• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.2
• /
• pp.125-131
• /
• 2018

Ascorbic acid (Vitamin C) has been widely used in skin care formulations. Due to its remarkable effects on anti-oxidation, collagen biosynthesis and whitening, ascorbic acid is considered as an effectible anti-aging active ingredient. But, the instability problems of ascorbic acid in cosmetic formulation such as oxidation, browning and changes in smell is the difficult issue to be overcome for the application of high concentration of ascorbic acid. We tried to stabilize the ascorbic acid in non-aqueous liquid formulation that contains polyol solvent at first. The non-aqueous system was effectible to reduce oxidation. But, ascorbic acid was crystallized in the non-aqueous formulation at the low temperature below $5^{\circ}C$. We tried to develop way to stabilize the ascorbic acid in aqueous solutions to solve the crystallizing problem. In this study, we search the optimal ratio of antioxidant combination, such as zinc sulfate, glutathione and curcuma longa (turmeric) root extract. Formulations were stored at - $16^{\circ}C$, $5^{\circ}C$, $25^{\circ}C$, $40^{\circ}C$, $50^{\circ}C$ and cycle($5-40^{\circ}C$) (in incubator) for a period of eight weeks to investigate their stability. In the stability analysis, the test parameters consisted of color, scent, phase separation and sedimentation. Ascorbic acid stability was checked by HPLC analysis.

• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.437-444
• /
• 2008

Structured lipids(SLs) were synthesized by enzymatic interesterification with DHA-enriched fish oil(containing 27% docosahexaenoic acid) and soybean oil in the hatch-type reactor. The interesterification was performed for 24 hr at $55^{\circ}C$ and TLIM(immobilized lipase from Thermonyces lanuginosa, 10% by weight of total substrates) was mixed with 180 rpm of shaking. The fish oil and soybean oil were interesterifed with several weight ratio(fish oil : soybean oil, 2:8, 3:7, 4:6, 5:5, w:w), Reverse-phase high performance liquid chromatography with an evaporative light-scattering detector separated the triglyceride species of SLs. The products contained the newly synthesized peaks. Especially, one of peaks was distinctively increased with the increasing weight ratio from 2:8 to 5:5 while the peak of trilinolein (LLL) decreased vice versa. The effect of antioxidants such as catechin, BHT(Butylated hydroxytoluene), and their combinations on the oxidative stability in SL were investigated. Oxidative stability was carried out under oven test at $60^{\circ}C$ over 72 hr thereafter SLs were analyzed for total fatty acid content, rancimat, peroxide value, electronic nose and TBARS value. Among all combinations of antioxidant, the highest stability was obtained from 200 ppm of catechin. Besides, total tocopherol ($\alpha$, $\gamma$, and $\delta$-tocopherol), iodine and saponification value were analyzed in which iodine and saponification value of SLs were 151.19 and 182.35.

• Proceedings of the Ginseng society Conference
• /
• 1988.08a
• /
• pp.122-128
• /
• 1988

Several major polyacetylene compounds were isolated from the petroleum-ether fraction of fresh Korean ginseng roots through solvent fractionation. partition and silica gel column chromatography. Further separation of acetylenic compounds was accomplished by bonded normal phase HPLC utilizing a moderately nonpolar microparticulate column. The preparative separation for the various spectral measurements was carried out by low pressure preparative liquid chromatography. The chemical structure of these polyacetylenes separated was determined by UV. IR/FTIR. $^{1}H$ NMR. mass spectral and elemental analysis. These are identified to be heptadeca-1-en-4.6-diyn-3.9.l0.-triol [1] heptadeca-1.9-dien-4.6-diyn-3-ol. heptadeca-1.8-dien-4.6-diyn-3.10-diol and the 4th was denatured polyacetylene. heptadeca-1.4-dien-6.8-diyn-3.10-diol. Two different p-substituted benzoates of panaxynol were synthesized for the determination of exciton chirality. The circular dichroism spectra in the UV region show that panaxynol p-bromobenzoate and p-dimethyl-aminobenzoate constitute negative exciton chirality [2]. Isolated major polyacetylene compounds were irradiated in aerated solution with 300 nm UV light to obtain the oxidized product at the allylic alcohol center to corresponding carbonyl compounds such as heptadeca-1-en-4.6-diyn-9.10-diol-3-one and heptadeca-1.9-dien-4.6-diyn-3-one. These photooxidation compounds have en-on-diyne chromophore and undergo nucleophilic addition reaction with methanol to yield ${\beta}-methoxy$ carbonyl compounds such as heptadeca-9-en-4.6-diyn-1-methoxy-3-one and heptadeca-4.6-diyn-1-methoxy-9.10-diol-3-one.

