• 건축역사연구
• /
• 제30권3호
• /
• pp.21-31
• /
• 2021

This paper studied the Pingzuo(平坐) platform structure of the two story building covered with one roof during the early period of Tang dynasty, based on wall paintings, stone pagodas, brick buildings and wooden buildings might be influenced by the Tang style. Instead of Chazhuzao(叉柱造), the typical column linkage in the Song, Liao and Jin buildings, it put the boundary column just behind the wall of a bracket set. Otherwise, the column root might be seen from outside, because its bracket set was still using Touxinzao(偸心造) which did not have a lateral arm on it. And its flooring structure was also different from the Song style, it used cantilever beams instead of lateral beams supported by bracket sets.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.335-345
• /
• 2015

이 연구는 한국의 산업간 연계구조변화를 분석하기 위하여 1995-2000 -2005-2009년도 접속불변 산업연관표를 이용하여 산업간 연계구조의 변화를 분석하였다. 분석결과, 첫째, 분석기간 동안 우리나라의 경제규모는 견조한 성장세를 이루어 총 산출액 기준 1995년 1,190조원에서 2009년에는 2,775조원으로 증가하였다. 둘째, 산업의 연계구조에 의한 산업군 형성의 경우 1995년 서비스 전자-중공업-중화학-1차 공공, 2000년 서비스-중화학-중공업 전자-1차 공공, 2005년 서비스-제조업-소비재-1차 공공, 2009년 서비스 전자-제조업-소비재-1차 공공으로 변화되어왔다.

• 한국건축시공학회지
• /
• 제13권4호
• /
• pp.321-332
• /
• 2013

건축물의 생애주기비용은 시행과정 전 단계에서 상호 연관되어 비용이 발생하며 각 단계마다 서로 간에 영향력이 존재한다. 하지만 건축 프로젝트의 각 단계별 CBS가 서로 상이하여 합리적인 공사비를 산정하는데 문제점이 발생한다. 따라서 본 연구에서는 기존에 연구되었던 LCCBS를 바탕으로 건축 프로젝트 각 단계 간에 경계조건을 분석하였다. 또한 분석된 경계조건을 바탕으로 분절요인을 분석하고 이에 따른 연계방안을 모색하였다. 연계방안의 유효성 검증을 위해 실제 건축프로젝트를 바탕으로 사례적용을 실시하였다. 분석결과 누락되는 항목이 97.2%이상을 개선하였고 평균 6시간 빠르게 업무를 수행할 수 있음을 확인할 수 있었다. 향후, LCC 시스템에 적용함으로써 LCC의 효율적인 산정 및 LCC 절감을 계획할 수 있을 것으로 사료다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.123-125
• /
• 2001

Salient pole rotor type single phase SRM(switched reluctance motor) uses the magnetic fluxes of radial and axial direction at the same time. Therefore the output power per unit volumn is very high and shaft length can be shorter than any other types of SRM with same output. Also, It can be manufactured with low cost thanks to simple structure and driving circuit. We already designed and manufactured prototype using the dynamic output equation of general rotating machine but the effect by salient pole structure was not considered. The most optimal design parameters for salient pole rotor type single phase SRM will be selected by comparing and analyzing the results from 3D FEM analysis, experimental values of the torque versus speed characteristics. and the nux linkage of prototype. Results for the former 3D FEM analysis and torque vs. speed characteristics were already obtained. Finally, we will measure the nux linkage of salient pole rotor type single phase SRM.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 1997년도 제12회 동계학술발표회 논문집
• /
• pp.70-88
• /
• 1997

Recently, the interdisciplinary linkage between engineering and social science has received an increasing attention as an emerging education discipline. Due to intrinsic complexity of innovation process and heterogeneity of disciplinary nature, however there exists little, if not no, effort to draw a common framework in terms of educational scope and contents of the new subject. This paper presents a number of criteria and guidelines for building up new educational framework by integrating engineering subject and social science subject. Specifically, three neo-disciplines, technology policy, technology management, and economics of technology are considered since it is postulated that the forementioned disciplines have established academic identity and fundamental structure By nature, this paper is an exploratory and seminal one. It is not the purpose of this paper to provide a concrete table of contents of educational material. Instead, it merely brings up a discussion topic for the wide audience of academic arena, leaving the gradual consensus and convergence as future task.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권2호
• /
• pp.61-68
• /
• 2006

Many researchers have worked for the sensorless control of SynRM in recent years. However they commonly requires large calculations which induced from its complexity. For low cost application as like home appliance, it is difficult to utilize because of the cost problem. Therefore, it is necessary to introduce simplified sensorless control scheme that is composed of least calculation to estimate the rotor position. In this paper the sensorless control is performed using the characteristics of SynRM structure in which the linkage flux varies with rotor position, so the rotor position can be detected by the change of linkage flux. The estimation of linkage flux can be acquired from the integration of the motor terminal voltage which is commonly used method for the reliability of the estimation. However this estimation method has demerits in low speed operation therefore in that region the motor terminal voltage is compensated by the phase current. A digital simulation (MATLAB) and experiment were performed to confirm the adequacy of the proposed control scheme.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2000년도 추계 학술대회(The 2000 Autumn Conference of korea Technology Inovation Society)(한국기술혁신학회)
• /
• pp.109-121
• /
• 2000

In the knowledge based economy, it's important to know the place where the proper knowledge locates as well as to produce the creative knowledge. This paper intends to clear up the linkage structure between research fields and its application areas. 2,135 proposals submitted to Korea Science and Engineering Foundation were analyzed to investigate the relationship between research fields and application areas. The results are as follows; first, 51.8% of the basic research is devoted to the advancement of knowledge, second, 40.8% of that is applicable to the industry, third, 49.9% of engineering and 20.2% of natural science research is applicable to the industry.

