• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.400-406
• /
• 1999

In an effort to obtain high efficiency in gas fired absorption chillers, a new working fluid has been developed with thc addition of the component of $LiNO_3$, LiCl and LiI to the conventional solution of $LiBr-H_2O$. The solubility and vapor pressure of the 4 component working fluid developed in this work were measured and compared to the results of $LiBr-H_2O$ solution. It was observed that there exists an optimal mole ratio of the inorganic salts in terms of solubility. The mole ratio of LiBr, $LiNO_3$ and LiCl was found to be around 5:1:1~2 in the $LiBr-LiNO_3-LiCl-H_2O$ mixture, and in the case of $LiBr-LiO_3-Lil-H_2O$ and $LiBr-Lil-LiCl-H_2O$ mixtures, the mole ratio of LiBr, $LiNO_3$ and Lil/ LiBr, LiI and LiCl were found to be around 5:1:1 and 5:1:0.5~1 respectively. The vapor pressure of the 4 component working fluid of the optimal mole ratio was increascd with adding the component of $LiNO_3$, LiCl and LiI except for $LiBr-LiNO_3-LiCl-H_2O$ mixture. The absorption capacity of $LiBr-LiNO_3-LiCl-H_2O$ mixture was obtained higher than that of $LiBr-H_2O$ mixture.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.590-592
• /
• 2010

Li-Mn spinel ($LiMn_2O_4$) is prepared by a hydrothermal process with K-Birnessite ($KMnO_4{\cdot}yH_2O$) as a precursor. The K-Birnessite obtained via a hydrothermal process with potassium permanganate [$KMnO_4$] and urea [$CO(NH_2)_2$] as starting materials are converted to Li-Mn spinel nanoparticles reacting with LiOH. The molar ratio of LiOH/K-Birnessite is adjusted in order to find the effect of the ratio on the structural, morphological and electrochemical performances of the Li-Mn spinel. X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), and thermogravimetry (TG) are used to investigate the crystal structure and morphology of the samples. Galvanostatic charge and discharge are carried out to measure the capacity and rate capability of the Li-Mn spinel. The capacity shows a maximum value of $117\;mAhg^{-1}$ when the molar ratio of LiOH/K-Birnessite is 0.8 and decreases with the increase of the ratio. However the rate capability is improved with the increase of the ratio due to the reduction of the particle size.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.751-756
• /
• 1999

The inhibitory effect of antibiotics on growth of lactobacillus, streptococcus and bifidobacteria was examined to develop the selective media to isolate and enumerate bifidobacteria from the fermented foods containing various lactic bacteria. The growth of lactic bacteria was inhibited seriously but that of bifidobacteria was not inhibited by gentamycin or ripampicin at the concentration of more than $100\;{\mu}g/mL$. However lactic bacteria did not grow in MRS broth containing $50\;{\mu}g/mL$ of ampicillin and the growth inhibition of bifidobacteria occurred. The growth inhibition of bifidobacteria was more severe than lactic bacteria in $100\;{\mu}g/mL$ of fosfomycin. Therefore, the MRS medium containing $80\;{\mu}g/mL$ of neomycin sulfate, $50\;{\mu}g/mL$ of gentamycin, $50\;{\mu}g/mL$ of rifampicin, $15\;{\mu}g/mL$ of nalidixic acid and $3\;{\mu}g/mL$ of lithium chloride was concluded selective for bifidobacteria, but restrictive for the other lactic bacteria present in Kimchi and cheese.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.111-120
• /
• 2016

This is an experimental study to analyze the explosion and fire hazards of mobile phone batteries. Using the lithium-ion batteries currently used on smart phone as the experiment samples, the experiments were conducted by overcharging, internal and external short circuit, and thermal shock with the potential of explosion and fire caused by careless use or abnormal conditions. The experiment results showed that, in the case of overcharging and external short circuit, there was no explosion and fire hazard in the normal operation of the protection circuit module (PCM), but there were big risks when the PCM faulted conditions were assumed. In the case of the experiments by internal short circuit and thermal shock, such risks varied depending on a battery charge state. In other words, it could be verified that there were low risks of explosion and fire in a full discharge state, but there were high risks in a full charge state. These experiment results suggest that to minimize the explosion and fire hazards of mobile phone batteries, an alarm device is necessary when the PCM fault occurs. In addition, a solid battery case should be made and safety equipment, such as a cooling device to avoid high temperature, is needed.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.1
• /
• pp.1-11
• /
• 2004

