• 한국대기환경학회지
• /
• 제20권3호
• /
• pp.345-360
• /
• 2004

The late sea-breeze and its impacts on ozone distributions were investigated during April to September from 1998 to 2002, in the Busan metropolitan area (including surrounding areas) using the surface ozone concentrations (obtained at 9 monitoring sites), local meteorological variables (obtained near the shore), together with synoptic data. The urban scale ozone concentration was also simulated using the MM5/UAM-V to better understand the role of late sea-breeze in Busan. The results from observation study showed that most of the late sea-breeze occurred when weak offshore synoptic flow (northwesterly) suppressed development of sea - breeze, and the ozone concentration level and frequencies exceeding ozone standard increased with the onset time of sea breeze. We also found that the late sea-breeze clearly induces relatively weak wind speed and high temperature during the daytime As a result it enhances the photochemical ozone accumulation and delays the occurrence time of the averaged maximum ozone concentrations. The results of simulation for high ozone episode (24 August, 2001) by MM5/UAM -V revealed that the late sea-breeze interacted with weak offshore synoptic wind can contribute significantly to high ozone concentration in the coastal urban area. The simulated horizontal and vertical distribution of ozone concentration indicated that ozone can be accumulated over the sea under stagnant condition and return to the land in the late afternoon with the sea breeze, suggesting both the relationship between late sea-breeze and recirculation and the importance of late sea -breeze effects influencing severe ozone pollution in Busan.

• 설비공학논문집
• /
• 제17권10호
• /
• pp.938-946
• /
• 2005

Shape optimization of internally finned circular tube has been peformed for periodically fully developed turbulent flow and heat transfer. The physical domain considered in this study is very complicated due to periodic boundary conditions both streamwise and circumferential directions. Therefore, Pareto frontier sets of a heat exchanger can be acquired by coupling the CFD and the multi-objective genetic algorithm, which is a global optimization technique. The optimal values of fin widths $(d_1,\;d_2)$ and fin height (H) are numerically obtained by minimizing the pressure loss and maximizing the heat transfer rate within ranges of $d_1=0.2\sim1.5\;mm,\;d_2=0.2\sun1.5\;mm,\;and\;H=0.2\sim1.5\;mm$. The optimal values of the design variables are acquired after the fifth generation and also compared to those of a local optimization algorithm for the same geometry and conditions.

• 한국지형학회지
• /
• 제26권2호
• /
• pp.15-27
• /
• 2019

This study tries to reveal transport mechanism and origin of components from fluvial terrace deposits in Danyang and Geum River basins, through grain size partitioning using the Weibull function. Grain size parameters suggest that the samples analyzed in this study can be grouped into the coarse, fine and medium samples. The coarse samples are partitioned into three or four components. More than 65% of the coarse samples consist of components by suspension and saltation by fluvial process, while components by attachment to coarse grains or aggregates and/or by individual grains deposited under non-flow condition are also found in the coarse samples. The fine samples consist of four components and components found in loess deposits in Korea occupy >70%, suggestive of the same transport mechanisms (westerlies and winter monsoon) and common source areas with loess deposits in Korea. However, components by aeolian process from local sources as well as by fluvial process are also found in the fine samples. The medium samples are partitioned into components with similar sizes to the coarse and fine samples, respectively.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권1호
• /
• pp.8-16
• /
• 2017

Most of small air vehicles with moving wing fly at low Reynolds number condition and the reduced frequency of the moving wing ranges from 0.0 to 1.0. The physical phenomena over the wing dramatically vary with the reduced frequency. This study examines experimentally the effect of the reduced frequency at low Reynolds number. The NACA0012 airfoil performs sinusoidal pitching motion with respect to the quarter chord with the four reduced frequencies of 0.1, 0.2, 0.4 and 0.76 at the Reynolds number $2.3{\times}10^4$. Smoke-wire flow visualization, unsteady surface pressure measurement, and unsteady force calculation are conducted. At the reduced frequency of 0.1 and 0.2, various boundary layer events such as reverse flow, discrete vortices, separation and reattachment change the amplitude and the rotation direction of the unsteady force hysteresis. However, the boundary layer events abruptly disappear at the reduced frequency of 0.4 and 0.76. Especially at the reduced frequency of 0.76, the local variation of the unsteady force with respect to the angle of attack completely vanishes. These results lead us to the conclusion that the unsteady aerodynamic characteristics of the reduced frequency of 0.2 and 0.4 are clearly distinguishable and the unsteady aerodynamic characteristics below the reduced frequency of 0.2 are governed by the boundary layer events.

