• Journal of the Korean Society for information Management
• /
• v.35 no.2
• /
• pp.187-213
• /
• 2018

This study was intended to propose a plan for the operation of the local assembly information services as a service for the specialized service of the National Assembly Library's depository library. To that end, the information services of the national assembly libraries, the local assembly libraries, and the social science libraries were investigated and analyzed. We drew the implications based on the results of the analysis and finally developed the operational strategies such as the strengthening the data sharing system for the local council, the assembly information reply service for local councils and the information literacy program for users.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.24-25
• /
• 2015

To realize the global standard of the assembly facility, one of key point is an influence of local characteristic. The global standardized information could be a useful input, especially at the beginning stage of the project. The content should be carefully checked against local requirements, in order to develop an Assembly Facility design to meet local regulations & characteristics. The level of input information required in each step is different depend on regions & countries. At an execution stage of the project, the global standard input needs to be updated as customized final input for the construction. There will be many issues to be clarified and coordinated so that the Assembly facilities meet the final requirements for the production technology. As a result, it is important to understand the timing to use the global standard information and the contents what is needed to adapt to the local characteristics. And close collaboration between production technology team and facility team is always required.

• The Korean Journal of Archival Studies
• /
• no.14
• /
• pp.241-288
• /
• 2006

For cope with the participating government promoted local decentralization of the present time, local governments are coming to aim at the realization of local governance. Local governance refers to a way of solving public problems of urban area through partnership which is a collaboration and participation based on 'relationship' among diverse interested parties such as executive authority of policy, private sectors. First of all, it is most important task to make transparency and responsibility of all people and networks by themselves through sharing information. With like this kind of a background, local assembly is an momentos body of local governance because it is a decision making organization at the same time as a representative organization of local residents, and it has a relationship of 'check and balance' with chiefs of local governments as an organization monitoring and supervising the administration of an executive authority. Not the less, information about local assembly does not open to the public or exist. Even some informations open to the public, they are not enough to be settled distrust and low-valuation by civil society. Now Local assembly is face to a point that improve over all of record management. This study is based like this critical mind, then, it examines throughly local assembly's realities by suggestion with reforming plan of record management. Record can embody true values when record management practices indefatigably through prudential system from production until preservation. Accordingly, this study suggests management of transaction unit without the omission of record. Also this study is satisfy the condition of Korean record management system with proposals of record management policy and establishment of record center. At the conclusion of study, it puts effects into shape that local assembly secure transparency and responsibility and organize local governance by record management.

• Journal of Information Management
• /
• v.42 no.1
• /
• pp.221-244
• /
• 2011

Many records and documents are produced during the process of functions of local councils such as resolution, monitoring and balancing function, representation for the residents, Such records of local councils have importance in terms of objective basis and standards for local policy building and making. The most essential records among these are those of local councils assembly. The fundamental function of local councils is the assembly of individual members of the council and standing committees. For this, the author firstly reviewed the current management system of local council assembly records focusing on Daejeon Yuseonggu Council and conducted researches and interviews with the officers responsible for record keeping. And finally, the author analyzed such researches and findings. From this analysis, the author discovered the problems in the management of record keeping and suggested the improvement for the systematic management firstly in terms of institutional aspects and secondly in terms of the stages of record keeping and management based on ISO 15489, the international standard for information and documentation, records management.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.6 s.183
• /
• pp.136-142
• /
• 2006

Optimization of the aircraft panel assembly constructed by skin and stringers is investigated. For the design of panel assembly of the aircraft structure, it is necessary to determine the best shape of the stringer which accomplishes lowest weight under the condition of no instability. A panel assembly can fail in a variety of instability modes under compression. Overall modes of flexure or torsion can occur and these can interact in a combined flexural/torsion mode. Flexure and torsion can occur symmetrically or anti-symmetrically. Local instabilities can also occur. The local instabilities considered in this paper are buckling of the free and attached flanges, the stiffener web and the inter-rivet buckling. A program is developed to find out critical load for each instability mode at the specific stringer shape. Based on the developed program, optimization is performed to find optimum stringer shape. The developed instability analysis program is not adequate for sensitivity analysis, therefore RSM (Response Surface Method) is utilized instead to model weight and instability constraints. Since the problem has many local minimum, Genetic algorithm is utilized to find global optimum.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.471-491
• /
• 2016

