• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.8
• /
• pp.866-870
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The NLC pretilt angles on thin plastic substrates generated higher than that on glass substrate. Also, EO characteristics of the TN-LCD with a rubbed PI surface based on polymer substrate are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on g1ass.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05a
• /
• pp.146-149
• /
• 2004

We have studied a liquid crystal (LC) mode (named locked super homeotropic (LSH)) in which the LCs aligned homeotropically are locked by surrounding walls such as cubic, hexagonal and cylinder. In the device, the vertically aligned LCs tilt down symmetrically around the center of the cell when a voltage is applied and thus it exhibits wide viewing angle. The structure of this LSH mode is suitable for large-sized display panels. since the LCs are locked in micro domains the LCs do not flow to the bottom of the panel by gravity. This mode is applicable to achieve high performance TFT-LCD TV because of high performance characteristics such as high contrast, high brightness, wide-viewing angle.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.9
• /
• pp.770-775
• /
• 2000

A new photo-polymer material of the copoly (PM4Ch-ChMA), copoly (poly (4-methacryloyloxy)chalcone-cholesteryl methacrylate) for homeotropic alignment was synthesized and the electro-optical (EO) performance for the photo-aligned vertical-aligned (VA)-LC display (LCD) was studied. Good thermal stabilities of synthesized copolymer were obtained by TGA(Thermogravimetric Analysis) measurement. Good voltage-transmittance (V-T) and response time characteristics for the photo-aligned VA-LCD with polarized UV exposure in oblique direction($\theta$$_{i}$=30$^{\circ}$) on a copolymer-1 (2%) surfaces for 1 min were observed. but, light leakage in the off-state was observed. Therefore, we achieved excellent V-T and response time characteristics for the photo-aligned VA-LCD with UV exposure on a copolymer-3 (30%) surfaces for 3 min.n.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.390-391
• /
• 2007

We have studied improvement of light leakage of twisted nematic liquid crystal display (TN-LCD) in dark state using the hybrid aligned compensation film made of rod-like LC. When the voltage is applied properly to the TN-LCD, the director tilts up but LC director on the substrate don't tilts up due to surface anchoring energy of the LC cell. Accordingly, LC director from surface to middle LC of TN -LCD become hybrid state such as hybrid aligned film. Consequently, in this paper we achieve wide viewing angle performances of TN mode using developed hybrid aligned film which especially decreases light leakage at vertical direction in dark state.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1121-1124
• /
• 2004

Carbon Nitride exhibits high electrical resistivity and thermal conductivity that are similar to the properties shown by diamond-like carbon (DLC) films. These diamond-like transport properties in Carbon Nitride come in a material consisting of $sp^2$-bonded carbon versus the $sp^3$-carbon of DLC. The diamond-like properties and nondiamond-like bonding make NDLC an attractive candidate for applications. Liquid crystal (LC) alignment capabilities with ion beam exposure on carbon nitride thin films and Electro-Optical (EO) performances of the ion-beam aligned twisted nematic liquid crystal display (TN-LCD) with oblique ion beam exposure on the Carbon Nitride thin film surface were studied. An excellent uniform alignment of the nematic liquid crystal (NLC) alignment with the ion beam exposure on the Carbon Nitride thin films was observed. In addition, the good EO properties of the ion-beam-aligned TN-LCD were achieved. Finally, we achieved the residual DC property of the ion-beam- aligned TN-LCD on the Carbon Nitride thin film.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.471-474
• /
• 2002

Three-ring types liquid crystalline compounds having fluoro and isothiocyanate substituent were synthesized and their physical and electro-optical properties were measured to evaluate the applications to active matrix VA liquid crystal displays. The tetrakis(triphenylphosphine)palladium(0) catalyzed cross coupling of aryl boronic acids with aryl halides is used to prepare trans-4'-Alkoxy-2,3-difluoro-3'-isothiocyanato-4-(4-alkylcyclohexyl}-biphenyl series. The synthesized compounds showed the nematic liquid crystalline phase and the negative dielectric anisotropy. The prepared mixtures showed faster response time and lower threshold voltage than their host mixture.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.783-787
• /
• 2014

This paper presents an improved vertical alignment nematic liquid crystal mode characterized by the protrusions or slits of the top substrate and additional stripe type common electrodes with polarity switching of the bottom substrate to improve multi-domain vertically aligned (MVA) and patterned vertically aligned (PVA) nematic modes. MVA and PVA modes have disadvantages such as an LC disclination in the vicinity of the middle region of electrodes between the top and bottom protrusions in MVA mode or the top and bottom slits in PVA mode. Therefore, the stripe type common electrode generating a horizontal electric field and the protrusion or slit producing some pretilt of liquid crystals (LCs) were used to improve the LC disclination, which influences the transmittance and response speed. The simulation results showed that the proposed VA mode has higher transmittance than the MVA and PVA modes. As a result, the proposed VA mode can improve the response speed and transmittance remarkably, which makes it useful for upgrading the LCD display quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2038-2047
• /
• 2011

This paper presents a framework for production planning for a Slim MES(Manufacturing Execution System) of module operations in TFT-LCD(Thin Film Transistor-Liquid Crystal Display) production lines. There are differences in the line configurations and functions among the module operations in the TFT-LCD production systems. This paper presents the framework for the customized MES reflecting these differences. First, a production process is figured out through the analysis of the TFT-LCD module operations. Next, a mathematical modeling is presented reflecting the constraints of shop floors and an optimal schedule is presented through a case example. And a scheduling process using the dispatching rules reflecting the status of shop floors is presented and the performances are measured and compared. Finally, a design process for the Slim MES framework is presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.92-102
• /
• 2003

To detect electrical faults of a TFT (Thin Film Transistor) panel for the LCD (Liquid Crystal Display), techniques of converting electric field to an image are used One of them is the PDLC (polymer-dispersed liquid crystal) modulator which changes light transmittance under electric field. The advantage of PDLC modulator in the electric field detection is that it can be used without physically contacting the TFT panel surface. Specific pattern signals are applied to the data and gate electrodes of the panel to charge the pixel electrodes and the image sensor detects the change of transmittance of PDLC positioned in proximity distance above the pixel electrodes. The image represents the status of electric field reflected on the PDLC so that the characteristic of the PDLC itself plays an important role to accurately quantify the defects of TFT panel. In this paper, the image of the PDLC modulator caused by the change of electric field of the pixel electrodes on the TFT panel is acquired and how the characteristics of PDLC reflect the change of electric field to the image is analyzed. When the holding time of PDLC is short, better contrast of electric field image can be obtained by changing the instance of applying the driving voltage to the PDLC.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1519-1522
• /
• 2009

We describe a 32" liquid-crystal display (LCD) with multi-touch sensing capability by integrating IR detector arrays onto the LED backlight plate. A transparent light guide is placed in front of the display screen, with IR LEDs disposed at its edges and emitting IR light into the light guide, the light is trapped by total internal reflection within the light guide to be as touch-sensing light. A physical contact with the acrylic plate surface will stimulate some trapped light to be escaped from the light guide and pass through LCD panel to be detected by the IR detectors. The touch-sensing LCD with this configuration can locate simultaneous multiple touche points on the touchable surface.