• International Journal of Air-Conditioning and Refrigeration
• /
• 제14권4호
• /
• pp.156-165
• /
• 2006

Convective boiling heat transfer coefficients were measured in a horizontal minichannel with R-l34a. The test section was made of stainless steel tube with an inner diameter of 3.0 mm and a length of 2m. It was uniformly heated by applying electric current directly to the tube. Local heat transfer coefficients were obtained for heat fluxes from 10 to $40kW/m^2$, mass fluxes from 200 to $600kgT/m^2s$, qualities up to 1.0, and the inlet saturation temperature of $10^{\circ}C$. The experimental results were mapped on Wojtan et $al.'s^(7)$ and Wang et $al.'s^(8)$ flow pattern maps. The nucleate boiling was predominant at low vapor quality whereas the convective boiling was predominant at high vapor quality. Laminar flow appeared in the flow with minichannel. The experimental results were compared with six existing two-phase heat transfer coefficient correlations. A new boiling heat transfer coefficient correlation based on the superposition model for refrigerants was developed with mean and average deviations of 10.39% and -3.66%, respectively.

• 설비공학논문집
• /
• 제15권10호
• /
• pp.809-820
• /
• 2003

The present study investigates effects of flow velocity on the convective heat/mass transfer characteristics in wavy ducts of a primary surface heat exchanger application. Local heat/mass transfer coefficients on the wavy duct sidewall are determined by using a naphthalene sublimation technique. The flow visualization technique is used to understand the overall flow structures inside the duct. The aspect ratio and corrugation angle of the wavy duct is fixed at 7.3 and 145$^{\circ}$ respectively, and the Reynolds numbers, based on the duct hydraulic diameter, vary from 100 to 5,000. The results show that there exist complex secondary flows and transfer processes resulting in non-uniform distributions of the heat/mass transfer coefficients on the duct side walls. At low Re (Re<1000), relatively high heat/mass transfer regions like cell shape appear on both pressure and suction side wall due to the secondary vortex flows called Taylor-Gortler vortices perpendicular to the main flow direction. However, at high Re (Re>1000), these secondary flow cells disappear and boundary layer type flow characteristics are observed on pressure side wall and high heat/mass transfer region by the flow reattachment appears on the suction side wall. The average heat/mass transfer coefficients are higher than those of the smooth circular duct due to the secondary flows inside wavy duct. And also friction factors are about two times greater than those of the smooth circular duct.

• 통합자연과학논문집
• /
• 제13권2호
• /
• pp.47-57
• /
• 2020

The purpose of this study was to understand experiences of successful aging of community-dwelling elderly living in the Korean community using mixed methods. This study is a mixed methods research using convergent parallel design. 483 elderly people living in the 2 cities were selected as subjects to collect quantitative data. For qualitative data collection, 6 elderly people participated. The level of successful aging for elderly people living at home scored an average of 4.30 ± .59 out of 5 points (4.46 ± .64 for self-efficacy, 4.31 ± .65 for good self-control, 4.29 ± .70 for satisfaction with children's success, and 4.26 ± .61 for partnership with spouses). The main themes of successful aging derived by interview were as follows: 1) fulfill responsibilities of raising children as parents, 2) establish a stable life to overcome difficulties, 3) accept the body being different from the past, and 4) live in harmony with people around them. Based on these results, it is necessary to provide useful health care services that can be used in the local community and to provide service utilization information through various routes in order to achieve a successful aging.

• 한국지진공학회논문집
• /
• 제7권2호
• /
• pp.39-48
• /
• 2003

반응수정계수의 핵심구성요소인 연성계수에 대하여 통계적 분석을 수행하였다. 연성계수의 체계적인 산정을 위하여 총 1,860개의 지진기록을 수집하였다. 수집된 지진기록을 지반 전단파의 평균속도에 따라 4가지로 분류하고, 탄소성 이력거동을 가지는 단자유도 구조물에 대하여 비탄성 스펙트럼을 작성하였다. 작성된 비탄성 스펙트럼으로부터 연성계수를 구하고, 변위연성비, 토질조건, 규모 및 진앙거리가 연성계수에 미지는 영향을 분석하였다. 토질 조건별로 평균연성계수를 구하고, 산정된 연성계수의 산포도를 검토하기 위하여 변동계수를 산정하였다.

• 간호행정학회지
• /
• 제20권3호
• /
• pp.332-341
• /
• 2014

Purpose: The purpose of this study was to investigate the relationship among turnover intention, emotional labor, and communication competence in nurses. Methods: The participants for this study were 297 nurses from three general hospitals in two local cites in Korea. Data were collected by self-administered questionnaires from August 26 to September 10, 2013 and analyzed using descriptive statistics, One-way ANOVA, t-test, Pearson Correlation, Stepwise Multiple Regression with the SPSS/WIN 18.0 program. Results: The average scores for turnover intention, emotional labor, and communication competence respectively, were 3.45, 3.08, and 3.44 out of 5. The novices recognized that their emotional labor and turnover intention were significantly higher, and their communication competence was lower than other nurses. Nurses' turnover intention had a positive relationship with their emotional labor, but no relationship with communication competence. Job satisfaction, frequency of emotional expression, and emotional dissonance had an effect on nurses' turnover intention. Conclusion: The results show that emotional labor and job satisfaction are very important factors affecting nurses' turnover intention. So, nurse managers should try to minimize nurses' emotional labor and maximize their job satisfaction by developing various human relationship educational and support programs and using them.

