• 대한기계학회논문집
• /
• 제12권2호
• /
• pp.338-348
• /
• 1988

본 연구는 환상휜에서 휜 바탕의 온도가 조기적으로 변화할 때, 휜 바탕의 온도가 주기적으로 변화할 때, 휜 주변 뿐만 아니라 휜 선단에서의 대류현상을 고려한 과도 전열에 대한 해석이다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권1호
• /
• pp.22-29
• /
• 2006

Gas turbine engine among Principal internal combustion engines has been mainly applied as an aero and industrial Power plant. In order to increase its thermal efficiency. it has been raised their pressure ratio of compressor and the turbine inlet temperature. To operate above the limit temperature of turbine material, turbine nozzle vanes should be cooled. For this the cooling air is bled from the compressor section of 9as turbine. Meanwhile, to keep high thermal efficiency of 9as turbine, turbine vanes are to be cooled by using small cooling air Therefore, the complex cooling passages are requested to be designed and evaluated the effectiveness of vane cooling by measuring turbine vane temperature. But it is very difficult or impossible for us to measure local turbine temperatures at actual temperature When local heat transfer coefficients are known these can be calculated, therefore this study has been investigated on obtaining these coefficients of turbine vane at room temperature using TLC.

• 한국연소학회지
• /
• 제10권1호
• /
• pp.1-6
• /
• 2005

This paper presents the combustion characteristics of hydrocarbon fuel from a conventional pressure-swirl nozzle of a small-scale burner. The nozzle has orifice diameters of 0.256 mm and liquid flow rates ranging from 50 to 64 mL/min were selected for the experiments. The furnace temperature distribution along the axial distance, the gas emission such as CO, $CO_2$, NOx, $SO_2$, flue gas temperature, and combustion efficiency were studied. The local furnace and flue gas temperatures decreased with an increase in air velocity. At injection pressures of 1.1 and 1.3 MPa the maximum furnace temperatures occurred closer to the burner exit, at an axial distance of 242 mm from the diffuser tip. The CO and $CO_2$concentrations decreased with an increase in air velocity, but they increased with an increase in injection pressure. The effect of air velocity on NOx was not clearly seen at low injection pressures, but at injection pressure of 1.3 MPa it decreased with an increase in air velocity. The effect of air velocity on $SO_2$ concentration level is not well understood. The combustion efficiency decreased with an increase in air velocity but it increased with an increase in injection pressure. It is recommended that injection pressure less than 0.9 MPa with air velocity not above 8.0 m/s would be suitable for this burner.

• Journal of Pharmaceutical Investigation
• /
• 제35권1호
• /
• pp.25-31
• /
• 2005

Depot system for local drug delivery using chitosan hydrogel has been developed to enhance the therapeutic efficacy and to prevent the severe side effect in whole body. Thus, we have prepared an injectable chitosan hydrogel containing liposomes to treat cancers clinically. Anionic liposomes incorporated to improve sustained release efficiency within chitosan hydrogel. The chitosan solution containing liposomes was designed to form a hydrogel complex at body temperature. The released behavior of doxorubicin from liposomes in chitosan hydrogel showed sustained-release caused by diffusion of doxorubicin from temperature responsive liposome into chitosan hydrogel. The chitosan hydorgel containing liposomes enhanced the therapeutic potency for the solid tumor in vivo system. Our results indicate that the liposomes in chitosan hydrogel represent a depot system for local drug delivery.

• 방송공학회논문지
• /
• 제7권4호
• /
• pp.310-316
• /
• 2002

본 논문에서는 동영상 부호화 시 움직임 벡터의 고속 추정을 가능하게 하기 위한 적응 탐색 영역 결정 방식에 대해 제안한다. 시간적 과잉정보를 제거함으로써 압축 효율을 개선하고자 하는 움직임 벡터 추정을 위한 블록 매칭 방식 (BMA: Block Matching Algorithm)은 움직임 벡터의 정확성 및 계산량 측면에서 상호 교환적인 특성을 갖고 있다. 고속 움직임 추정을 위한 전처리 과정인 제안 방식은 인접 블록 움직임 벡터의 국부 통계 특성을 이용하여 움직임 탐색 영역을 적응적으로 결정한다. 실험 결과를 통해 제안된 방식이 압축 효율의 손상 없이 상당한 계산량이 줄었음을 확인할 수 있었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2005년도 동계 학술대회 논문집
• /
• pp.76-82
• /
• 2005

