• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.131-136
• /
• 2016

PURPOSE. The aim of this study was to observe stress concentration in the implant, the surrounding bone, and other components under the pull-out force during the crown removal. MATERIALS AND METHODS. Two 3-dimensional models of implant-supported conventional metal ceramic crowns were digitally constructed. One model was designed as a vertically placed implant ($3.7mm{\times}10mm$) with a straight abutment, and the other model was designed as a 30-degree inclined implant ($3.7mm{\times}10mm$) with an angled abutment. A pull-out force of 40 N was applied to the crown. The stress values were calculated within the dental implant, the abutment, the abutment screw, and the surrounding bone. RESULTS. The highest stress concentration was observed at the coronal portion of the straight implant (9.29 MPa). The stress concentrations at the cortical bone were lower than at the implants, and maximum stress concentration in bone structure was 1.73 MPa. At the abutment screws, the stress concentration levels were similiar (3.09 MPa and 3.44 MPa), but the localizations were different. The stress at the angled abutment was higher than the stress at the straight abutment. CONCLUSION. The pull-out force, applied during a crown removal, did not show an evident effect in bone structure. The higher stress concentrations were mostly observed at the implant and the abutment collar. In addition, the abutment screw, which is the weakest part of an implant system, also showed stress concentrations. Implant angulation affected the stress concentration levels and localizations. CLINICAL IMPLICATIONS. These results will help clinicians understand the mechanical behavior of cement-retained implant-supported crowns during crown retrieval.

• Development and Reproduction
• /
• v.24 no.3
• /
• pp.177-185
• /
• 2020

Although many aquaporin (AQP) transcripts have been demonstrated to express in the female reproductive tract, the defined localizations and functions of AQP subtype proteins remain unclear. In this study, we investigated the expression of AQP1, AQP3, AQP5, AQP6, and AQP9 proteins in female reproductive tract of mouse and characterized their precise localizations at the cellular and subcellular levels. Immunofluorescence analyses for AQP1, AQP3, AQP6, and AQP9 showed that these proteins were abundantly expressed in female reproductive tract and that intense immunoreactivities were observed in mucosa epithelial cells with a subtype-specific pattern. The most abundant aquaporin in both vagina and uterine cervix was AQP3. Each of AQP1, AQP3, AQP6, and AQP9 exhibited its distinct distribution in stratified squamous or columnar epithelial cells. AQP9 expression was predominant in oviduct and ovary. AQP1, AQP3, AQP6, and AQP9 proteins were mostly seen in apical membrane of ciliated epithelial cells of the oviduct as well as in both granulosa and theca cells of ovarian follicles. Most of AQP subtypes were also expressed in surface epithelial cells and glandular cells of endometrium in the uterus, but their expression levels were relatively lower than those observed in the vagina, uterine cervix, oviduct and ovary. This is the first study to investigate the expression and localization of 5 AQP subtype proteins simultaneously in female reproductive tract of mouse. Our results suggest that AQP subtypes work together to transport water and glycerol efficiently across the mucosa epithelia for lubrication, proliferation, energy metabolism and pH regulation in female reproductive tract.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1E
• /
• pp.31-37
• /
• 2001

Matched Field Processing (MFP) is a successive process of correcting mismatches between true and assumed parameters by matching the measured acoustic field data with numerically simulated data which we call replica. The MFP is widely used both in geo-acoustic parameter inversions and in source localizations. Whether a certain parameter can be inverted effectively or whether a source can be localized correctly depends on the amount of the influence that a parameter has on the acoustic field during the matching process. Sensitive parameters can be better estimated than the less sensitive ones in MFP. On the contrary, the sensitive parameters affect adversely on the source localization results when they have uncertainties. In this paper, a sensitivity index is defined based upon the field variation resulting from the perturbed parameters. Numerical test results show that the index behaves in accordance with the results of source localization under a mismatched environment and also with the inversion solutions.

• Journal of Hydrogen and New Energy
• /
• v.25 no.6
• /
• pp.602-608
• /
• 2014

The sequence of bond overlap population of metal hydrogen binding is in Al-H > Fe-H > Zr-H > V-H. This results shows the binding energy of Al-H is the biggest in this metals (Al, Fe, Zr, and V) and hydrogen interaction. The Vanadium-hydrogen binding shows the weakest binding energy compared to other metals and it causes easy hydrogen desorption from the corresponding metals. The net charge of Al-H show the biggest value of 0.2248 and the severe localizations of electrons around aluminum and imply strongest covalent binding nature in these metals. This study is applicable to the purification of hydrogen in other bulk gas.