The hot cell facility for research activities related to the lithium reduction of spent fuel, which is designed to permit safe handling of source materials with radioactivity levels up to 1,385 TBq, is planned to be built. To meet this goal, the facility is designed to keep gamma and neutron radiation lower than the recommended dose-rate in normally occupied areas. The calculations peformed with QAD-CGGP and MCNP-4C are used to evaluate the proposed engineering design concepts that would provide acceptable dose-rates during a normal operation in hot cell facility. The maximum effective gamma dose-rates on the surfaces of the facility at operation area and at service area calculated by QAD-CGGP are estimated to be $2.10{\times}10^{-3}, 2.97{\times}10^{-3} and 1.01{\times}10{-1}$ mSv/h, respectively. And those calculated by MCNP-4C are $1.60{\times}10^{-3}, 2.99{\times}10^{-3} and 7.88{\times}10^{-2}$ mSv/h, respectively, The dose-rates contributed by neutrons are one order of magnitude less than that of gamma sources. Therefore, it is confirmed that the radiological design for hot cell facility satisfies the Korean criterion of 0.01 mSv/h for the operation area and 0.15 mSv/h for the service (maintenance) area.

• Journal of Embryo Transfer
• /
• v.16 no.2
• /
• pp.91-98
• /
• 2001

We evaluated the effects of the substrate and inhibitors related to phosphatidylinositol metabolism on in vitro maturation and fertilization of porcine oocytes. Cumulus-oocyte complexes were cultured in mTLP-PVA medium supplemented with or without inositol (250 mM) fur 46h. Subsequently, these oocytes were inseminated with fresh boar semen in mTALP-PVA medium for 6h. At 6h after insemination, oocytes were cultured for further 12 h in TCM-199 supplemented with 10% FBS (fetal bovine serum). The higher percentage of oocytes in inositol-supplemented medium reached metaphase of the second meiotic division compared to those in control (81.4% vs. 67.3%; P<0.()5). following 18 h of insemination, more number of male pronuclei were formed in the oocytes matured in inositol-supplemented medium than in those of control experiment (42.0% vs. 27.3%; P<0.05). When oocytes were cultured in medium with 10mM LiCl (chloride lithium) or 0.5mM dbcAMP (dibutyryl cyclic adenosine monophosphate) to determine the role of inositol on the maturation of oocytes, these two drugs inhibited the meiotic division of oocytes (P<0.05). However, addition of inositol to the culture medium did overcome the inhibitory effect of these drugs on the oocyte maturation. DbcAMP and verapamil supplemented synergistically arrested the meiotic division of oocytes. Addition of verapamil did not inhibit germinal vesicle breakdown, but it severly inhibited the second meiotic division of oocytes. These results suggest that inositol exert its improving effects on maturation, by activating the PI (phosphatidylinositol) cycle and causing beneficial changes in both cytoplasm and membrane of oocytes.

• Journal of the Korean Society of Radiology
• /
• v.9 no.3
• /
• pp.169-174
• /
• 2015

$LiGd_9(SiO_4)_6O_2:Ce^{3+}$ phosphors were synthesized by solid-state reaction method. The structural characteristic was investigated by X-ray powder diffraction analysis. The emission and excitation spectra of the $Ce^{3+}$ ions doped $LiGd_9(SiO_4)_6O_2$ phosphors were obtained under the UV excitation. The emission spectra of $LiGd_9(SiO_4)_6O_2:Ce^{3+}$ shows the band at 410 nm corresponding to the $^2F_{5/2}$ and $^2F_{7/2}$ states of $Ce^{3+}$. The red shift of $Ce^{3+}$ emission is found as the $Ce^{3+}$ concentration increases, which could be explained by the change in crystal-field symmetry and strength with increasing $Ce^{3+}$ concentration. Fluorescence decay time of $Ce^{3+}$ was about 20 ns. When the concentration of $Ce^{3+}$ increases life time was slightly reduced.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.491-495
• /
• 2005

