• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.513-516
• /
• 2000

In this paper, we investigate the effect of the retransmission limit both the system capacity and the average number of retransmissions in a voice/data DS-CDMA system. Basically, we consider the IS-95 type reverse link of the CDMA system, which supports two kinds of services: a general voice and a packetized data service. ARQ is used for the reliable data transmission. Convolutional code is used for FEC and CRC-CCITT code is used for the error detection in ARQ. The result shows that the number of concurrent data users decreases as we reduce the number of the retransmissions. However, at the same time, we can also reduce the average number of retransmissions. Concluding1y, we can select the retransmission limit so as to reduce large amount of' retransmissions with small sacrifice in the system capacity.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.1
• /
• pp.56-69
• /
• 2021

In this paper, the PV system with a link to the commercial system needs some advantages like small capacity, high power factor, high reliability, low harmonic output, maximum power operation of solar cell, and low cost, etc. as well as the properties of inverter. To transfer the PV energy of photovoltaic power generation system to the system and load, it requires PCS in both directions. The purpose of this paper is to confirm the stable power supply through the load leveling by presenting the PCS considering ESS of photovoltaic power generation. In order to achieve these purpose, 5 step process of operation mode algorithm were used according to the solar insolation amount and load capacity and the controller for charging/ discharging control was designed. For bidirectional and effective energy transfer, the bidirectional converter and battery at DC-link stage were connected and the DC-link voltage and inverter output voltage through the interactive inverter were controlled. In order to prove the validity of the suggested system, the simulation using PSIM was performed and were reviewed for its validity and stability. The 3[kW] PCS was manufactured and its test was conducted in order to check this situation. In addition, the system characteristics suggested through the test results was verified and the PCS system presented in this study was excellent and stronger than that of before system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1846-1854
• /
• 2022

The sophistication and diversification of mission equipment for surveillance and reconnaissance is leading to a demand for large-capacity public data links. Overseas, a T4 class(274Mbps) common data link was applied to the Global hwak, a high-altitude unmanned aerial vehicle, and various research and development are being conducted in Korea. In this paper, we propose a structure in which pilot is additionally applied to improve SNR performance while minimizing data transmission rate loss in the DVB-S2 frame structure, which is a european satellite broadcasting standard, for high-capacity transmission of T4 class or higher in the common data link. For the performance evaluation of the proposed structure, the performance of the DVB-S2 was compared and analyzed by simulating the UAV data link channel environment. As a result of simulation, 0.15% of transmission rate loss occurred at T4 class transmission rate compared to DVB-S2 in the proposed structure, but improved SNR reception performance of 0.2~0.3dB was confirmed in the UAV channel environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.362-374
• /
• 2000

In this paper, trellis coded 16 QAM Multi-Carrior CDMA system is proposed, Using the equivalent signal-to-noise plus interference Power ratio (SNIR) of Multi-Carrier CDMA system in the reverse link, capacity and BER performance of trellis coded 16 QAM Multi-Carrier CDMA system are analyzed taking into account the number of multi-carrier, the number of multiple access user, the number of SC/MRC diversity branch, and Rician fading parameter in multiuser interference and Rician fading channel. And the capacity and the BER performance of trellis coded 16 QAM Multi-Carrier CDMA system using selection combining (SC) and maximal ratio cabining (MRC) diversity are numerically compared. Obtained results show that the capacity of proposed system depends on the number of multi-carrier. ti is found that the trellis coded 16 QAM Multi-Carrier CDMA system with SC/MRC antenna diversity scheme is efficient to combat multipath fading and to increase the maximum number of users in high speed data communication. With the results of analysis. MRC diversity technique provides the performance fro high speed data communications. Finally, we present a numerical approach to derive the capacity and the BER performance and to find the maximum number of multiple access user for Multi-Carrier system in multiuser interference and Rician fading channel.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.353-362
• /
• 2015