Traditional limit equilibrium method needs an assumption of the failure surface to calculate the bearing capapcity of the shallow foundation. From the viewpoint of the mechanics of granular materials, however, the failure of the soil mass is initated by the local buckling of the contact force chains. In this study we observed the directional distribution of the contact force chains in the granular assembly stacked by model particles subjected to the model shallow foundation during loading. Two sets of the assemblies with a regular structure and initially local imperfection were prepared for tests. Existence of the initial local imperfection has a significant effect on the directional distribution of the contact force chains. The bearing capacity of the assembly with local imperfection is only 67% the capacity of the assembly with the regular structure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.1
• /
• pp.213-221
• /
• 1996

An assembly sequence is considered to be optimal when is minimizes assembly cost while satisfying assembly constraints. To derive such an optimal sequence for robotic assembly, this paper proposes a method using a simulated annealing algorithm. In this method, an energy funciton is derived inconsideration of both the assembly constraints and the assembly cost. The energy function thus derived is iteratively minimized until no further change in energy occurs. During the minimization, the energy is occationally perturbed probabilistically in order to escape from local minima. The minimized energy yields an optimal assembly sequence. To show the effectiveness of the proposed method, case studies are presented for industrial products such as an electrical relay and an automobil alternator. The performance is analyzed by comparing the results with those of a neural network-based method, based upon the optimal solutions of an expert system.

• IE interfaces
• /
• v.17 no.3
• /
• pp.375-383
• /
• 2004

The purpose of this study is to investigate the characteristics of vibration induced by the powered hand tools used in the automobile assembly lines, and estimate the prevalence of vibration syndrome. The acceleration levels of four major powered hand tools were measured using the ISO 5349 method along with the time of exposure to the vibration of the hand tools. Four-hour-energy-equivalent frequency-weighted accelerations ranged from $1.27m/s^2$ to $2.58m/s^2$, After exposure to vibration for 12.6 years, about 10% of the workers using impact ranches were expected to develop Raynaud's disease. For the workers using grinders, 16.6% of the workers were expected to develop Raynaud's disease. The results would be of help in developing the guidelines of local vibration control.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3207-3216
• /
• 2021

Three-dimensional structures of a vortical flow field and heat transfer characteristics in a partially blocked 7-pin fuel assembly mock-up of sodium-cooled fast reactor have been investigated through a numerical analysis using a commercial computational fluid dynamics code, ANSYS CFX. The simulation with the SST turbulence model agrees well with the experimental data of outlet and cladding wall temperatures. From the analysis on the limiting streamline at the wall, multi-scale vortexes developed in axial direction were found around the blockage. The vortex core has a high cladding wall temperature, and the attachment line has a low cladding wall temperature. The small-scale vortex structures significantly enhance the convective heat transfer because it increases the turbulent mixing and the turbulence kinetic energy. The large-scale vortex structures supply thermal energy near the heated cladding wall surface. It is expected that control of the vortex structures in the fuel assembly plays a significant role in the convective heat transfer enhancement. Furthermore, the blockage plate and grid spacer increase the pressure drop to about 36% compared to the bare case.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.507-512
• /
• 1992

This paper presents a method for the automatic generation of assembly sequences based on the recursive extraction of a preferred part along with the verification of its disassemblability. To verify the disassemblability of the part we inference the geometric precedence constraints using a method of extracting separable directions for the part and determine the disassemblability cost by the separability and stability cost. The proosed method provides a local optimal solution of finding a cost effective assembly plan, and the feasibility of calculating robot motion programs by evaluating separable directions in flexible manufacturing application. A case study is given to illustrate the concepts and procedure of the proposed scheme.