• Journal of the Korean Electrochemical Society
• /
• v.10 no.2
• /
• pp.88-93
• /
• 2007

Nano-sized Sn particles were coated with Ni-P layer using an electroless deposition method and their anodic performance was tested for lithium secondary batteries. Uniform coating layers were obtained, of which the thickness was controlled by varying the $Ni^{2+}$ concentration in the plating bath. It was found that the Ni-P layer plays two important roles in improving the anodic performance of Sn powder electrode. First, it prevents the inter-particle aggregation between Sn particles during the charge/discharge process. Second, it provides an electrical conduction pathway to the Sn particles, which allows an electrode fabrication without an addition of conductive carbon. A pseudo-optimized sample showed a good cyclability and high capacity ($>400mAh\;g^{-1}$) even without conductive carbon loading.

• Journal of Ship and Ocean Technology
• /
• v.11 no.4
• /
• pp.1-20
• /
• 2007

After the introduction of the World Trade Organization, large scale container ships are being used as a means of transportation for international trade. Therefore, improving the loading and unloading capability of container quays is the most economic way, considering the cost needed for the establishment or expansion of container quays. In this paper, a new container cargo handing system that is equipped with a high performance container crane is suggested. A structural analysis on the container crane is also conducted to decide the form and size of structural member scantlings, using NASTRAN, which is a general structure analysis program.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.320-328
• /
• 2001

Base Isolation system is an effective design strategy that provides a practical substitute for the seismic design of bridge. In this study, the dynamic tests were performed on two kinds of aseismic bridge bearings : Hydampot (hysteretic damping bearing) and Dynapot . Then, the dynamic analysis was carried out far a bridge using the experimental results to estimate the seismic performance of the bearings. Analysis was performed for four types oi earthquake loadings. The results of the dynamic test and theoretical analysis indicate that the performance of both bridge bearings is appropriate fur the earthquake loading.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.366-373
• /
• 2000

This paper represents the results carried out to determine the dynamic response characteristics of Korea High Speed Rail(KHSR) bridges. The responses of the KHSR bridges subjected to the moving train loading are obtained through the simplified method for the 2-dimensional train/track/bridge interaction analysis in which the eccentricity of axle loads and the effect of the torsional forces acting on the bridge are included for the more accurate train/track/bridge interaction analysis. The results of the analyses are compared with the field test data to verify the performance of the 2-dimensional train/track/bridge interaction analysis method.

• Explosives and Blasting
• /
• v.19 no.1
• /
• pp.101-110
• /
• 2001

Depleted uranium (DU) outperforms tungsten heavy alloys (WHA) by about 10%. Because of environmental and hence, political concerns, there is a need to improve WHA performance, in order to replace the DU penetrators. A technique of metal powder compaction by the detonation of an explosive has been applied to tungsten-titanium(W-Ti) powder materials that otherwise may be difficult to fabricate conventionally or have dissimilar, nonequilibrium, or unique me1astab1e substructures. However, the engineering properties of compacted materials are not widely reported and are little known especially for the "unique" composition of W-Ti alloy. To develop high-performance tungsten composites with superior ballistic attributes, it is necessary to understand, carefully document controlled experimental results, and develop basic computational models for potential composites with controlled microstructures. A detailed understanding and engineering application of W-Ti alloy can lead to the development of new structural design for engineering components and materials.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.4
• /
• pp.77-84
• /
• 2017

As an alternative to coupling beam in shear wall system, application of the damper which can dissipate energy is increasing. In this study, lintel beam type steel damper which is simple to construct and change depending on design load was proposed. Cyclic loading test was conducted to compare reinforced concrete coupling beam and lintel beam type steel damper. The test results showed that lintel beam type steel damper has higher initial stiffness and energy dissipation capacity than reinforced concrete coupling beam.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.464-469
• /
• 2000

Since the occurrence of 1995 Kobe earthquake, there have been much concern about seismic design for various infrastructures, inclusive of bridge structures. This research aims at evaluating the seismic performance of the existing R/C bridge piers, which were nonseismically or seismically designed in accordance with the provision of Korea Highway Design Specification. Further experimental investigations have been doing to figure out the retrofitting effects of nonseismic R/C bridge piers confined with glass fiber at the plastic hinge zone. Pseudo-dynamic tests have been carried out in nine scaled R/C column specimens to investigate their hysteretic behavior under earthquake loading. Test parameters are axial load, input ground motion confinement steel ratio, glass fiber and etc.

• Journal of the Korean Society of Safety
• /
• v.26 no.2
• /
• pp.48-61
• /
• 2011

In this study, static tests were done on the joints between precast manholes and the joints between manhole and sewer. The static loading tests in not only elastic range but also ultimate state of model members were carried out to investigate the bond strength and ultimate load of a joint of precast manholes. Specimens were tested in bending, horizontal shear, horizontal shear of circumferencial direction and direct tension. The results of tests indicated good structural performance of the joints between precast manholes and the joints between manhole and sewer.

• Transactions of the Society of Information Storage Systems
• /
• v.8 no.1
• /
• pp.33-38
• /
• 2012

To investigate of load/unload performance, FE (finite element) model of conventional suspension and HAMR suspension were made. The FE models were verified by modal analysis. In the loading simulation, the conventional system could stably load onto the disk without contact. On the other hand, the HAMR suspension which had an optical fiber and prism occurred slider - disk contact. In the unloading process, the conventional system was unloaded without contact. However, in the HAMR suspension, the contact between slider and disk was occurred at the moment that the dimple was separated during unload process. Therefore the load/unload performance of HAMR decrease with high stiffness, it is necessary that stiffness of HAMR suspension should reduced with design parameters of optical fiber and prism.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.1
• /
• pp.61-65
• /
• 2001

To review mass transfer trays from a process of view, the dependence of efficiency in loading ranges and maximum loadings with an acceptable efficiency of traditional tray have to be known. It is reported about the performance of the metallic Dualflex, relatively new high performance packing. Absorption, desorption and rectification tests as well as pressure drop and maximum capacity are concerned, indicate the superiority of the Dualflex over the general packing of comparable, main process. The process engineering characteristics show that Dualflex can be applied for all mass transfer precesses and it is to be recommended especially for those high capacity separations which requite allow low pressure drop because of the thermal sensibility of the product or because of the need of energy saving.