• YAKHAK HOEJI
• /
• v.51 no.2
• /
• pp.133-139
• /
• 2007

A simple and sensitive HPLC-MS method for quantitation of 10${\alpha}$-methoxy-9,10-dihydrolysergol (MDL), the main metabolite of nicergoline, in human plasma was developed and the bioavailability parameters of MDL was assessed in Korean healthy male volunteers. Clomipramine was used as an internal standard. MDL and internal standard in plasma sample were extracted using ethyl acetate. A centrifuged upper layer was then evaporated and reconstituted with mobile phase of 10 mM ammonium acetate-acetonitrile (10 : 90, v/v). The reconstituted samples were injected into a Zorbax SB-C8 column (2.1${\times}$150 mm,5 ${\mu}$m) at a flow-rate of 0.3 ml/min. Using MS with selected ion monitoring (SIM) mode, MDL and clomipramine were detected without severe interference from human plasma matrix. MDL produced a protonated molecular ion ([M+H]$^+$) at m/z 287. Internal standard produced a protonated molecular ion ([M+H]$^+$) at m/z 315. A linear relationship for MDL was found in the range of 2.5${\sim}$100 ng/ml. The lower limit of quantitation (LLOQ) was 2.5 ng/ml with acceptable precision and accuracy. The intra- and inter-day validation for all coefficients of variation (R.S.D.%) were found less than 15%. Main pharmacokinetic parameters of 30 mg of nicergoline were revealed as follows: AUC$_t$ 321.1${\pm}$64.5 ng${\cdot}$hr/ml, C$_{max}$, 51.2${\pm}$25.3 ng/ml, T$_{max}$ 3.6${\pm}$1.5 hr, K$_{el}$ 0.12${\pm}$0.07 hr$^{-1}$ and t$_{1/2}$ 7.6${\pm}$3.4 hr. Inter subject variations and race differences were shown in comparison with the published data in the literature.

• KSBB Journal
• /
• v.22 no.6
• /
• pp.414-420
• /
• 2007

Nanomaterials have been applied to various fields due to their advantageous characteristics such as high surface area, rapid diffusion, high specific surface areas, reactivity in liquid or gas phase, and a size close to biomacromolecules. Up to date, increased manufacturing and frequently use of the materials, however, revoke people's concerns on their hazard impact including toxicity the materials. Many research groups have carried out different protocols to evaluate toxic effects of nanomaterilas on different organisms, and consequently, nanomaterials are known to cytotoxicity. In this paper, we reviewed some of the most reports on toxic effects of several nanoparticles specifically on bacteria. There are numbers of reports focused on antibacterial effect of nanoparticles based on bacterial cell viability. Therefore, the application of each nanomaterial should be concerned with its toxicity and its toxic effect should be evaluated in terms of concentrations and sizes of the nanomaterials used, prior to use of a nanomaterial.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.258-263
• /
• 2007

Ammonia water was investigated as a new absorbent of the chemical absorption process for the removal of $CO_2$ in flue gas. The suitable range of ammonia water concentration and $CO_2$ loading ($mol\;CO_2/mol\;NH_3$) were decided in the point of view of $CO_2$ absorption capacity and $NH_4HCO_3$ precipitation. The absorption capacity of $CO_2$ and the precipitation of $NH_4HCO_3$ in liquid phase were calculated by the Pitzer model for electrolyte solution. The $CO_2$ absorption capacity of the ammonia water over $5\;molNH_3/kgH_2O$ was higher than that of conventional amine absorbent. The $CO_2$ loadings where precipitation occurred were decided at various absorbent concentrations. Theses values were higher than 0.5 in the concentration range of $5-14\;molNH_3/kgH_2O$ at 293, 313 K. The absorber for the removal of $CO_2$ in flue gas could be operated without $NH_4HCO_3$ precipitation by using high concentration of ammonia water below these $CO_2$ loading values. The optimum temperature of the ammonia water absorbent for removal of $CO_2$ in flue gas was 297-312 K depending on the concentration of ammonia water.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.358-363
• /
• 2013