• Smart Structures and Systems
• /
• v.17 no.5
• /
• pp.795-817
• /
• 2016

A non-contact, in-situ and non-invasive technique for health monitoring of submerged fiber reinforced polymers (FRP) laminates has been developed using ultrasonic guided waves. A pair of mobile transducers at specific angles of incidence to the submerged FRP specimen was used to excite Lamb wave modes. Lamb wave modes were used for comprehensive inspection of various types of manufacturing defects like air gaps and missing epoxy, introduced during manufacturing of FRP using Vacuum Assisted Resin Infusion Molding (VARIM). Further service induced damages like notches and surface defects were also studied and evaluated using guided waves. Quantitative evaluation of transmitted ultrasonic signal in defect ridden FRPs $vis-{\grave{a}}-vis$ healthy signal has been used to relate the extent of damage in FRPs. The developed technique has the potential to develop into a quick, real time health monitoring tool for judging the service worthiness of FRPs.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.5
• /
• pp.477-482
• /
• 2011

There are accumulating evidences suggesting that connexin (Cx), a gap junction channel-forming protein, acts as a growth suppressor in various cancer cells, and this effect is attributeed to the gap junction-mediated intercellular communication (GJIC). In order to characterize the relationship between the growth-arresting activity of Cx26 and its cytoplasmic localizations after expression, we linked a nuclear export signal (NES) sequence to Cx26 cDNA before transfecting into a rat breast cancer cell line. A confocal fluorescent microscopic observation revealed that the insertion of NES minimized the nuclear expression of Cx26, and increased its cytoplasmic expression, including plasma membrane junctions. Total cell counting and BrdUrd-labeling experiments showed that the growth of the breast cancer cells was inhibited by 74% upon transfection of Cx26-NES, whereas only 9% inhibition was observed with only Cx26 cDNA.

• Journal of Plant Biology
• /
• v.32 no.4
• /
• pp.285-292
• /
• 1989

The intracellular localizations of polyamines and their related enzymes were investigated from young spinach leaves. Polyamines were present in all parts of plant cells, both in the subcellular organelles and in the soluble fraction of cytoplasm, however, polyamines were mainly located in the cytosolic fraction. Most activities of L-arginine decarboxylase(ADC) and L-ornithine decarboxylase(ODC), two important enzymes of putrescine and polyamine biosynthesis, were detected in cytosol fraction, while in subcellular organelles the activities were very low. Activities of diamine oxidase(DAO) and polyamine oxidase(PAO), the catabolic enzyme of diamine and polyamine, were not detected in spinach leaves. It was suggested that polyamines and their related synthetic enzymes were located in the soluble fraction of cytoplasm.

• Computers and Concrete
• /
• v.1 no.4
• /
• pp.433-455
• /
• 2004

The paper presents results of FE-calculations on shear localizations in quasi-brittle materials during both an uniaxial plane strain compression and uniaxial plane strain extension. An elasto-plastic model with a linear Drucker-Prager type criterion using isotropic hardening and softening and non-associated flow rule was used. A non-local extension was applied in a softening regime to capture realistically shear localization and to obtain a well-posed boundary value problem. A characteristic length was incorporated via a weighting function. Attention was focused on the effect of mesh size, mesh alignment, non-local parameter and imperfections on the thickness and inclination of shear localization. Different methods to calculate plastic strain rates were carefully discussed.

• Smart Structures and Systems
• /
• v.9 no.1
• /
• pp.21-33
• /
• 2012

In this study, a Lamb-wave based damage detection approach is proposed for damage localization in plate. A sensor network consisting of three PZT wafer type actuators/sensors is used to generate and detect Lamb waves. To minimize the complication resulted from the multimode and dispersive characteristics of Lamb waves, the fundamental symmetric Lamb mode, $S_0$ is selectively generated through designing the excitation frequency of the narrowband input signal. A damage localization algorithm based upon the configuration of the PZT sensor network is developed. Time-frequency analysis method is applied to purify the raw signal and extract damage features. Experimental result obtained from aluminum plate verified the proposed damage localization approach.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.6
• /
• pp.478-485
• /
• 2004

Vibration localization characteristics of mistuned repeated structures are investigated. The mistuning often creates significant response discrepancies among subcomponents of a repeated structure. As the result of the discrepancies, critical fatigue often occurs in a repeated structure. Therefore, it is of great importance to predict the vibration response of the mistuned repeated structures accurately. In this paper, a simplified model is employed and dimensionless parameters that influence the localization characteristics are identified. Through parameter study, two localization phenomena are investigated and compared.