• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1286-1289
• /
• 2008

We report on a wide-viewing liquid crystal (LC) display with bi-level microstructures spontaneously formed by selective wetting on a chemically heterogeneous surface. The bi-level microstructures serve as spacers for maintaining uniform cell gap, as well as protrusions for wide-viewing properties. Our LC cell having the bi-level microstructures shows good electro-optic properties.

• Smart Structures and Systems
• /
• 제33권6호
• /
• pp.415-430
• /
• 2024

To control vertical and lateral compound vibration simultaneously using an integrated smart controller, passive tuned mass damper (TMD) and tuned liquid damper (TLD) are updated and combined to an adaptive-passive TMD-TLD (AP-TMD-TLD) system. As for the vertical AP-TMD part on top of the vertical spring, it can retune itself through varying the level of liquid in the tank to adjust its mass, while the lateral AP-TLD part at the bottom of the vertical spring can retune itself by changing the level of liquid. Further, for multimodal response control, the multiple AP-TMD-TLD (MAP-TMD-TLD) system is proposed as well. Each AP-TMD-TLD in the system can identify the structural vertical and lateral modal frequencies through the wavelet-transform (WT) based algorithm and retune its vertical and lateral natural frequencies both through adjusting the level of liquid in the AP-TMD and AP-TLD parts respectively. A cantilever cable-stayed landscape bridge which is sensitive to both human-induced and wind-induced vibrations is presented as a case study. For comparison, initial parameters of MAP-TMD-TLD are mistuned. Results show that the presented system can retune its vertical and lateral frequencies precisely, while the retuned system has a better bi-directional compound control effect than the mistuned system before the retuning operation and can improve the serviceability significantly.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권8호
• /
• pp.1024-1029
• /
• 2012

DME는 천연가스로부터 합성할 수 있는 대량의 미래 에너지원으로 한국가스공사는 이의 국내 공급을 위해 해외 자원 확보와 함께 해양에서 생산과 저장을 할 수 있는 FPSO의 건조를 추진하고 있다. 본 논문은 저장탱크 내부에서의 DME의 거동을 분석하여 제시함으로써 관련 기술자의 설계나 DME운영에 도움이 되고자 하였다. DME 증발량과 압력변화의 해석결과는 DME탱크 내 액체의 저장량이 증가할수록 증가하였다. 만선인 98%의 충전에서는 저장압력이 급격히 상승하게 되므로 하루 이상 장기간 저장하여야 할 경우는 만선저장을 피하는 것이 바람직하다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1073-1078
• /
• 2003

This paper presents the vibration characteristics of a cantilever beam in contact with a fluid using a PZT actuator and PVDF film. dynamic behaviors of a flexible beam-water interaction system are examined. The effect of the liquid level on free vibration of the composite beam in a partially liquid-filled circular cylinder is investigated. The coupled system is subject to an undisturbed boundary condition un the fluid domain. In the vibration analysis of a wetted beam. the decoupled analyses between beam and fluid have been conventionally employed by considering first the composite beam vibration in the all and secondly Performing the correction taking account for surrounding fluid effects. That is, this investigation was to look at how natural frequencies, mode shapes. and damping are affected by liquid level variations. The signals from the sensor according to the applied input voltage are digitalized and filtered in order to obtain the dynamic characteristics of the composite beam in contact with fluid. It was found that the coupled natural frequencies decreased with the fluid level for the identical composite beam due to added mass effect. In case of the free-free boundary condition, the natural frequency gently decreased at fluid water level between 20% and 80% in the first tending mode and we found out the bends of stair shape for added mass effect of the fluid.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1891-1896
• /
• 2003

The bubble motion during nucleate boiling in a microchannel is investigated numerically. The liquid-vapor interface is tracked by a level set method which is modified to include the effects of phase change at the interface and contact angle at the wall. The computations are made for various channel sizes, liquid flow rates, and contact angles. Based on the numerical results, the bubble growth pattern and its effect on the flow and heat transfer are discussed.

