• Journal of The Korean Society of Agricultural Engineers
• /
• 제60권2호
• /
• pp.75-84
• /
• 2018

Thermal stress of livestock has been issued due to recent climate change trends and this causes reproductive disorders, decreased feed consumption, immunosuppression, and increased mortality of animals. Concept of THI has been widely used to quantitatively evaluate the degree of thermal stress for animals, however use of this concept is restricted for animals living in the enclosed facilities such as mechanically ventilated broiler houses. In this study, time-based internal energy flow and variation trends of temperature and humidity were analyzed based on BES technique. Local weather data, insulation characteristics of building materials, heat and moisture generation rate from broilers according to age, algorithm of ventilation operation were adopted for boundary condition of the model to accurately compute THI values inside the mechanically ventilated broiler house. From the BES computation, excess frequency of THI threshold in Jeju city was highest on the assumption that air conditioning equipments were not installed. When general raising density ($39kg\;m^{-2}$) was adopted, total 2,191 hours were exceeded. Excess hours of THI threshold were strongly related to the cumulative air temperature ($R^2=0.87$).

• Journal of Advanced Navigation Technology
• /
• 제6권1호
• /
• pp.37-43
• /
• 2002

This paper describes the performance evaluation and analysis of Wireless Local Area Network (W-LAN) in the 5 GHz ISM-band in compliance with IEEE 802.11a. At present, most W-LAN products are based on 2.4 GHz band, but low speed (11Mbps) has the limitation to serve systems demanding high-speed data transmission. To solve this problem, it is necessary to design next generation W-LAN system with 54Mbps in the 5GHz. It is sure that implementation of next generation W-LAN will bring competitive advantages. In particular, it will support telecommunications for high-speed mobile environments as well as for fixed places such as a school zone, a lecture room, a hospital and other premises. A few simulation methods are applied to more accurate and reliable performance analysis of next generation W-LAN. To verify if continuous data service is supported for a high-speed mobile notebook, multi-path fading channels between wireless Access Point (AP) and wireless Network Interface Card (NIC) are modeled. In addition, low interference is analyzed via convolutional codes and Orthogonal Frequency-Division Multiplexing (OFDM). Also, to obtain reliable Bit Error Rate (BER), a single tap Least Mean Square (LMS) equalizer is applied. Given the above simulation, next generation W-LAN is an ideal solution for continuous data transmission in high-speed mobile environments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제15권6호
• /
• pp.3950-3960
• /
• 2014

In this study, the drag forces on a submerged square cylinder were analyzed using a three dimensional hydrodynamic model. The numerical results were compared with the experimental results to check the reliability of the numerical simulations, and the characteristics of the drag forces with the relative depths were analyzed by analyzing the pressure acting on the cylinder surface, which are normally difficult to measure experimentally. The numerical results showed that the drag forces acting on a submerged square cylinder originate mainly from the pressure forces, and component of the shear forces decreased with increasing relative depth. The pressure coefficient distributions showed that in the case of a low relative depth, a relatively high pressure was formed in the front of a cylinder, and a relatively low pressure was formed in the rear, which gives a high drag coefficient. In a high relative depth, the pressure in the front decreased and pressure in the rear increased, which is a similar phenomenon to that normally observed in two dimensional square cylinder flow. The effect of the static pressure was analyzed and the surface elevation difference between the front and rear zone of a cylinder has a limited effect on the drag forces. Finally, the numerical results showed that the drag forces acting on a submerged square are dominated by the dynamic pressure formed by three dimensional flow and the distribution of local surface elevation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제18권1호
• /
• pp.545-552
• /
• 2017

Ground subsidence can result in the formation of sinkholes, potholes, settlement of structures, and road subsidence. Road subsidence is described as the sudden collapse of the road surface into subsurface cavities caused by the loss of bearing capacity in the ground, such as the dissolution of limestone by fluid flow in the surface causing the formation of voids leading to subsidence at the surface. Road subsidence occurs about 665 times annually, and this incidence has been increasing until 2013. Damaged underground facilities, management negligence, and lowering of the ground water table have been the causes of road subsidence in Seoul. Seoul metropolitan government announced special management counter plans to relieve the anxieties and make the roads safe for passing. Construction sites, such as excavation works, need to be managed properly because they have strong potential to induce road subsidence. The aim of this study was to identify the main causes of road subsidence and suggest management plans. First, life cycle cost analysis revealed the daytime construction to be more appropriate than nighttime. In addition, by analyzing the limitations of using sand as a backfill material, it is proposed to use a flowable backfill material instead of sand. Finally, to reduce the blind spots, which is a problem in surveying the road pavement conditions of local governments, the road to be managed is divided into several zones, and a specialized agency is selected for each zone and a method of surveying the blind spots through collaboration is suggested.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제15권5호
• /
• pp.12-19
• /
• 2016

An average of 20 million individual transit unit activities per day on the Seoul-Gyeonggi-Incheon public transportation network are provided as transportation card analysis data by the metropolitan district (99.02% by 2014 standard, Humanlive, 2015.4). The metropolitan transportation card data can be employed in a comprehensive analysis of public transportation users' current transit patterns and by means of this, an effective use plan can be explored. In enhancing the existing information on the bus and rail integrated network of the metropolis with public transportation card data, the constraints in the existing methodology of metropolitan transit analysis, which functions on a zone unit origin and destination basis, can be overcome. Framework for metropolitan public transportation card data based integrated public transportation analysis, which consists of bus and rail integrated transport modes, is constructed, and through this, a single passenger's transit behavior transit volume can be approximated. This research proposes that in the use of metropolitan public transportation card data, integrated public transportation usage, as a part of individual passenger spatial movements, can be analyzed. Furthermore, metropolitan public transportation card usage data can provide insights into understanding not only movements of populations taking on transit activities, but also, characteristics of metropolitan local space.

