• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.131-138
• /
• 2008

Mobile Ad hoc NETworks (MANETs) refer to autonomous networks in which wireless data communications are established between multiple nodes in a given coverage area without a base station or centralized administration. Because of node mobility and limited battery life, the network topology may changes frequently. Selecting the most reliable path during route discovery process is important to improve performance in ad hoc networks. In this paper, an enhanced routing protocol based on AODV(Ad hoc On-demand Distance Vector routing) by monitoring variation of receiving signal strength is proposed. New metric function that consists of node mobility and hops of path is used for routing decision. For preventing route failure by node movement during data transmission, a new route maintenance named as LRC (Local Route Change) is presented. If the node movement is detected, the routing agent switches path to its neighbor node in LRC. Simulation results show that the performance of the proposed routing scheme is superior to previous AODY protocol.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1447-1453
• /
• 2014

Wireless Body Area Networks (WBAN), standardized as IEEE 802.15.6, enable digital devices on/around the human body to communicate with one another. WBAN is essentially a person's piconet consisting of a master (mobile) device and several slave devices, which follows his/her mobility pattern, and hence, occasionally collides with another piconet as people meet or pass by. As such, a mechanism to detect collision and avoid interference is needed for intra-piconet communications. In this paper, we focus on this notorious problem of piconet collision and propose Distributed Time Division Piconet Coexistence (DTDPC) using local time offset exchange as a simple, attractive solution. The proposed DTDPC provides different level of services for various applications. Besides our simulation results have shown that the proposed solution outperforms the conventional CSMA protocols.

• Convergence Security Journal
• /
• v.13 no.4
• /
• pp.11-17
• /
• 2013

All u-Health system has security vulnerabilities. This vulnerability locally(local) or network(network) is on the potential risk. Smart environment of health information technology, Ad-hoc networking, wireless communication environments, u-health are major factor to increase the security vulnerability. u-health care information systems user terminal domain interval, interval public network infrastructure, networking section, the intranet are divided into sections. Health information systems by separating domain specific reason to assess vulnerability vulnerability countermeasure for each domain are different. u-Healthcare System 5 layers of security risk assessment system for domain-specific security vulnerability diagnosis system designed to take the security measures are needed. If you use this proposed model that has been conducted so far vaguely USN-based health information network security vulnerabilities diagnostic measures can be done more systematically provide a model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1049-1056
• /
• 2016

In this paper, a design method for a compact dual-band slot antenna with bent slot is studied. Bent slots are added on the rectangular slot of the proposed antenna for dual-band operation. The rectangular slot is fed by a coaxial cable by placing a rectangular feeding patch inside the slot. When the bent slots are added onto the both corner of the upper side of the rectangular slot symmetrically, a new resonant frequency is created in low frequency because of the increasement of the slot length. A prototype of the proposed dual-band slot antenna operating at 2.45 GHz WLAN band and 4.50-8.30 GHz band including 5GHz WLAN band is fabricated on an FR4 substrate with a dimension of 30 mm by 30 mm. Experiment results show that the antenna has a desired impedance characteristic with a frequency band of 2.40-2.49 GHz and 4.33-9.85 GHz for an input reflection coefficient < -10 dB.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.1 s.12
• /
• pp.1-12
• /
• 2007

The objective of Bus Information System developed as a part of the ITS, provides the operation information of buses to passengers and managers. The system uses roadside antennas (reading electronic tags on board buses) to enable wireless communication each other and radio data communication to deliver information about buses and their locations. This information is used to estimate the arrival time of the bus which will be shown on the bus stop message board or via internet. Bus Information System or Bus Management System (BMS) is going ahead and set up in many local governments, and recently quality improvement of the BIS is considered as a very important element in expanding of business or management. Therefore this research wished to contribute rationalization of the system by maintaining optimum quality. An gang was chosen to apply overall quality control process and will be evaluated in terns of its propriety and performance. This study has led the improvement of service and promote the use of public transits, which is the best way to solve the city traffic problem by effective management of public transits.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1189-1196
• /
• 2015

