• 제목/요약/키워드: liquid waste

검색결과 581건 처리시간 0.03초

고온 고압 조건에서의 난분해성 액상폐기물 분해 특성 (Decomposition Characteristics of Non-Degradable Liquid Waste under High Temperature and High Pressure Conditions)

  • 이강우;손병현
    • 한국산학기술학회논문지
    • /
    • 제8권6호
    • /
    • pp.1572-1578
    • /
    • 2007
  • 지정폐기물은 폐산, 폐알칼리, 폐유, 폐유기용제, 폐합성수지, 먼지, 슬러지, 감염성폐기물 등이며, 이 중에서 많은 부분이 폐산, 폐알칼리, 폐유, 폐유기용제, 폐합성수지 등 액상지정폐기물이다. 이와 같은 액상지정폐기물을 적절히 분해하기 위해 먼저 액상지정폐기물에 대하여 밀도, 삼성분, 원소분석, 발열량 등 물리화학적 특성을 분석하고 0.3톤/일급의 고온고압시스템을 설계하였으며, 반응온도는 $1,200^{\circ}C$ 이상, 압력은 최대 4 $kg_f/cm^2(g)$ 조건에서 실험을 수행하였다. 폐유의 평균 밀도값은 0.93 g/mL. 폐유기용제는 0.93 g/mL, 폐합성수지는 0.91 g/mL이었으며, 삼성분과 원소분석 결과 폐유기용제는 수분 54.34%, 회분 3.35%, 가연분 42.31%이었고, 탄소 29.73%, 수소 3.82%, 산소 5.94%, 질소 2.31%, 황 0.51%이었다. 폐유의 평균 저위발열량은 8,294 kcal/kg, 폐유기용제의 경우 7,462 kcal/kg, 그리고 례합성수지는 5,809 kcal/kg으로 나타났다. 액상례기물 중 유해물질의 분해 특성을 보기 위해 대상 폐기물에 혼합한 톨루엔, TCE 그리고 톨루엔이 고온에서 분해될 때 발생하는 벤젠 3가지 물질에 대해 고온 고압 처리 전후의 양으로 각물질의 DRE를 비교한 결과, 상압조건에서 벤젠 99.73%, 톨루엔 99.73%, TCE가 99.95% 이었으며 가압조건에서 벤젠99.97%, 톨루엔 99.82%, TCE가 99.99%으로 나타나 가압조건이 상압조건보다 유해물질의 분해율이 향상된 결과를 보였다. 본 실험결과 TCE/톨루엔 혼합물의 DRE는 99.73% 이상으로 매우 높게 나타나 유해물질이 적절히 분해됨을 확인할 수 있었다.nes., CWT+35‰+Anes., NWT+15‰+Anes. 및 CWT+15‰+Anes.의 8개 실험구를 2반복으로 설정하여 경북울진∼부산까지 약 400 km (6시간)를 차량수송하였다. 수송용기는 스티로폼상자(66×42×20 cnn)로서, 여기에 해수 3 L와 액화산소를 넣은 비닐봉지에 넙치 8마리씩 수용하여 수송하였다. 혈액의 성상 및 분석항목은 수송전ㆍ후에 채혈하여 비교하였다. 수송전 hematocrit는 22.2±3.8%에서 수송후 NWT+35‰에서 15.3+3.9%, CWT+35‰은 16.7±3.0%, NWT+15‰구에서는 19.2±1.8%로 낮아졌으며, CWT+15‰구는 20.9±3.6%로 수송전과 차이가 없었다. 한편 NWT+15‰+Anes.구는 17.8±0.9%, CWT+15‰+Anes.구는 14.5±1.5%로 낮아졌다. Cortisol은 수송전 2.4±0.1 ng/ml로부터 CWT+35‰구는 16.7±12.8 ng/ml, NWT+35‰구는 47.9+19.8 ng/ml, NWT+15‰구는 43.5±13.9 ng/ml, CWT+15‰구는 26.1±8.3 ng/ml, NWT+15‰+Anes.구는 61.7±3.3 ng/ml, CWT+15‰+Anes.구는 86.1±19.0 ng/ml로 높아졌다. Glucose는 수송전 74.2±32.6 mg/dl로부터 NWT+35‰구는 197.9±27.5 mg/dl, CWT+35‰구도 272.1±29.9 mg/dl로 유의하게 높아졌다. Na/sup +/의 수송전 농도는 163.5±0.6 mEq/L로부터 NWT+35‰구와 CWT+35‰구는 각각 175.3±1.2 mEq/L, 190.0±5.0 mEq/L로 높아졌으며, 다른 실험구에서는 차이가 없었다. 본 연구 결과, cortisol과 glucose에서 수송전보다는 모든 실험구에서 높게

  • PDF

Characterisation of Some Silica Samples Modified with Aluminium by Inverse Liquid Chromatography using Squalene as Probe - Part IV

  • Zhang Zhentao;Balard Henri;Donnet J. B.
    • 한국방사성폐기물학회:학술대회논문집
    • /
    • 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
    • /
    • pp.107-116
    • /
    • 2005
  • Precipitated silicas modified by aluminium were characterised using inverse liquid chromatography in anhydrous heptane with squalene as probes. Their monolayer capacities of adsorption, Langmuir's and Henry's constants were determined from the desorption isotherms according to frontal analysis. A narrow band consisting of isotherms was observed. The introduction of aluminium has little influence on the monolayer capacity, Langmuir's constants and the Henry constant. Experimental data show that neither the amounts of aluminium on the silica nor the methods of the introduction of aluminium into the silica influence the interactions between the squalene and the silicas.

