• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.11
• /
• pp.87-92
• /
• 2005

This paper analyzes the performance for an improved multistage parallel interference cancellation (PIC) technique with a reverse-link synchronous transmission technique (RLSTT) for DS-CDMA system in a frequency-selective Rayleigh fading channel with an imperfect power control scheme. The performance degradation due to power control error (PCE), which is approximated by a log-normally distributed random variable, is estimated as a function of the standard deviation of the PCE. The uncoded bit error performance is evaluated in order to estimate the system capacity. Comparing with the conventional one-stage PIC system, we show achievable gain around $60\%$ by the RLSTT even in the presence of PCE. We conclude that the capacity can be further improved via RLSTT, which alleviates the detrimental effects of the PCE

• The Journal of the Korea Contents Association
• /
• v.10 no.4
• /
• pp.55-65
• /
• 2010

We present a method for increasing network lifetime without link failure due to lack of battery capacity of nodes in wireless ad-hoc networks with low mobility. In general, a node with larger remaining battery capacity represents the one with lesser traffic load. Thus, a modified AODV routing protocol is proposed to determine a possible route by considering a remaining battery capacity of a node. Besides, the total energy consumption of all nodes increase rapidly due to the huge amount of control packets which should be flooded into the network. To reduce such control packets efficiently, a source node can store information about alternative routes to the destination node into its routing table. When a link failure happens, the source node should retrieve the route first with the largest amount of the total remaining battery capacity from its table entries before initiating the route rediscovery process. To do so, the possibility of generating unnecessary AODV control packets should be reduced. The method proposed in this paper increases the network lifetime by 40% at most compared with the legacy AODV and MMBCR.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.408-414
• /
• 2020

The method of overcoming the limitation of optical phase conjugator applied into optical long-haul link for transmitting high capacity wavelength division multiplexed (WDM) channels was investigated. The configuration of optical link was based on dispersion-managed link, in which dispersion compensating fiber inserted into each fiber span with single mode fiber, and optical phase conjugator was added into suitable location of link. The maximum number of fiber spans as a function of the launch power of WDM channels in optical link with optical phase conjugator placed at the proposed location was induced and compared for analyzing the compensation performance of the distorted WDM channels. It was confirmed that the more optical phase conjugator depart from the midway of total transmission length, the less the distorted WDM channels was compensated, however, it was also confirmed that the degradation of compensation can be overcome by the suitable value of residual dispersion per span and by the reasonable choice of fiber span controlling total dispersion accumulated in overall transmission link.

• Journal of Korea Multimedia Society
• /
• v.7 no.11
• /
• pp.1580-1587
• /
• 2004

Nowadays, VPN(Virtual Private Network) devices supporting multi-link connections only utilize the second link to backup the fail-off primary link. In practice, however, the occurrence of the link fail-off is so rare that the capacity available on the second link is wasted. In this paper, a scheme of establishing a VPN with multi-links, and load balancing between the links under normal circumstances is proposed in order to take advantage of multi-links, and to eventually increase the effective bandwidth of the VPN. Additionally, the transition functionality is also applied for the link fail-off case like existing VPN devices. Consequently, the proposed scheme enables VPNs with multi-links not only to maintain the higher availability but also to highly increase the effective bandwidth.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.2
• /
• pp.73-78
• /
• 2020

In this study, a novel reactive power control scheme is proposed to supply stable reactive power to the distribution line by compensating a ripple voltage of DC link. In a single-phase system, a magnitude of second harmonic is inevitably generated in the DC link voltage, and this phenomenon is further increased when the capacity of DC link capacitor decreases. Reactive power control was performed by controlling the d-axis current in the virtual synchronous reference frame, and the voltage control for maintaining the DC link voltage was implemented through the q-axis current control. The proposed method for compensating the ripple voltage was classified into three parts, which consist of the extraction unit of DC link voltage, high pass filter (HPF), and time delay unit. HPF removes an offset component of DC link voltage extracted from integral, and a time delay unit compensates the phase leading effect due to the HPF. The compensated DC voltage is used as feedback component of voltage control loop to supply stable reactive power. The performance of the proposed algorithm was verified through simulation and experiments. At DC link capacitance of 375 uF, the magnitude of ripple voltage decreased to 8 Vpp from 74 Vpp in the voltage control loop, and the total harmonic distortion of the current was improved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12A
• /
• pp.1223-1228
• /
• 2006

Closed-form expressions for capacity bounds of multiuser diversity combined with maximum ratio transmission (MRT) and maximum ratio combining (MRC) at each link are presented under the assumption of independent and quasi-static flat multiple-input multiple-output (MIMO) Rayleigh fading channels. The analysis results precisely agree with the numerical verification results and clearly show the impact of MRT/MRC on multiuser diversity.

• Journal of Communications and Networks
• /
• v.11 no.4
• /
• pp.384-389
• /
• 2009

Optical wireless communication (OWC) systems are rapidly gaining popularity as effective means of transferring data at high rates over short distances. OWC facilitates rapidly deployable, lightweight, high-capacity communication without licensing fees and tariffs. Nevertheless, the performance of this new technology depends strongly on the atmospheric conditions and the characteristics of the link. In this work, we study the influence of these parameters on both the average (ergodic) capacity and the outage capacity of an OWC system over moderate to strong turbulence channels modeled by gamma-gamma distribution. Moreover, we compare the results that we obtain estimating the average and outage capacities.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.19-22
• /
• 2005

In order to achieve high capacity and reliable link quality in user communication, this paper proposes a new concept of virtual cell: the Dual Virtual Cell(DVC), and DVC employment strategy based on DWCS. The proposed system uses two kinds of virtual cell. One is the AVC(Active Virtual Cell) which exists for actual traffic and the other is the CVC(Candidate Virtual Cell) which contains a set of candidate antennas to protect user's link quality from performance degradation or interruption. And also this system aims to reduce MT's overloads and acheive a prompt link change successfuly by introducing DVC structure which makes it possible for network to monitor real-time channel and to conrol communication links. The proposed system constructs DVC by using antenna selection method and improves frame error performance with employing Space-Time Trellis Code(STTC).

• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1421-1428
• /
• 2015

The efficiency and reliability of the dual-buck inverter (DBI) were greatly improved by eliminating the shoot-through problem and optimally designing the freewheeling diode. The traditional DBI suffers from large harmonic components with low output voltage and large capacity output filter inductor. To overcome the aforementioned disadvantages, a modified DBI (MBDI) was proposed by adopting a quasi-resonant link and pulse density modulation (PDM). This paper first introduces the working principle of the MBDI and PDM, and then the selection principle of system parameters is presented. Finally, a mathematical model of the MBDIis built, and an experiment prototype is set up. Simulation and experimental results verify the correctness of the theoretical analysis and the feasibility of the scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.281-286
• /
• 1993

In this paper, a parallel link typed wrist is developed for robotic precision assembly. The developed wrist can make the corrective motion required for compensating lateral and tilting errors. The mechanism of this wrist is one example of a motion simulator generating 6 DOF motion in space by 6 actuators connected in paralle. To make the wrist more compact, miniature DC motors containing reduction gears and servo system were used. The parallel link architecture enables a high positioning accuracy and high nominal load capacity. In this study, inverse kinematic problem is solved by using a Denavet-Hartenberg method and a simulational result about workspace of the proposed parallel mechanism is obtained.