• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.330-333
• /
• 2006

사용자의 위치 기반 서비스는 유비쿼터스 컴퓨팅 환경에서 중요한 역할을 하고 있다. 위치 기반 서비스는 현재 사용자나 사물의 위치를 표시 해 주는 서비스이다. 이러한 위치 인식 기반 서비스는 GPS, ActiveBadge, Sensor 등과 같은 장비를 이용하여 위치를 인식 할 수 있다. 그러나 특허나 벤더에 따라 서로 다른 기술들을 사용하기 때문에 매우 노동 집약적이며 각 장비마다 가격이 고가이기 때문에 의미 있는 ROI를 이끌어 낼 수 없다. 비록 가격이 낮아져 의미 있는 ROI를 이끌어 내더라도 대부분의 위치 인식은 Zone-level정도의 정확도를 가지고 있다. 본 논문에서는 이러한 문제점을 해결하기 위해 최근 급속히 보급되고 있는 IEEE 802.11 Wireless LAN 인프라를 활용하여 AP의 RSSI 정보를 이용하여 위치 인식을 한다. 또한, Zone-level에서 room-level로 기존의 위치 인식보다 좀 더 정밀하게 하기 위하여 삼각측량 알고리즘을 이용하여 설계하였다.

• 한국연소학회:학술대회논문집
• /
• 1998.10a
• /
• pp.1-8
• /
• 1998

Waste combustion above a grate is the core process of incineration systems, stability of which should be guaranteed for emission minimization. However, complicated reactions and heat and mass transfer phenomena make understanding the process difficult. One dimensional bed combustor with a numerical combustion model is utilized to investigate the combustion process of the bed, using cubic wood particles as a simulated fuel. Bed combustion behavior is characterized with apparent flame propagation speed, which has close relationship with air supply rate and chemical and physical characteristics of the fuel. Base on the availability of oxygen, two distinct reaction zone is identified; the oxygen-limited and the reaction-limited zone leading to the extinction by excessive convection cooling. The numerical modeling shows good agreement with the experimental results. The transient bed combustion behavior of local temperature and oxygen consumption rate is adequately reproduced. The numerical model is extended to model the waste bed combustion of a commercial incineration plant, which shows meaningful results as well.

• Structural Engineering and Mechanics
• /
• v.55 no.1
• /
• pp.79-92
• /
• 2015

In this study, free vibration analyses of symmetric laminated cantilever and simply supported damaged composite beams are investigated by using finite element method (FEM). Free vibration responses of damaged beams are examined using Euler Bernoulli beam and classical lamination theories. A computer code is developed by using MATLAB software to determine the natural frequencies of a damaged beam. The local damage zone is assumed to be on the surface lamina of the beam by broken fibers after impact. The damaged zone is modeled as a unidirectional discontinuous lamina with $0^{\circ}$ orientations in this study. Fiber volume fraction ($v_f$), fiber aspect ratio ($L_f/d_f$), damage length ($L_D$) and its location (${\lambda}/L$), fiber orientation and stacking sequence parameters effects on natural frequencies are investigated. These parameters are affected the natural frequency values significantly.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.2
• /
• pp.209-218
• /
• 2017

Sea ice is the main factor affecting the safety of the Arctic engineering. However, traditional numerical methods derived from classical continuum mechanics have difficulties in resolving discontinuous problems like ice damage. In this paper, a non-local, meshfree numerical method called "peridynamics", which is based on integral form, was applied to simulate the interaction between level ice and a cylindrical, vertical, rigid structure at different velocities. Ice in the simulation was freshwater ice and simplified as elastic-brittle material with a linear elastic constitutive model and critical equivalent strain criterion for material failure in state-based peridynamics. The ice forces obtained from peridynamic simulation are in the same order as experimental data. Numerical visualization shows advantages of applying peridynamics on ice damage. To study the repetitive nature of ice force, damage zone lengths of crushing failure were computed and conclude that damage zone lengths are 0.15-0.2 times as ice thickness.