Lithium-ammonia (Li-$NH_3$) solutions are possible to be successfully made under the vacuum condition but there still remains a problem of undergoing stable and reliable decomposition in vacuum for high-efficiency thermoelectric power generation. This paper describes a new method for improving the thermoelectric conversion efficiency of Li-$NH_3$ solutions in vacuum. The proposed method uses a 'U'-shaped Pyrex vacuum tube for the preparation and decomposition of pure fluid Li-$NH_3$ solutions. The tube is shaped so that a gas passageway ('U') connecting both legs of the 'U' helps to balance pressure inside both ends of the tube (due to $NH_3$ gasification) during decomposition on the hot side. Thermoelectric experimental results show that solution reaction in the 'U'-shaped tube proceeds more stably and efficiently than in the 'U'-shaped tube, and consequently, thermoelectric conversion efficiency is improved. It is also proved that the proposed method can provide a reversible reaction, which can rotate between synthesis and decomposition in the tube, for deriving the long-time, high-efficiency thermoelectric power.

• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.7-10
• /
• 2009

An analytical method for the determination of flumequine in meats was developed and validated using high-performance liquid chromatography with fluorescence detection. The samples were mixed with sodium sulfate and extracted with ethyl acetate. After clean-up, the residues were dissolved in mobile phase. The calibration curves showed high linearity ($r^2$=0.9979) within the concentration range of 0.1-1.0 mg/kg. The limit of detection and limit of quantification were validated at 0.005 and 0.017 mg/kg, respectively. The recoveries in fortified meats ranged from 90.8 to 101.1%. The method was then validated in correspondence with the CODEX guidelines for flumequine residue in meats. Herein we monitored 150 samples of meats that were purchased in Korea (Seoul, Busan, Daegu, Daejeon, and Gwangju). Among the tested samples, flumequine was detected in 1 of beef and 1 of pork at levels in the range of 0.048-0.080 mg/kg. Overall, the flumequine residues in the tested samples were within the Maximun residue limit.

• Journal of the Korean Institute of Gas
• /
• v.19 no.4
• /
• pp.1-7
• /
• 2015

As the interest on the air pollution is gradually rising up at home and abroad, automotive and fuel researchers have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward various main issues : whether PM emissions should be regulated for diesel and gasoline vehicles and whether gasoline and LPG powered vehicles can be further neglected from PM emission inventories. Finally, the greenhouse gas regulation has been discussed including automotive emission regulation. The greenhouse gas and emissions of automotive had many problem that cause of ambient pollution, health effects. Based on various test modes and ambient conditions, this paper discusses the characteristics of LPG on exhaust emissions and greenhouse gases. Also, this paper assessed emission characteristics due to the test temperature. These test temperature were performed by dividing the temperature of the test mode and the lowest local temperature in winter. Through this study, the correlation of vehicle test mode and ambient condition, exhaust emission, greenhouse gas emission was analyzed.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.12
• /
• pp.1665-1672
• /
• 2012

An 80% ethanol extract of Hizikia fusiforme was obtained and followed by successive fractionation using the organic solvents n-hexane, ethyl acetate, and n-butanol to identify the antioxidative substance. The aqueous part of the nbutanol fractionation step, showing high antioxidative activity, was subjected to reverse-phase liquid chromatography. As a result, a substance purified from a BB-2 fraction showed high antioxidative activity. The m/z 419 [M+H] molecular ion peak in the fraction was observed by the analysis of the ESI-LC/MS spectrum. By the analysis of 1H NMR (500 MHz, DMSO-$d_6$) and $^{13}C$ NMR (125 MHz, DMSO-$d_6$) spectra, a unique compound of the fraction was biochemically identified as a 5-hydroxy-3,6,7,8,3',4'-hexamethoxyflavone (5HHMF). We also investigated the effect of 5HHMF on human gastric AGS carcinoma cells. Western blot analysis suggested that the flavone substantially increased the levels of the death receptor-associated apoptosis mediators Fas, Fas L, FADD, TRADD, and DR4 in a concentration-dependent manner. The levels of Fas, Fas L, TRADD, and DR4 in the cells treated with 5HHMF ($5{\mu}g/ml$) were approximately 26.4-, 12.8-, 6.7-, and 9.8-times higher than those of non-treated cells, respectively. Of note, the level of FADD protein in the cells exposed to 5HHMF ($1{\mu}g/ml$) increased approximately 9.6-times. In addition, the cleavage of caspase-3, -8, and -9 in cultured AGS cells treated with 5HHMF was significantly confirmed. Therefore, our results suggest that 5HHMF from H. fusiforme is involved in the induction of death receptor-associated apoptosis mediators in human gastric AGS carcinoma cells.