This paper presents the combustion characteristics of hydrocarbon fuel from a conventional pressureswirl nozzle of a small-scale burner. The nozzle has orifice diameters of 0.256 mm and liquid flow rates raging from 50 to 64 mL/min were selected for the experiments. The furnace temperature distribution along the axial distance, the gas emission such as CO, $CO_2,\;NOx,\;S0_2,$ flue gas temperature, and combustion efficiency were studied. The local furnace and flue gas temperatures decreased with an increase in air velocity. At injection pressures of 1.1 and 1.3 MPa the maximum furnace temperatures occurred closer to the burner exit, at an axial distance of 242 mm from the diffuser tip. The CO and $CO_2$ concentrations decreased with an increase in air velocity, but they increased with an increase in injection pressure. The effect of air velocity on NOx was not clearly seen at low injection pressures, but at injection pressure of 1.3 MPa it decreased with an increase in air velocity. The effect of air velocity $SO_2$ concentration level is not well understood. The combustion efficiency decreased with an increase in air velocity but it increased with an increase in injection pressure. It is recommended that injection pressure less than 0.9 MPa with air velocity not above 8.0 m/s would be suitable for this burner.

• 대한전자공학회논문지TE
• /
• 제39권2호
• /
• pp.66-75
• /
• 2002

본 논문에서는 역전파 신경회로망의 학습능률을 향상시키기 위한 방법으로 발생한 오차에 따라서 학습파라미터와 은닉층의 수를 적응적으로 변경시킬 수 있는 적응 역 전파 학습알고리즘을 제안하였다. 제안한 알고리즘은 역전파 신경회로망이 국소점으로 수렴하는 문제를 해결할 수 있고 최적의 수렴환경을 만들 수 있다. 제안된 알고리즘을 평가하기 위하여 배타적 논리합, 3-패리티 및 7${\times}$5 영문자 폰트의 학습을 이용하였다. 실험결과, 기존에 제안된 알고리즘들에 비하여 국소점에 빠지게 되는 경우가 감소하였고 약 17.6%~64.7%정도 학습능률이 향상하였다.

• Journal of the Optical Society of Korea
• /
• 제20권6호
• /
• pp.745-751
• /
• 2016

A detection algorithm, based on the combined local-global (CLG) optical-flow model and Gaussian pyramid for a moving target appearing against a dynamic background, can compensate for the inadaptability of the classic Horn-Schunck algorithm to illumination changes and reduce the number of needed calculations. Incorporating the hypothesis of gradient conservation into the traditional CLG optical-flow model and combining structure and texture decomposition enable this algorithm to minimize the impact of illumination changes on optical-flow estimates. Further, calculating optical-flow with the Gaussian pyramid by layers and computing optical-flow at other points using an optical-flow iterative with higher gray-level points together reduce the number of calculations required to improve detection efficiency. Finally, this proposed method achieves the detection of a moving target against a dynamic background, according to the background motion vector determined by the displacement and magnitude of the optical-flow. Simulation results indicate that this algorithm, in comparison to the traditional Horn-Schunck optical-flow algorithm, accurately detects a moving target undergoing illumination changes against a dynamic background and simultaneously demonstrates a significant reduction in the number of computations needed to improve detection efficiency.

• 한국통신학회논문지
• /
• 제30권2C호
• /
• pp.41-48
• /
• 2005

본 논문에서는 H.264 표준 부호화 방식의 성능 향상 및 저 계산량을 위한 가우시안 모델 기반의 전처리 필터에 대해 제안한다. 일반적인 영상 획득 장치에서 첨가된 노이즈에 의해 훼손된 동영상은 다수의 고주파 성분으로 인하여 시각적으로 불편한 현상과 압축 효율의 저하를 초래한다. 본 논문에서는 필터링 과정에서 국부 통계적 특성과 양자화 매개변수를 이용하여, 주어진 양자화 스텝 사이즈에서 노이즈 성분을 제거하고 시각적인 효과와 비트율을 개선시켜 압축 효율을 개선하고자 한다. 또한 전처리 필터의 계산량을 줄이기 위하여 간단한 형태의 국부 통계적 특성을 재 정의하고 노이즈에 대한 매개변수를 H.264의 변환과 양자화 과정을 통하여 유추하여 적용하였다. 제안된 방식의 성능을 실험 결과로부터 확인할 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.839-847
• /
• 2016

Energy recovery battery testing systems (ERBTS) have been widely used in battery manufactures. All the ERBTS are connected in parallel which forms a special and complicated micro-grid system, which has the shortcomings of low energy recovery efficiency, complex grid-connected control algorithms issues for islanded detection, and complicated power circuit topology issues. To solve those shortcomings, a DC micro-grid system is proposed, the released testing energy has the priority to be reutilized between various testing system within the local grid, Compared to conventional scheme, the proposed system has the merits of a simplified power circuit topology, no needs for synchronous control, and much higher testing efficiency. The testing energy can be cycle-used inside the local micro-grid. The additional energy can be recovered to AC-grid. Numerous experimental comparison results between conventional and proposed scheme are provided to demonstrate the validity and effectiveness of the proposed technique.