In this paper, a microstrip-fed multiband monopole antenna for GPS(Global positioning system)/WiMAX(:Worldwide interoperability for microwave access)/WLAN(Wireless Local Area Networks) for applications was designed, fabricated and measured. The proposed antenna is based on a microstrip-fed structure, and composed of two rectangular double rings and L strips pair and then designed in order to get triple band characteristics. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS). The proposed antenna is made of $27.0{\times}54.0{\times}1.0mm3$ and is fabricated on the permittivity 4.4 FR-4 substrate. The experiment results shown that the proposed antenna obtained the -10 dB impedance bandwidth 300 MHz (1.325~1.625 GHz), 400 MHz (2.275~2.675 GHz), and 600 MHz (3.15~3.75 GHz) covering the GPS/WiMAX/WLAN bands. Also, the proposed antenna measured gain and radiation patterns characteristics for required operating bands.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.441-448
• /
• 2015

In this paper, a CPW-fed dual-band monopole antenna with two branch strips for WLAN(Wireless Local Area Networks) applications was designed, fabricated and measured. The proposed antenna is based on a CPW-feeding structure, and composed of two branch strips and then designed and tuned the length of two branch lines to obtained required frequencies bands. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and carried out simulation about parameters $L_5$, $L_8$, $W_3$, $W_5$, $W_9$. The proposed antenna is fabricated on the FR-4 substrate using the obtained parameters. The numerical and experiment results demonstrated that the proposed antenna obtained the -10 dB impedance bandwidth 1,095 MHz (1.57~2.665 GHz) for 2.4 GHz band and 1,680 MHz (4.99~6.67 GHz) for 5 GHz band satisfied requirement while simultaneously covering the WLAN bands. And characteristics of gain and radiation patterns are determined for WLAN operating bands.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.9
• /
• pp.841-848
• /
• 2016

In this paper, a microstrip-fed dual-band monopole antenna with DGS(: Defected Ground System) for WLAN(: Wireless Local Area Networks) applications was designed, fabricated and measured. The proposed antenna is based on a microstrip-fed structure, and composed of two strip lines and DGS structure and then designed in order to get dual band characteristics. We used the simulator, Ansoft's High Frequency Structure Simulator(: HFSS) and carried out simulation about parameters W2, L10, W3, and DGS to get the optimized parameters. The proposed antenna is made of $21.0{\times}36.0{\times}1.6mm3$ and is fabricated on the permittivity 4.4 FR-4 substrate. The experiment results are shown that the proposed antenna obtained the -10 dB impedance bandwidth 700 MHz(2.10~2.80 GHz) and 1,780 MHz(5.02~6.80 GHz) covering the WLAN bands. Also, the measured gain and radiation patterns characteristics of the proposed antenna are presented at required dual-band(2.4GHz band/5.0GHz band), respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.4
• /
• pp.417-424
• /
• 2014

In this paper, a dual-band circular ring monopole antenna with semi-circular strip for WLAN(Wireless Local Area Networks)/WiMAX(World interoperability for Microwave Access) applications. The proposed antenna is based on a planar monopole design, and composed of half circular strip for dual-band operation which cover WLAN and WiMAX frequency bands. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are obtained for WLAN/WiMAX frequency bands.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.12
• /
• pp.718-728
• /
• 2014

The multi-band wireless local area network (WLAN) using 60 GHz band and the lower band (typically 2.4 GHz/5 GHz band) can support the very high data rate in short-distance communication using 60 GHz band and the long-distance communication using the lower band. For heightening the efficiency of multi-band WLAN, an band selection scheme is a necessity. In this paper, we propose an effective frequency band selection scheme for multi-band WLANs. By using computer simulation with NS-3, we show the performance of the proposed schemes when the stations suffer from the human blockage and the log-normal shadowing.