Vanadium pentoxide xerogels with a doping ratio of $Al/V_2O_5$ ranging from 0.01 to 0.05 were synthesized by doping Al into $V_2O_5$ xerogel via the sol-gel process. By using the synthesized $Al_xV_2O_5$, the $Li/Al_xV_2O_5$ cells were assembled to investigate the chemical and electrochemical properties. Surface morphology of the $Al_xV_2O_5$ xerogel showed an anisotropic corrugated sheet-like matrix, and the interlayer distance was about $11.5{\AA}$. The IR spectra of the $Al_xV_2O_5$ revealed that the doped Al was coordinated to the vanadyl group in $V_2O_5$. The $Al_xV_2O_5$ xerogels showed enhanced reversibility and energy density compared with the $V_2O_5$ xerogel. The specific capacity of the $Al_{0.05}V_2O_5$ xerogel was more than 200 mAh/g at 10 mA/g discharge rate, and cycle efficiency was about 90% after the 31st cycling test between 1.9 V and 3.9 V.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.587-598
• /
• 2005

Statement of problem: Ceramic restorations should be made of porcelain layers of different opacity, shade, and thickness in order to provide a natural appearance. Lithium disilicate glass-ceramic system has superior color reproducibility, because it uses the ceramic ingot which is similar to teeth shade and uses the staining technique and layering technique. However, staining technique has a fault of discoloration. Also, porcelain is divided core and dentin layer, it is not enough to study about the influence of porcelain layer thickness and shade on the shade of ceramic restorations. Purpose: The purpose of this study was to evaluate the influence of porcelain layer thickness and color on the final shade of ceramic restorations. Materials and method: The CIE $L^*a^*b^*$(CIELAB) values of 72 assembled specimens, each consisting of 3 discs (enamel porcelain 0.2 mm/dentin porcelain -1.2, 0.9, 0.7, 0.5 or 0.3 mm/ceramic core -0.3, 0.5, 0.7, 0.9 or 1.2 mm, diameter is 1.0 mm) were evaluated with a spectrophotometer (Model Chromaview 300, Spectron Tech Co, Korea) for the shade A1, A2, A3 and A4. Distilled water (refractive index: 1.7) was used to attain optical contact between the layers. White, white gray, and white brown backgrounds were used to assess the influence of the background on the final shade. And the mean color difference value$({\Delta}E)$ was calculated. Results and conclusion: The results obtained from this study were as follows. 1. There was a significant correlation between the thickness ratio of the ceramic core/dentin porcelain system and $L^*,\;a^*\;and\;b^*$ values when the total thickness of specimen combination was smaller than 1.4 mm(P<0.05). 2. The specimen which the ceramic core thickness was more than 0.7 mm had the best masking effect against background colors. 3. The mean color difference value$({\Delta}E)$ is smaller than 2 $({\Delta}E<2)$ when the ceramic core thickness was larger than 0.7 mm and the total thickness of specimen was more than 1.4 mm.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.52-58
• /
• 2020

Electrochemical characterization and thermal stability were investigated for MgF₂ coated LiNi_0.8Co_0.15Al_0.05O₂ cathode. The ratio of MgF₂ was controlled by 0.5, 1, 3 wt%. Cyclic voltammetry, charge-discharge profiles, rate capability, cycle life were measured for electrochemical properties. DSC analysis was measured for thermal stability. The first discharge capacities of MgF₂ coated LiNi_0.8Co_0.15Al_0.05O₂ were decreased at 0.1C-rate compared to pristine LiNi_0.8Co_0.15Al_0.05O₂. But the rate capability and cycle life of MgF₂ coated LiNi_0.8Co_0.15Al_0.05O₂ were improved at 2C-rate. In DSC analysis result, the exothermic temperature of MgF₂ coated LiNi_0.8Co_0.15Al_0.05O₂ was increased and peak height was decreased.