• Corrosion Science and Technology
• /
• 제14권1호
• /
• pp.1-11
• /
• 2015

Local wall thinning and integrity degradation caused by several mechanisms, such as flow accelerated corrosion (FAC), cavitation, flashing and/or liquid drop impingements, are a main concern in carbon steel piping systems of nuclear power plant in terms of safety and operability. Thinned pipe management program (TPMP) had been developed and optimized to reduce the possibility of unplanned shutdown and/or power reduction due to pipe failure caused by wall thinning in the secondary side piping system. This program also consists of several technical elements such as prediction of wear rate for each component, prioritization of components for inspection, thickness measurement, calculation of actual wear and wear rate for each component. Decision making is associated with replacement or continuous service for thinned pipe components. Establishment of long-term strategy based on diagnosis of plant condition regarding overall wall thinning is also essential part of the program. Prediction models of wall thinning caused by FAC had been established for 24 operating nuclear plants. Long term strategies to manage the thinned pipe component were prepared and applied to each unit, which was reflecting plant specific design, operation, and inspection history, so that the structural integrity of piping system can be maintained. An alternative integrity assessment criterion and a computer program for thinned piping items were developed for the first time in the world, which was directly applicable to the secondary piping system of nuclear power plant. The thinned pipe management program is applied to all domestic nuclear power plants as a standard procedure form so that it contributes to preventing an accident caused by FAC.

• 대한전자공학회논문지
• /
• 제27권3호
• /
• pp.86-94
• /
• 1990

종합정보통신망(ISDN)의 패킷 교환망 구조를 지역망 설계 알고리즘과 분산망 설계 알고리듬을 적용하여 설계한다. 지역망 설계 알고리듬은 MST 토폴로지를 기본으로 하며, 한계용량을 만족시키고 통신량의 분산효과를 얻을 수 있도록 한다. 이를 Kruskal, Esau-Williams 알고리듬과 비교한 결과, 비용면에서 2.7%의 향상과 평균 지연시간에서 44.8%의 감소 효과를 보였다. 또한 분산망 설계 알고리듬으로서 MST 토폴로지에서 신뢰도를 증가시켜 나아가며 최소 비용의 토폴로지를 결정하는 알고리듬을 제안하였으며, Cut-Saturation 알고리듬과 종단간 지연시간과 통신량 제한조건 하에서 비교한 결과, 비용면에서 약 1/7의 감소 효과와 약 2.5배의 Throughput 증가 효과를 보였다.

• 한국환경과학회지
• /
• 제6권4호
• /
• pp.323-333
• /
• 1997

본 연구는 해양에서 비규칙적으로 관측된 유속자료를 이용 속도유선함수를 객관적해석을 통하여 산출하였다. 이를 위하여 헬름흘쯔(Helmholtz)정리를 응용 2차원 유속장의 비발산 부분만 나타내는 유선함수와 와도와의 관계를 규정하는 포이송(Poisson)방정식을 도출하고, 혼합경계조건과 관측치로부터 산출된 와도장을 이용 유선함수를 구하였다. 위의 방법을 실현하기 위하여 텍사스-루이지아나 대륙붕 순환 및 수송 연구(LATEX측 일환으로 텍사스-루이지아나 대륙붕의 31개 정점에서 32개월(1992년 4월 SIM 1994년 11월)간 관측된 해류계자료를 이용하였다. 본 방법으로 산출된 텍사스-루이지아나 대륙붕의 속도유선함수는 관측치와 잘 일치하였다. 본 연구에서 산출된 유선함수는 특정 해역의 저주파 운동의 이해뿐만 아니라 기름유출, 영양염 및 플랑크톤 수송과 관련한 환경유동모델의 초기화 및 검증에 응용될 것으로 기대된다.