• 연구논문집
• /
• s.24
• /
• pp.81-96
• /
• 1994

To investigate failure mechanisms observed in carbon-phenolic thermal insulators, differential equations which govern the decomposition process in a deformable anisotropic porous solid are derived for three-dimensional axisymmetric constructions. The governing equations not only couple the material deformation with pore pressure, but also couple pressure and temperature, which means that heat convected by the pyrolysis gases is properly accounted for. Then the Bubnov-Galerkin finite element method is applied to these equations to transform them into a semidescrete finite element system. A thermal insulation liner in the cowl region under typical operating conditions is analyzed to find a mechanism for plylift. The results from the structural analysis show across-ply failure in the cowl zone. The mechanism for plylift is hypothesized as a sequential procedure : 1) the across-ply failure which is the precursor to plylift and 2) the local fiber buckling caused by generation of excessive in-plane compressive stress. To prevent plylift, the across-ply stress can be reduced by using appropriate material ply angles in cowl zone design.

• Progress in Superconductivity and Cryogenics
• /
• v.2 no.2
• /
• pp.1-5
• /
• 2000

There is the possibility that internal tin processed Nb$_3Sn$ wires are locally heated during the drawing process and the jacketing process. It is important to know the variations in J$_c$ of internal tin processed Nb$_3Sn$ wires caused by local heating. Internal tin processed Nb$_3Sn$ rods were cold worked to 2.28 mm, using the appropriate reduction ratio, and then cut into several pieces. At this stage, wires were locally 50 mm heat zone heated up to 360$^{\circ}C$. The locally heated Nb$_3Sn$ wires were drawn to a final diameter size of 0.81 mm. Others were cold worked successively to 0.81 mm and locally heated with the same conditions. 2 types of locally heat treated wires were wound on Ti-6Al-4V barrels and heat treated for the Nb$_3Sn$ reaction. Local heating of internal tin processed Nb$_3Sn$ wires after the J$_c$ of these wires. However, local heating at an intermediate stage of the drawing process caused a decrease in J$_c$. When the local heating temperatures were higher than melting point of Sn, non-Cu J$_c$'s decreased significantly. A Sn-Cu alloyed boundary appeared after local heating over the melting point of Sn, and caused work hardening and a decrease in the workability.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.3
• /
• pp.179-189
• /
• 2014

The Saemaeul Movement, which is the representative national campaign of Korea aimed at the development of local communities, has drawn a great deal of attention from home and abroad and formed an element of Korea's national brand since 2000. Accordingly, this research was conducted for the purpose of constructing a memorial park in Shindo Village, Cheongdo County, North Kyoungsang Province, which is a home to the Saemaeul Movement. As the Saemaeul Movement is benchmarked by many countries around the world today, this research aims to communicate the spirit and social value of the movement and disseminate its effects of local community development in rural areas through the construction of a memorial park. In this study, the design motive of the memorial park was conceived through the historical review and case studies of the Saemaeul Movement. In parallel, theoretical study was also conducted on design techniques as the basis of this research. In consideration of the characteristics of a technical article, this research was conducted in several phases. In the first phase, the conditions of the site where the park construction was planned were analyzed and the direction of its development was set. In the second phase, the main theme and the basic principles of planning were established, and the contents of the park construction project were devised in detail. In the last phase, a comprehensive plan was established, including a space layout to accommodate activities, facilities and programs to be introduced to the park. The park construction site ($106,000m^2$) was divided into four zones (memorial zone, historical theme park, education zone and experience zone) based on circulation planning aimed at creating memorial space, and was linked to eco-friendly ecological space in consideration of environmental features. At a time when the Saemaeul Movement is being propagated across the world, the result of this study will help create a place for its memorial and play a pivotal role to boost international movements aimed at promoting co-prosperity across the global village. It will also bear significance as an example of theme-based park construction in a rural area and the invigoration of a local community.