• 한국축산시설환경학회지
• /
• 제6권1호
• /
• pp.53-58
• /
• 2000

본 시험은 양축농가에서 환경오염으로 문제시되고 있는 우분뇨 액상구비를 혼파초지에 환원시 유거수내 BOD, COD 특성과 토양내 화학적 변화를 구명코자 축산기술연구소에서 무비구, 금비단용구, 우분뇨액비구(40, 60, 80톤/ha)를 두어 난괴법 5처리 3반복으로 시험한 결과는 다음과 같다. 무비구에서 유거수량이 1,469.4mm로 가장 많았으나 분뇨액비 60톤구에서는 1,278.1mm로 가장 적었다. 유거수내 BOD는 무비구에서 $19.84m{\ell}/{\;}{\ell}$로 가장 낮았으나 우분뇨 액비 수준이 증가함에 따라 높아지는 경향이었으며, 우분뇨액비 80톤구에서 $36.22m{\ell}/{\;}{\ell}$로 가장 높았다. 유거수내 CDO는 무비구에서 $21.28m{\ell}/{\;}{\ell}$로 가장 낮았으나 우분뇨 액비수준이 증가함에 따라 높아지는 경향이었으며, 우분뇨액비 80톤구에서 $37.51m{\ell}/{\;}{\ell}$로 가장 높았다. 토양의 화학성분중 유효인산 함량과 T-N은 금비구보다 우분뇨 액비 시용구에서 높게 나타났으나 우분뇨액비 수준간에는 차이가 적었다.

• 한국분무공학회지
• /
• 제3권4호
• /
• pp.1-7
• /
• 1998

The measurement of breakup length of viscous liquid jet in stagnant air was conducted by a 3CCD digital video camera. The nozzle diameters of 4, 6, 8mm with L/d=50 were selected and the dynamic viscosity of viscous liquid made of glycerine and water was in the range of $1.061\times10^{-6}m^2/s$ to $4.935\times10^{-5}m^2/s$. The critical velocity is decreased and the breakup length is increased with the increase of nozzle diameter at the same dynamic viscosity of liquid. At the same nozzle diameter, the breakup length and the critical velocity are both increased with the increase of dynamic viscosity of liquid. It is found in the theoretical analysis that the initial disturbance level is the main cause of occurrance of critical Reynolds number in the stability curve. The comparison of experimental critical Reynolds number and the empirical correlation by Tanasawa and Toyota reveals the relatively good agreement.

• Structural Engineering and Mechanics
• /
• 제77권3호
• /
• pp.369-381
• /
• 2021

The seismic responses of elevated tanks considering liquid-structure interaction are presented under horizontal earthquake. The scaled model tank is fabricated to study the dynamic responses of anchored tank and newly designed uplift tank with replaced dampers. The natural frequencies for structural mode are obtained by modal analysis. The dynamic responses of tanks are completed by finite element method, which are compared with the results from experiment. The displacement parallel and perpendicular to the excitation direction are both gained as well as structural acceleration. The strain of tank walls and the axial strain of columns are also obtained afterwards. The seismic responses of liquid storage tank can be calculated by the finite element model effectively and the results match well with the one measured by experiment. The aim is to provide a new type of tank system with vertical constraint relaxed which leads to lower stress level. With the liquid volume increasing, the structural fundamental frequency has a great reduction and the one of uplift tank are even smaller. Compared with anchored tank, the displacement of uplift tank is magnified, the strain for tank walls and columns parallel to excitation direction reduces obviously, while the one perpendicular to earthquake direction increases a lot, but the values are still small. The stress level of new tank seems to be more even due to uplift effect. The new type of tank can realize recoverable function by replacing dampers after earthquake.

• 대한기계학회논문집B
• /
• 제28권8호
• /
• pp.996-1003
• /
• 2004

The bubble motion during nucleate boiling in a microchannel is investigated by numerically solving the equations governing conservation of mass, momentum and energy in the liquid and vapor phases. The liquid-vapor interface is tracked by a level set method which is modified to include the effects of phase change at the interface and contact angle at the wall. Also, the evaporative heat flux from the thin liquid film that forms underneath a growing bubble attached to the wall is incorporated in the analysis. Based on the numerical results, the effects of channel size, contact angle, wall superheat and waiting period on the bubble growth and heat transfer in a microchannel are quantified.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.791-800
• /
• 1993

Liquid feeding of hogs can be controlled by using feed-level-sensors in the troughs. In this way restricted feeding with computer control of the eating time is possible. For this purpose the feed supplied is adjusted according to the eating time of the previously fed portion. With ad libitum feeding the same sensors can provide for a clean trough once a day and thus help to overcome sanitary problems. The effect of the feeding systems on daily intake and performance of hogs are dealt with.