Cyclic loading tests for the PC moment frame with plastic shear hinges were performed to evaluate the seismic performance. The plastic shear hinges consisted of two steel plates were installed at the mid-length of the beam to connect the PC frames. Three shear links are existed in each steel plate. The three shear links were designed using shear force corresponding to the shear capacity of 50%, 75%, and 100% of the beam shear capacity. The proposed connections showed an efficient energy dissipation capacity and good structural performance. As a result, it is reasonable to design the plastic shear hinges using design shear capacity less than 100% of the beam shear capacity.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.704-715
• /
• 2016

In this paper, we explore a low-complex bandwidth allocation (BA) scheme with multi-level service guarantees in VLC-OFDM systems. Effective capacity theory, which evaluates wireless channel capacity from a novel view, is utilized to model the system capacity under delay QoS constraints of the link layer. Since intensity modulation of light is used in the system, problems caused by frequency selectivity can be neglected. Then, the BA problem can be formulated as an integer programming problem and it is further relaxed and transformed into a concave one. Lagrangian formulation is used to reformulate the concave problem. Considering the inefficiency of traditional gradient-based schemes and the demand for distributed implementation in local area networks, we localize the global parameters and propose a quasi-distributed quadratic allocation algorithm to provide two-level service guarantees, the first level is QoS oriented, and the second level is QoE oriented. Simulations have shown the efficient performance of the proposed algorithm. The users with more stringent QoS requirements require more subcarriers to guarantee their statistical delay QoS requirements. We also analyze the effect of subcarrier granularity on the aggregate effective capacity via simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.789-794
• /
• 2011

We analyze the capacity of CDMA base stations in the subway environment. We investigate the characteristics of multipath fading, cell structures, and propagation environment in the subway, analyze signal to noise ratio, sectorization gain, path-loss exponent, frequency reuse factor, and obtain the link capacity of a base station in the subway. We measure the peakedness factor and reveal that base stations in the subway have peaked traffic. We use Neal-Wilkinson model to obtain the Erlang capacity instead of Erlang-B model based on Poisson traffic.

• Journal of Advanced Navigation Technology
• /
• v.7 no.1
• /
• pp.51-58
• /
• 2003

Generally, multi-path is viewed as an undesirable feature of wireless communications. Therefore, diversity reception and adaptive array schemes are proposed to mitigate its effects. Recently, to increase the spectrum efficiency and the link reliability, multiple-input multiple-output (MIMO) scheme is devised to exploit multi-path in a scattering wireless channel. In this paper, we have evaluated the channel capacity of MIMO Multi-Carrier CDMA system in path correlation fading channel. And, the channel capacity of MIMO system is compared with single-input single-output (SISO) system. From the results, the MIMO multi-carrier CDMA system with path correlation yields better performance with respect to channel capacity than a SISO system.

• Journal of Korean Society of Steel Construction
• /
• v.30 no.1
• /
• pp.37-48
• /
• 2018

Cyclic loading tests for shear dominant hybrid steel link beams with circular web openings were performed to evaluate the seismic performance. Four half-scaled specimens with bolted connections were tested. The test parameter is a diameter of the web opening, i.e., shear strength ratio ($V_{pw}/V_p$) of the link beam and presence of top-seat angles. Using test results, adequate design shear strength of link beam was finally suggested. Test results showed that when the shear capacity is less than half of the plastic shear strength, seismic performance was improved due to mitigation of pinching under reversed cyclic inelastic deformations.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1069-1076
• /
• 2019

With the development of information and communication technology, the military's battle environment is changing greatly to network centric warfare in where weapon system is connected in a network and carries out mission by exchanging the real-time data. The core of the network centric warfare is Tactical Data Link(TDL) system, and subscribers of TDL exchange tactical information in real time through wireline, wireless and satellite network to share the battlefield situation. The amount of data sent and received through TDL inevitably increase as military's weapon systems equipped with TDL systems increase over time and the performance of communications equipment improves. This study proposes ways to improve the transmission speed and processing capacity of the TDL system by improving the Data Link Processor.