• Journal of the Korean Geographical Society
• /
• v.49 no.2
• /
• pp.113-138
• /
• 2014

Despite the growing numbers of regional problems (e.g. conflicts between the state and localities, inter-local conflicts, etc.) associated with the state-led developmental projects, the Korean social sciences have been unable to offer satisfying explanations and solutions to the regional problems. This is mainly because the existing works, which have been taken captured by the assumptions of "methodological nationalism", significantly lack the socio-spatial understandings of the state actions and the relations between the state and localities, thereby seeing the issues of regional development mainly in terms of either the economic efficiency defined at the national scale, or the plan rationality of the national bureaucrats. With this problem orientation in mind, this paper aims to explore the ways in which the state and localities are interacting, conflicting and negotiating with one another through the mediation of the state-led developmental projects. Focusing on the developmental processes of Masan Export Processing Zone from the mid-1960s to the early 1970s, it examines the multi-scalar processes through which the state-led industrial complex developmental processes have been influenced by the complex and dynamic interactions among social forces and actors acting at diverse geographical scales (e.g. the global, national, local, urban, etc.). This analysis shows that the regional policies of the Korean developmental state were more heavily influenced by the interactions, contestations, and collaborations among social forces and actors, acting in and through the state, at various geographical scales, rather than by the economic and techno-bureaucratic rationality.

• Korean Journal of Head & Neck Oncology
• /
• v.25 no.2
• /
• pp.128-131
• /
• 2009

Objectives : Mucosa-associated lymphoid tissue(MALT) lymphoma of the head and neck region is relatively rare, but it has variable clinical and biological characteristics. Although there were few studies on this topic, there is still controversy regarding the best treatment. The authors retrospectively investigated the clinical courses and treatment results in 10 patients presenting with MALT-lymphoma in head and neck region except ocular adnexa. Material and Methods : Ten patients with a histologically verified diagnosis of the extranodal marginal zone B cell lymphoma arising in thyroid glands(3), larynx(3), oral cavity(2), oropharynx(1), salivary glands(1) were analyzed. Results : Four patients were allocated to stage IE and another six patients to stage IIE according to the Ann Arbor staging system. Treatment consisted of local therapy(surgical resection and/or radiotherapy) in four patients and systemic chemotherapy with/without local therapy in six patients. Complete remission and partial remission were achieved in seven patients(70%) and two patients(20%), respectively. No recurrence or mortality was observed with a mean follow-up of 40.5 months. Conclusion : Patients with MALT-lymphomas of the head and neck region were potentially treated by local modality in localized disease state. However systemic chemotherapy was also effective even in localized disease state and was well tolerated by patients. And strict staging and close long-term monitoring were recommended considering its indolent progression.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.3
• /
• pp.79-84
• /
• 2013

The seawater pipes in the engine rooms of ships are surrounded by severely corrosive environments caused by fast flowing seawater containing chloride ions, high conductivity, etc. Therefore, it has been reported that seawater leakage often occurs at a seawater pipe because of local corrosion. In addition, the leakage area is usually welded using shielded metal arc welding with various electrodes. In this study, when seawater pipes were welded with four types of electrodes(E4311, E4301, E4313, and E4316), the difference between the corrosion resistance values in their welding zones was investigated using an electrochemical method. Although the corrosion potential of a weld metal zone welded with the E4316 electrode showed the lowest value compared to the other electrodes, its corrosion resistance exhibited the best value compared to the other electrodes. In addition, a heat affected zone welded with the E4316 electrode also appeared to have the best corrosion resistance among the electrodes. Furthermore, the corrosion resistance of the weld metal zone and heat affected zone exhibited relatively better properties than that of the base metal zone in all of the cases welded with the four types of electrodes. Furthermore, the hardness values of all the weld metal zones were higher than the base metal zone.