• 한국잠사곤충학회지
• /
• 제43권2호
• /
• pp.67-76
• /
• 2001

The "crescent-egg" a new spontaneous mutant was detected in a white egg strain k37. Studies were carried out the linkage analysis, to investigate phenotypic characteristics and biochemical analysis of haemolymph and ovarian protein. The mutant, ore was independent from 20 linkage groups P(2), Ze(3),L(4), oc(5), sn8), Ia(9), w-1(10), K(11), ch(13), U(14), bl(15), cts(16), bts(17), mln(18), nb(19), oh(20),Lan(21), or(22), tub(23) and Xan(27). The fertilization, hatchability and larval growth were not different from the those of normal eggs. The content and composition of yolk protein were similared to normal eggs. Scanning electron microscopy revealed the areal specific structure in dorsal region of egg-shell of cre mutant. Analysis of chorion protein by isoelectrofocusing(IEF), was resolved no difference in the composite of the chorion protein. We conclude that the egg mutant ere is expressed only in the egg-shape formation and region specific determination.

• 한국도서관정보학회지
• /
• 제51권1호
• /
• pp.281-303
• /
• 2020

본 연구는 학교도서관 중심의 독서 전략 범주를 밝혀 독서 전략의 내용 체계를 구안하고, 교과 연계 방안을 모색하는 데 있다. 이를 위하여 고등학교 국어과 교육과정 분석 및 독서 전략 관련 선행 연구의 결과를 토대로 독서 전략의 내용 체계 범주를 텍스트 영역과 인지 전략으로 설정하였다. 여기에 관련 선행 연구의 활동지를 참고해 재구조화한 4개 유형의 독해 기법을 더하여 최종적으로 독서 전략의 내용 체계를 구안하였다. 본 연구의 교과 연계는 교과 교과서를 대상으로 이뤄지며, 학습활동은 탐구 과제 분석의 방법을 통하여 독서전략 적용 방안을 확인하였다. 이에 따라 고등학교 『통합사회』와 『통합과학』의 학습활동을 대상으로 그래픽 조직자를 활용한 독해 전략을 적용해 그 타당성을 검증하였다. 그 결과 독서 전략의 내용 체계를 활용한 교과 연계 방안은 교과 학습활동에 다양한 읽을 자료 제공을 통해 교과 수업을 심화하고, 독립된 독서 프로그램으로 확장해 학습내용을 익힐 수 있는 활동을 제안하였다.

• 대한안전경영과학회지
• /
• 제15권3호
• /
• pp.151-161
• /
• 2013

This paper proposes a strategic model of linkage between productivity metrics and financial accounting metrics to properly evaluate the financial effect of TPM activities and the business performance. This linkage strategy provides a connection tool for clear communication between factory-level and headquarters that the metrics proposed by this paper ultimately improves a quality of support from the management by receiving the factors required for productivity activities in the practical field. This factor includes such as equipment, raw materials and labors. Here, we propose that chain reaction models using break down structure of productivity metrics and financial metrics enhance the knowledge sharing of KPI (Key Performance Indicator) which generally tend to create oversimplified communication between management in headquarters and employees in the practical fields. The productivity metrics include OEE(Overall Equipment Effectiveness) of TPM (Total Productive Maintenance), OLE (Overall Labor Effectiveness) of PAC(Performance and Analysis and Control) activities, and OYE (Overall Yield Effectiveness) of TMM(Total Material Management) activities. The financial accounting metrics include ROE(Return on Equity), ROA(Return on Asset), and AVR(Added-Value Rate). The suggested chain reaction model selects the financial metrics as initial stage and branch down until final stage of productivity metrics. When demand exceeds supply, an ideal speed rate, the lean OEE strategy can be initially applied to reduce the gap between the demand and supply, then apply variable costing to estimate correct amount of operating profit. In addition, the paper presents a new type of model for linkage between financial accounting metrics including CAPEX(Capital Expenditure), OPEX(Operating Expenditure), EVA(Economic Added Value), DCL(Degree of Combined Leverage), and TPM productivity activities including AM(Autonomous Maintenance), PM(Preventive Maintenance), MP(Maintenance Prevention) and QM(Quality Maintenance). In order to support the evidence of proposed linkage strategy, a case analysis on 52 projects from national TPM contest from 2011 to 2012 is analyzed. The case presents the classification of CAPEX and OPEX activities from TPM, and proposes the correct implementation of financial effect for TPM projects.