• Korean journal of applied entomology
• /
• 제47권1호
• /
• pp.37-44
• /
• 2008

Oriental fruit moth, Grapholita molesta, is a serious pest on apples. To control this pest in an environmentally friendly method, mating disruption strategy using sex pheromone has been developed. Area-wide application of mating disruption has been needed to be effective, with little understanding on how much size of apple cultivating area should be treated in one time application of the mating disruption technique. On this matter, we needed to determine a minimal mating active zone of G. molesta that should be applied with mating disrupters to be effective. Molecular markers to discriminate a specific population should be developed to trace population migration for reproductive behaviors. Here we developed two effective molecular markers using random amplified polymorphic DNA (RAPD) technique. Different field populations of G. molesta, based on locations and seasons, were analyzed with these markers. In a specific location, G. molesta populations varied in genetic composition with different seasons. Different local populations showed differential variation according to their relative distances among apple orchards. In overall, genetic variation among different populations became lessen with progression of seasons.

• Tuberculosis and Respiratory Diseases
• /
• 제51권2호
• /
• pp.166-172
• /
• 2001

Silicone fluid is a biomaterial widely used in modern cosmetic procedures because there are few side effects, considerable chemical stability and predictable physical properties. However, many local and systemic adverse reactions have reported. In particular some serious pulmonary complications have been reported such as pulmonary thromboembolism, acute respiratory distress syndrome with some cases leading to mortality. Most of the serious complicated cases were induced by an illegal silicone fluid injection. We experienced two cases of acute respiratory distress syndrome with pulmonary hemorrhage induced by an illegal silicone fluid injection. The patients were 41 & 51 year old women, who complained of dyspnea. The chest X-ray and HRCT scan findings showed a bilateral ground glass attenuation on the bilateral dependent portion of the upper and middle lung zone. The patients clinical symptoms and the radiologic and other laboratory findings were compatible with acute respiratory distress syndrome induced by the silicon fluid injection. Here we report two cases of acute respiratory distress syndrome with pulmonary hemorrhage induced by an illegal silicone injection with a review of the relevant literature.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.88-91
• /
• 2002

The two dimensional size effect of specimen gauge section (length x width) was investigated on the compressive behavior of a T300/924 [45/-45/0/90]3s, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a 30$\times$30, 50$\times$50, 70$\times$70, and 90mm$\times$90mm gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• Economic and Environmental Geology
• /
• 제24권4호
• /
• pp.421-434
• /
• 1991

Ground magnetic surveys were conducted at four areas where the Yangsan fault, the most prominent lineament in the Kyeongsang basin, appears to be passed through. For data processing, IGRF correction, upward continuation and reduction-to-the-pole were performed. The automatic inversion by using a matrix computation method, which takes the depth to bottom layer of the horizontal two layer structure as the model parameter, has been attempted to delineate the subsurface structure. Upward continuation of the surface magnetic map to the same level of the aeromagnetic survey (KIER, 1989) resulted in very similiar patterns to those of aeromagnetic data. Subsurface modeling of eight profile data show that the strike and dip of the Yangsan fault in study areas are $N6^{\circ}-15^{\circ}E$, and near vertical to somewhat eastward, repectively, despite of the local lithological contrast of each study area. It seems that the magnetic effect of faulting in the study area 1, which locates in the most northern part of the survey areas, is disturbed by that of igneous intrusion. At study area 2, the possibility of volcanic or igneous intrusion, which is 200-300 meters wide along the fault plane was presented. At study area 3, unlike other study areas, distinct fracture zone of 500-700 meters in width was revealed along the surface fault line. The andesitic rocks of the study area 4 have very high susceptibilities and the fault line on surface of this area was shifted about 500 meter eastward, as compared with the inferred fault line by the previous study.

• Korean Journal of Ecology and Environment
• /
• 제53권2호
• /
• pp.173-184
• /
• 2020

Irrigation ponds, 'dumbeong', which are artificially constructed water resources for traditional farming, serve as a biological shelter connecting seasonally created rice paddy fields to local freshwater ecosystems. This 2018 study surveyed 143 irrigation ponds in the western Civilian Control Zone (CCZ) area from August to September, revealing species diversity and community characteristics of benthic macroinvertebrates. A total of 13,454 individuals of macroinvertebrates were captured and classified into 3 phyla, 5 classes, 17 orders, 59 families, 192 species. Among Insecta, the most frequently recorded order was Odonata, 55 spp.(33.7%), followed by Coleoptera, 52 spp. (31.9%), Hemiptera, 34 spp. (20.8%), Diptera, 17 spp. (9.8%), Ephemeroptera, 3 spp. (2.4%), Trichoptera, 1 spp. (0.6%) and Lepidoptera, 1 spp. (0.6%). Taxon of non-Insecta consisted of Mollusca, 14 spp. (48.2%), Annelida, 11 spp. (37.9%) and Arthropoda, 4 spp. (3.4%). The analysis of Diversity Index (H'), Species Richness Index (RI), Dominance Index (DI) and Evenness Index (J') revealed the general stability of communities in the study sites. A total of 28 rare species were found in 98 study sites, including three endangered species designated by the Ministry of Environment. These results showed that the species diversity and rarity of macroinvertebrates in the study area were greater than those of previous research on lentic wetlands (lake, etc.) and national conserved wetlands(Upo-swamp, etc.) in Korea. A conservation planning of aquatic ecosystems in the western CCZ area, therefore, should focus on conservation of irrigation ponds.