• 설비공학논문집
• /
• 제21권11호
• /
• pp.613-620
• /
• 2009

The thermal stresses of a ceramic heat exchanger were analyzed numerically since the ceramic material is good in heat resistance but weak in the thermal stress. The analysis of thermal stress was conducted in the ceramic core with two boundary conditions depending on bolt jointing. The thermal stresses were computed by applying temperature and pressure distributions obtained from the numerical results of conjugate heat transfer to ANSYS WORKRBENCH. When number of bolt joining halls was reduced from $8\times2$ to $4\times2$, the maximum principal stresses decrease by 47.6~50.5% and increase in safety factors by 2.18~2.5 for ultimate tensile strength. Thus, it can be said that bolt joining halls should be minimized in ceramic heat exchanger to be efficient in reducing thermal stress. In addition, the width of particular gas flow passages were revised from 52 mm to 42 mm to reduce maximum thermal stresses since certain passages experienced high thermal stresses. From the revision, safety factors were increased by 13.8~14.1% for the boundary condition of $4\times2$ bolt joining halls. Therefore, it is suggested that thermal stress can be reduced by changing local geometry of a ceramic heat exchanger.

• 한국수자원학회논문집
• /
• 제30권6호
• /
• pp.699-708
• /
• 1997

3차원 추계학적 방법을 사용하여 성층화된 흙에서 유효 비포화투수계수를 유도하였다. 성층화된 흙의 상관길이는 차이가 있기 때문에 추계학식이 단순화되면서 유효 비포화투수계수에 대한 일반식을 해석적으로 유도할 수 있게 된다. 또한 평균흐름이 특정한 범위(습윤전선, 젖음과정, 마름과정)에서 유효한 단순화된 점근식을 유도하였다. 예증으로 이론적인 결과를 가상 점토에 적용하였다. 그 결과 유효 비포화투수계수는 거시적인 이력현상을 나타냄을 알 수 있었다. 거시적인 이력현상이란 미시적인 미력현상이라기 보다는 오히려 흙의 공간적인 변동으로 인하여 발생하는 것이다. 또한 유효 비포와투수계수는 흙의 비균질성을 무시한 경우보다 비균질성을 고려한 경우에서 크게 나타났다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.281-281
• /
• 2017

Recently, global warming by greenhouse gas effect is getting danger and danger for human life and agriculture at present. In Indonesia, according to heavy rain in the agriculture land is often covered by excess water in result crop growth would be affected negative. This water stress triggers roots failure in anaerobic condition for upland crop because of limiting roots respiration. Chili pepper grows in upland sometimes in touch with waterlogging due to rainfall and /or over flow water from river in Indonesia. In this case, roots growing is inhibited by effect of shortage of oxygen at root cap. Therefore, the objective of this study is to observe the plant behavior in waterlogging using mahor local genotypes (Ferosa, Laris, Romario) in Sumatra. The experiment was kept by at 1cm depth water above the soil surface as a waterlogged treatment for ---days. As a result, waterlogging affected plant growth of chili negatively, especially for roots growth. Almost roots were getting bad and changed color for brown during waterlogging. A significant negative effect for nutrient absorption by roots was found in dry weight of all varieties during waterlogging. Dry weight of roots was decreased by 81.4% and 67.6%, and those of aerial part decreased by 74% and 67.2% compared with control in Ferosa and Romario at 1week after treatment. On the other hand, dry weight of roots was decreased only 35% in Laris. Therefore, Laris has a tolerance for waterlogging compared to with other varieties. Also, Laris in SPAD value was kept initial level during waterlogging however those of Ferosa and Romario decreased. Finally, due to impact of waterlogging, it may be the roots become failure because of less aerenchyma formation under anaerobic condition. We need confirm aerenchyma formation morphologically in the future.