 센터의 위치를 설정해 주는 문제는 높은 계산 량을 요구하므로, 본 시스템에서는 네트워크 클러스터링을 이용하여 연산의 양을 줄이는 Approximation 기법을 사용하였다.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2006.02a
• /
• pp.125-126
• /
• 2006

NimbleGen has developed strategies to use its high-density oligonucleotide microarray platform (385,000 probes per array) to map both promoter binding sites and copy number variation at very high-resolution in the human genome. Here we describe a genome-wide map of active promoters determined by experimentally locating the sites of transcription imitation complex binding throughout the human genome using microarrays combined with chromatin immunoprecipitation. This map defines 10,567 active promoters corresponding to 6,763 known genes and at least 1,196 un-annotated transcriptional units. Microarray-based comparative genomic hybridisation (CGH) is animportant research tool for investigating chromosomal aberrations frequently associated with complex diseases such as cancer, neuropsychiatric disorders, and congenital developmental disorders. NimbleGen array CGH is an ultra-high resolution (0.5-50 Kb) oligo array platform that can be used to detect amplifications and deletions and map the associated breakpoints on the whole-genome level or with custom fine-tiling arrays. For whole-genome array CGH, probes are tiled through genic and intergenic regions with a median probe spacing of 6 Kb, which provides a comprehensive, unbiased analysis of the genome.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.5 no.4
• /
• pp.347-352
• /
• 2005

PD(Partial discharges) are small electrical sparks that occur within the electric insulation of cables, transformers and windings on motors. PD analysis is a proactive diagnostic approach that uses PD measurements to evaluate the integrity of this equipment. Recently, several diagnostic algorithms for classifying the type of PD and locating the defect position have been developed. In this work, a new PD recognition system is proposed, which utilizes approximate coefficients of wavelet transform as a feature vector, furthermore, introduces bank of Elman networks to recognize the various PD phenomena. In order to verify the performance of the proposed scheme, it is applied to the simulated PD data.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.8
• /
• pp.27-36
• /
• 1997

In this paper, we propose a locating strategy using a cache based on the distributed call processing stucture. In our stategy, each originating call server, withc is responsible for call setup, has a cache to memorize the service ratio of call server which serves the called terminal.We present performance comparison of the proposed strategy with the existing strategy via simulation. We can reduce the cost for call setup because the originating call server can simpley establish a call without tracing the location of the called terminal. The proposed strategy also reduceds network loads caused by signaling at call setup time and lessens the frequency of queries for the database systems which can be a bottleneck when it serves many subscriber.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.1 no.4
• /
• pp.1-8
• /
• 2004

The optimum design parameters of several hydraulic systems are obtained using the complex method that is one kind of constrained direct search method. First, the parameters of lead-lag controller of the direct drive servovalve is designed using the complex method to satisfy the steady-state error requirement. Second, the optimum locating point of hydraulic cylinder Is determined to minimize the cylinder force in the operation range of rotational sluice gate. For the third application case, the optimum piston area of hydraulic cylinder is determined to minimize the man power to elevate the manually operated sluice gate.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.4
• /
• pp.36-41
• /
• 2014

Most faults that occur on transmission lines are caused by extreme weather with lightning storms in the distance. These are not only prolongs the time of removing and recovering, but also increases economical damages. If faults can be precisely located, maintenance crews can reach them quickly, and remove the faults in time. So, the precise locating of the faulted point on a transmission line is very important to improve the system reliability, and decreases economic damages as an inherent consequence of long term outages. Also, fault location methods are becoming of much importance for utilities and research. In this paper, two single-terminal impedance-based fault location techniques will be investigated to show the reliability and evaluated the performance of reactance and Takagi method by using MATHCAD program simulations.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.40-46
• /
• 2010

To protect press operator from the after-reach hazard, current Ministry of Labor Notification(MOLN) requires the use of a formula for calculating the safe distance away from the point of operation for locating press protective devices, Two Hand Control Devices(THCD) and Active Opto-Electronic Protective Devices(AOPD), on a power press. This formula is based on a same hand speed constant of 160cm/s. While EN standards use different hand speed constant for THCD and AOPD respectively. The objective of this study is to compare two guidelines on the hand speed constant published by MOLN and EN 692, also to propose a proper hand speed constant and validate it experimentally. As a experimental result, it could be known that hand speed constant of Ministry of Labor Notification should be improved as that of EN standards.