• 한국기계연구소 소보
• /
• 통권20호
• /
• pp.27-32
• /
• 1990

A counter balance valve is used as one part of hydraulic motor brake system. The function of this valve is to protect over-run or free falling of inertia load. But occasionally the brake system with counter balance valve makes some undesirable problems such as pressure surges or vibrations. In this study, for the purpose of easy estimation about dynamic chrcteristics of hydraulic system including counter balance valve, precise formulation describing fluid dynamics and valve dynamics under various boundary conditions were made. dynamic caracteristics were analysed by numerical intergration using Runge-Kutta method, because the equations in this circuit with counter balance valve contain various nonlinear terms. So the analyzing method developed in this study enabled very easy estimating the relation between the performance of counter balance valve and various physical parameters related to the valve.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.606-610
• /
• 2003

This paper presents a simple carrier symmetric method for the voltage balance of flying capacitors in FCMLI(flying capacitor multi-level inverter). To achieve the voltage balance of flying capacitors, the utilization of each carrier must be balanced during a half-cycle of the switching period such as PSPWM(Phase-Shifted PWM). However, the CRPWM(Carrier Redistribution PWM) method causes the fluctuation of flying capacitor voltages because the balanced utilization of carriers is not achieved. Moreover, it does not consider that the load current change has an influence on flying capacitor voltages by assuming that the current flows Into the load. To overcome the drawbacks of CRPWM, it is modified by the technique that carriers of each band are disposed symmetrically at every fundamental period. Firstly, the CRPWN method is reviewed and the theory on voltage balance of flying capacitors is analyzed. The proposed method Is introduced and is verified through the experiment result.

• Structural Engineering and Mechanics
• /
• 제66권4호
• /
• pp.543-555
• /
• 2018

Fiber Reinforced Polymer (FRP), which has a high strength to weight ratio, are now regularly used for strengthening of deficient reinforced concrete (RC) structures. While various researches have been conducted on FRP strengthening, an area that still requires attention is predicting the debonding failure load of prestressed FRP strengthened RC beams. Application of prestressing increases the capacity and reduces the premature failure of the beams largely, though not entirely. Few analytical methods are available to predict the failure loads under flexure failure. With this paucity, this research proposes a method for predicting debonding failure induced by intermediate crack (IC) for prestressed FRP-strengthened beams. The method consists of a numerical study on beams retrofitted with prestressed FRP in the tension side of the beam. The method applies modified Branson moment-curvature analysis together with the global energy balance approach in combination with fracture mechanics criteria to predict failure load for complicated IC-induced failure. The numerically simulated results were compared with published experimental data and the average of theoretical to experimental debonding failure load is found to be 0.93 with a standard deviation of 0.09.

• 산업기술연구
• /
• 제29권A호
• /
• pp.123-126
• /
• 2009

Cluster-based servers are utilized for large scale streaming services. These servers show good performance under fair resource usage balance policies between backend nodes. In this paper, cluster-based VOD servers are implemented based on WMI functions. Based on these functions, the information of resource usages in backend nodes can be exchanged and also the working states of cluster nodes can be monitored periodically. In experiences, we find motivations to design an effective load balancing policy. In addition, to provide reliable streaming services, the method to detect a partial failure in cluster-based servers is proposed.

• 한국유체기계학회 논문집
• /
• 제9권5호
• /
• pp.7-13
• /
• 2006

In the present study, we develop an analysis module to be applicable to design of sliding thrust bearings. The pressure equation is solved by using the finite element method. Average lubricant temperature is obtained from using the energy balance method. The module developed has been applied to three types of thrust bearing, such as tapered-land thrust bearings of angular and diamond types, and tilting-pad thrust bearings. Effects of the dam of the tapered-lad thrust bearings have also been investigated. It has been seen that the tapered-land thrust bearings of angular type result in the highest load capacity, while the tilting pad thrust bearings result in the lowest lubricant temperature. It has also been seen that the dam in the tapered-land thrust bearings increases both the load capacity and lubricant temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.381-383
• /
• 2003

The authors have developed a solution method based on the incremental algorithm. The optimal load balance between feeders is found through the incremental algorithm with allowing the loop configuration. Therefore loops can be configured in the resulting configuration, and then we must eliminate all loops to satisfy radiality of distribution system because the distribution system is operated under radial status. But the optimal load balance through incremental algorithm is deteriorated when the loops are eliminated. In this paper, authors propose a new method which is to improve the searching procedure of path in the incremental algorithm, that is, so as not to make loop in the path configuration.

• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.162-168
• /
• 2004

정전복구 문제는 배전계통에서 고장이 발생한 겨우 사고 구간 이후의 비 고장 정전구간내의 부하를 적절한 스위칭을 통하여 인접된 건전피더로 빠른 시간 내에 절체 시키는 것이며 이때 방사상 선로구성, 전압, 전류 등의 제약조건들이 만족되어야 한다. 본 논문에서는 건전피더들이 고장 발생 직후 계통으로 공급하여야 할 부하의 총량을 규정하는 함수와 순환적 최적우선탐색을 이용하여 사고 발생 시 단지 정전의 복구뿐만 아니라 부하의 균등화까지도 함께 수행되는 효율적인 정전복구 알고리즘을 제시한다. 제시되는 알고리즘은 건전피더들이 고장 발생 직후 계통으로 공급하여야 할 부하의 총량을 규정하는 함수로부터 각 피더들이 공급하여야 할 목표치를 제안하고 또한 지수의 목적 값을 만족하는 스위칭을 찾기 위하여 순환적 최적우선 탐색법을 이용한다. 본 논문에서는 제시한 알고리즘을 실제로 서울의 K지사에서 윤용하고 있는 108모선에 적용하여 결과를 도출 했으며 그 결과 제안된 알고리즘을 이용할 경우에 적은 탐색 횟수로 정전이 복구됨과 동시에 건전 선로간의 부하가 균등화되었음을 입증하였다.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1315-1324
• /
• 2018

A novel three-phase four-wire inverter topology is presented in this paper. This topology is equipped with a special capacitor balance grid without magnetic saturation. In response to unbalanced load and unequal split DC-link capacitors problems, a qusi-full-bridge DC/DC topology is applied in the balance grid. By using a high-frequency transformer, the energy transfer within the two split dc-link capacitors is realized. The novel topology makes the voltage across two split dc-link capacitors balanced so that the neutral point voltage ripple is inhibited. Under the condition of a stable neutral point voltage, the three-phase four-wire inverter can be equivalent to three independent single phase inverters. As a result, the three-phase inverter can produce symmetrical voltage waves with an unbalanced load. To avoid forward transformer magnetic saturation, the voltages of the primary and secondary windings are controlled to reverse once during each switching period. Furthermore, an improved mode chosen operating principle for this novel topology is designed and analyzed in detail. The simulated results verified the feasibility of this topology and an experimental inverter has been built to test the power quality produced by this topology. Finally, simulation results verify that the novel topology can effectively improve the inhibition of an inverter with a three-phase unbalanced load while decreasing the value of the split capacitor.

• 대한임상전기생리학회지
• /
• 제8권2호
• /
• pp.25-31
• /
• 2010

Purpose : The purpose of this study was to investigate knee muscle strength, balance, and proprioception by walking while giving weight to the ankle joint at a load of 0%, 10%, and 15% gradient on a treadmill. Methods : Twenty-four subjects were divided into three groups. Group A walked on a 0% gradient while giving weight to the ankle joint as a load. Group B walked on a 10% gradient while giving weight to the ankle joint as a load. Group C walked on a 15% gradient while giving weight to the ankle joint as a load. This was performed three times per week for four weeks. The walking speed was set at 4km/hour and the walking time was set at 20 minutes. Measurements were performed before and after the experiment. Biodex medical system and Balance system SD were used as measuring instruments. Results : There was no significant difference between the gradients in muscle strength, balance and proprioception. However, there were differences in pretest and posttest measurements for muscle strength, balance and proprioception in each gradient. In particular, the gradient of 10% showed a significant difference. Conclusion : According to the results of this study, to use a 10% gradient is effective when walking while giving weight to the ankle joint as a load.

• 생물환경조절학회지
• /
• 제24권3호
• /
• pp.147-152
• /
• 2015

온실의 냉방부하 산정방법 개발을 위하여 열수지 방법에 기초한 냉방부하 산정식을 구성하고, 포그냉방 온실에서 냉방부하를 실측하여 검증하였다. 포그냉방 온실의 냉각열량은 포그분사에 의한 증발수량에 물의 증발잠열을 곱하여 구할 수 있다. 여기서, 증발수량은 포그 분사량에 증발효율을 곱하면 구할 수 있으며, 즉 분무수량을 계측하고 포그시스템의 증발효율을 알면 온실의 냉방부하를 실측할 수 있다. 따라서 온실의 냉방부하 실측을 위하여 실험온실에서 포그시스템의 증발효율을 실험하고, 실험온실의 열환경 계측과 더불어 포그 분사량을 계측하여 냉방부하 산정방법을 검토하였다. 먼저 냉방부하 산정식의 환기전열량을 검토하기 위하여 냉방을 실시하지 않은 상태에서 환기량 실측 실험을 통해 비교한 결과 열수지식을 이용한 환기전열량 예측은 비교적 양호한 결과를 보이는 것으로 나타났다. 이류체 포그시스템의 증발효율은 0.3~0.94의 범위를 보였으며 평균 0.67로 나타났고, 환기율이 증가함에 따라 커지는 것으로 나타났다. 포그냉방을 실시하면서 온실의 환경을 계측하여 열수지식으로 냉방부하를 계산하고, 분무량 실측치로부터 증발 냉각열량을 구하여 비교한 결과 냉방부하 계산치와 실측치는 대체로 유사한 경향을 보이는 것으로 나타났다. 냉방부하가 낮은 경우에는 실측치에 비하여 약간 크게 예측되었고, 냉방부하가 높은 경우에는 실측치보다 작게 예측되었다. 온실의 냉방시스템 설계 시에는 최대냉방부하를 이용하여 냉방설비의 용량을 결정하게 된다. 따라서 냉방부하가 큰 쪽에서 실측치보다 작게 예측되는 부분은 검토가 필요하지만 설비용량 산정시의 안전계수를 고려하면 본 연구에서 제시한 냉방부하 산정방법은 온실의 환경설계에 적용할 수 있는 것으로 판단된다.