  • PDF

Effective removal of non-radioactive and radioactive cesium from wastewater generated by washing treatment of contaminated steel ash

  • P. Sopapan;U. Lamdab;T. Akharawutchayanon;S. Issarapanacheewin;K. Yubonmhat;W. Silpradit;W. Katekaew;N. Prasertchiewchan
    • Nuclear Engineering and Technology
    • /
    • 제55권2호
    • /
    • pp.516-522
    • /
    • 2023
  • The co-precipitation process plays a key role in the decontamination of radionuclides from low and intermediate levels of liquid waste. For that reason, the removal of Cs ions from waste solution by the co-precipitation method was carried out. A simulated liquid waste (133Cs) was prepared from a 0.1 M CsCl solution, while wastewater generated by washing steel ash served as a representative of radioactive cesium solution (137Cs). By co-precipitation, potassium ferrocyanide was applied for the adsorption of Cs ions, while nickel nitrate and iron sulfate were selected for supporting the precipitation. The amount of residual Cs ions in the CsCl solution after precipitation and filtration was determined by ICP-OES, while the radioactivity of 137Cs was measured using a gamma-ray spectrometer. After cesium removal, the amount of cesium appearing in both XRD and SEM-EDS was analyzed. The removal efficiency of 133Cs was 60.21% and 51.86% for nickel nitrate and iron sulfate, respectively. For the ash-washing solution, the removal efficiency of 137Cs was revealed to be more than 99.91% by both chemical agents. This implied that the co-precipitation process is an excellent strategy for the effective removal of radioactive cesium in waste solution treatment.

플라즈마를 이용한 액상 폐기물 처리 전원장치 개발 및 분해 기술 개발 (Development of power system and degradation technology using arc plasma for the degradation of non degradable waste water)

  • 한철우;김준성;박상훈;황리호;이병호;강덕원;김진길
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 C
    • /
    • pp.1900-1902
    • /
    • 2004
  • The degradation systems of non degradable waste water consist of the arc plasma torch, power supply, a feeder of liquid waste and reactors. Output of stable plasma torch, suitable air flux, microscopic atomizing state of waste water and long reaction section must be to degrade waste water more efficiently. In this paper, we are designed the stable power system, the microscopic atomizing state of waste water and the efficient reactors to satisfy various conditions. Non degradable wast water used in this work was $Na_2$EDTA of 1.0 mol. The concentration of $CO_2$ and EDTA was analyzed using GC (Gas Chromatography) and HPLC (High Performance Liquid Chromatography). In the result show that $CO_2$ concentration was about 96% and EDTA was degraded approximately 96%.

  • PDF

폐유 및 액상연료 공정 폐기물에서 무기물질류의 함량특성 (Characteristics of hazardous oil & liquid fuel waste discharged from various industries)

  • 신선경;정성경;김우일;전태완;강영렬;연진모;조윤아;김민선
    • 분석과학
    • /
    • 제26권4호
    • /
    • pp.276-286
    • /
    • 2013
  • 국내 유해폐기물의 적정 관리를 위해 폐유 및 액상연료 공정에서 발생한 폐기물 중 규제 무기물질류의 배출특성을 조사하였다. 사업장은 올바로시스템에 등록된 폐기물 배출업체를 대상으로, 유럽폐기물 분류체계(EWC, European Waste Catalogue)의 폐유 및 액상연료 공정(EWC 13)과 유사한 폐기물 발생업체를 선정하였다. 조사대상 사업장 37 개 업체를 현지 방문하여 원료, 생산제품, 생산 공정, 폐기물의 종류 및 배출과정을 조사하고 생산 공정에서 배출되는 51 개의 폐기물을 채취하여 무기물질류 16 항목(Cd, Pb, Cu, Hg, As, CN, Cr, $Cr^{6+}$, Ba, Be, F, Ni, Sb, Se, V, Zn)에 대한 함량분석을 수행하였다. 분석결과, 모든 공정에서 발생된 폐기물에서 주로 Sb가 검출되었고, 6~419(평균 98) mg/kg의 농도 범위를 나타내었다. EWC 판정 절차를 통해 국내 폐유 및 액상연료 공정에서 발생된 폐기물을 판정한 결과, EWC 중분류 24공정 중 절대유해폐기물로 분류해서 관리해야할 공정은 16 개, 상대유해폐기물로 관리가 필요한 공정은 8 개로 판단되었다. 폐기물의 배출특성을 통해 유해물질 함유 자료를 확보하고 폐기물 목록에 대한 데이터베이스를 구축함으로써 유해폐기물의 안전처리를 통한 환경오염을 방지할 수 있을 것으로 기대된다.