• 한국정보통신학회논문지
• /
• 제8권7호
• /
• pp.1453-1463
• /
• 2004

기존의 레벨셋을 이용한 이미지 분할 방법은 화소값의 기울기를 이용하기 때문에 지역적 형태에 좌우되는 문제점을 지니고 있다. 본 논문에서는 평활한 구동력을 위하여 레벨 셋 함수와 새로운 보상 평활화 함수를 결합시키는 하이브리드 방법을 이용한 방법이 소개된다. 대부분의 경우에 3 교점을 가지고 있지 않다는 가정하에 보상함수를 얻는 방법을 대안으로 고려하였다. 보상함수의 주요 역할은 원보상 함수와 평균 보상함수의 차가 새로운 레벨셋 함수의 합리적인 구동력으로 소개될 수 있다. 본 논문에서 제안한 하이브리드 방법은 기존 레벨셋을 이용한 방법의 단점을 최소화시키는 방법이다.

• Journal of Communications and Networks
• /
• 제11권4호
• /
• pp.327-336
• /
• 2009

Geographic routing has been considered as an attractive approach in wireless sensor networks, since it routes data packets by using location information rather than global topology information. In geographic routing schemes, packets are usually sent along the boundary of a hole by face routing to detour the hole. As result, all data flows which need to detour the hole are concentrated on the boundary of the hole. This hole detour scheme results in much more energy consumption for nodes at the hole boundary, and the energy exhaustion of hole boundary nodes enlarges the holes. This is referred to as a hole diffusion problem. The perimeter mode may also lead to data collisions on the hole boundary nodes if multiple data flows need to bypass a hole simultaneously. In this paper, we propose a hole modeling and detour scheme for geographic routing in wire-less sensor networks. Our hole modeling and detour scheme can efficiently prevent hole diffusion, avoid the local minimum problem faced by geographic routing protocols, and reduce data collisions on the hole boundary nodes. Simulation results show that the proposed scheme is superior to the other protocols in terms of control overhead, average delivery delay and energy consumption.

• 대한기계학회논문집B
• /
• 제21권5호
• /
• pp.602-614
• /
• 1997

In order to evaluate the effects of equivalence ratio, initial pressure and temperature on the laminar flame propagation process, and combustion radicals characteristics, experimental approaches are carried out in methane-air premixture using a constant volume chamber. Local and average radical intensities were measured to determine the time and spatial correlations between each radicals; C $H^{*}$(431 nm), $C_{2}$$^{*}$ (517 nm) and O $H^{*}$(309 nm) . The results are showed that two kinds of equation were proposed for the cases of continuous flame and intermittent flame type to evaluate actual equivalence ratio using relative intensities with each radicals. Both equations were agreed with actual equivalence ratio within 10% errors range. And schlieren photo and CCD image were compared with flame sizes at equivalence ratio 1.0.o 1.0.

• Journal of Mechanical Science and Technology
• /
• 제17권8호
• /
• pp.1171-1184
• /
• 2003

An experimental study on critical heat flux (CHF) has been performed in an internally heated vertical annulus with non-uniform heating. The CHF data for the chopped cosine heat flux have been compared with those for uniform heat flux obtained from the previous study of the authors, in order to investigate the effect of axial heat flux distribution on CHF. The local CHF with the parameters such as mass flux and critical quality shows an irregular behavior. However, the total critical power with mass flux and the average CHF with critical quality are represented by a unique curve without the irregularity. The effect of the heat flux distribution on CHF is large at low pressure conditions but becomes rapidly smaller as the pressure increases. The relationship between the critical quality and the boiling length is represented by a single curve, independent of the axial heat flux distribution. For non-uniform axial heat flux distribution, the prediction results from Doerffer et al.'s and Bowling's CHF correlations have considerably large errors, compared to the prediction for uniform heat flux distribution.

• 한국태양에너지학회 논문집
• /
• 제25권4호
• /
• pp.101-110
• /
• 2005

An experimental study of heat transfer of submerged water jet impinging normally on a flat plate is presented. Heat transfer measurements obtained with Reverse cone type nozzle(Rcone) were compared to those obtained with Cone type nozzle(Cone) and Square edged type nozzle(Vert) of the same diameter(D=8mm) for different jet velocities in the range of $3{\sim}7m/s(Re_D=30000{\sim}70000)$ and various nozzle-to target spacings($H/D=2{\sim}10$). The local Nusselt number profiles exhibited a sharp drop for $r/D{\leq}0.5$ and 2nd, 3rd peaks revealed at r/D=2, 3 respectively, followed by a slower decrease there after. The peaks were weakened with increasing the nozzle-to target spacing and decreasing the jet velocity. The stagnation Nusselt number of the Reverse cone type nozzle was larger than those of the other two nozzles for H/D=2. 10, but Cone type nozzle had the highest value for $H/D=4{\sim}8$. Also average Nusselt number of the Reverse cone type nozzle was higher than those of the other two nozzles at $H/D=2{\sim}10$, except for $V_o=7ms$ of H/D=6.