• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1510-1519
• /
• 2007

This comparative study analyzes and compares tight skirt sewing methods which are found in the clothing configuration reference text books available in contemporary universities and which are used in commercially-available domestic consumer products. The study samples included 15 text books and 12 tight skirt consumer products of different brands on sale at three department stores in Seoul each of which had a belt, a back-centered zipper, and back double slits. The findings of the study are summarized as follows: First, text books mainly show very basic sewing methods of using zippers on both sides of the straight-lined waist belt. This indicates that it is necessary for such methods to be complemented so that they cover a recent variety of designs, materials, and sewing machines. For consumer products, the main sewing method is to use a curved waist belt and a console zipper in silhouette running across half the hipbone. Second, consumer products employ three different types of cutting and sewing methods for putting an inseam on the center of the back slit part: to leave the whole inseam hemmed in the back center, to cut the left side of the inseam to the upper part of the back slit, and to cut the inseam to both the upper parts of the back slit. However, a method shown in most of the sampled text books is to cut the inseam of the back center to both the upper parts of the back slit. Third, the way of finishing a bottom edge hem in the text books is to do slip-stitch, herringbone stitch, and slinting hemming, in order after doing over-lock stitch, or to cut the hem on the bias and then slip-stitch, while for the consumer products the most frequently used sewing method is to finish the bottom edge hem by doing secoui-stitch. Finally, while in the text books the method of stitching darts and tucks is used for lining, the main lining method used in consumer products is to make tucks only. Also in the way of stitching the side seams of lining or the seams of the back center, there is a difference between the two sample groups of text books and the consumer products: while the former suggests using both open seams and over-lock stitch, the latter is found to finish the seams using an over-lock stitch only.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.12
• /
• pp.81-89
• /
• 2012

The existing tunnel in urban area can be enlarged because of requirement of road-widening by traffic growth. The protector with rectangular cross section can be set up in the tunnel, which will be constructed for enlargement of width, to solve traffic jam around the tunnel. It is impossible to install the rockbolt in the lower area of tunnel due to a limited space between the protector and cutting surface. The objective of this study is to suggest the method of shotcrete thickness increase instead of rockbolt installation in the side wall of tunnel for the stability of tunnel. Numerical analysis was performed to evaluate displacement at the crown of tunnel, convergence of tunnel, and stress in shotcrete lining in 3-lane and 4-lane NATM tunnels enlarged from 2-lane conventional tunnel. There were three types of analysis condition, rockbolt installation, no rockbolt installation, and increase of shotcrete thickness without rockbolt in the side wall of tunnel. There was no difference on the displacement at the crown and the convergence of upper tunnel. In the lower tunnel, the convergence in case of no rockbolt installation was larger as maximum 1.3mm than that in case of rockbolt installation. The stress in shotcrete lining in case of no rockbolt installation was larger as maximum 1.3MPa than that in case of rockbolt installation. Numerical analysis was performed to compare the behavior of shotcrete with rockbolt with that of shotcrete, which its thickness was increased, without rockbolt. The shotcrete has an increase of 20%(250mm ${\rightarrow}$ 300mm, 4-lane tunnel)~25%(200mm ${\rightarrow}$ 250mm, 3-lane tunnel) in its thickness to reduce the stress in shotcrete lining. The behavior of shotcrete lining increased the shotcrete thickness by 20%~25% was similar to that of existing shotcrete lining with rockbolt.

• Korean Journal of Head & Neck Oncology
• /
• v.37 no.1
• /
• pp.43-46
• /
• 2021

Mucinous cystadenocarcinoma (MCA) is a malignant tumor that mainly occurs in the breast or ovary, but MCA is internationally rarely reported in head and neck region. Especially MCA in minor salivary gland of oral cavity is even more rare. It is characterized by cystic spaces lining of epithelial cells containing intracytoplasmic mucin. We report a case of MCA in the labial mucosa of upper lip considered to develop from minor salivary gland with a review of literatures.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.746-751
• /
• 2006

The geumjunggu of the onchunchun which is the upper stream have been maintained as a too much picture to become a concrete lining about existing low flow channel and the reservoir water protecting banks for the reason of the flow of an upper stream steep slope and back of the shortage of the channel area in a suitableness interval. This research made a rating-curve to decide since to ensure against risks to the flood control through the undo of the rivers. And we found the speed of current of a nature undo interval and existing concrete interval and water level change out. A result from this natural disposition we must apply as a data for the research about the plan to be established in the rivers maintenance basis plan of onchunchun.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.542-547
• /
• 2021

Glass lined impellers are corrosion resistant to most chemicals, including strong acids, and also have a smooth, non-stick surface, easy to clean and free from impurities in the process. Glass lined home base impeller is a multi-purpose impeller designed to stir a wide viscosity range of liquids from low viscosity fluids to high viscosity fluids, among others, cell culture, yeast culture, and beer fermentation pots, especially used for air-water system breathable stirring. The glass lining for HB impellers, which are simple in structure and competitive in performance, is essential to have upper and lower division in order to make the joint area between the impeller and shaft as small as possible. The upper and lower division of the impeller hardly affects the mixing performance, but the aeration performance. In this study, in order to optimize the shape of the Glass Lining HB impeller, a study was conducted on the effect of the angle between the upper and lower impellers, the clearance between the impellers, and the number of baffles on the aeration power. The optimal shape and baffle plate conditions for the Glass lined HB impeller were derived through the study results that the angle and the clearance between the upper and lower impellers decreased the ration of the power consumption with aeration P_g and that without aeration P₀, P_g/P₀.

• Journal of the Korean Society of Costume
• /
• v.60 no.4
• /
• pp.58-75
• /
• 2010

The purpose of this study is to investigate the characteristics of fur and leather clothes of minority races of China in Northeas and Inner Mongolia. To examine their characteristics, the clothes and ornaments were classified into four types: headwear, clothes, footwear, and accessories. First, headwear was divided into animal head-shaped, petal-shaped, round-shaped, and cone-shaped head wear. Among them, the animal head-shaped headwear was made by making the best use of the shape of animal's head and it was used as the best disguising method when hunting. Second, clothes were composed of upper garments and lower garments. For the upper garments, Po and Jeogori were worn and pants were worn for the lower garments. The clothes were decorated with lining, applique, or top-stitching on the outer collar, neck circumference, and the edge of sleeves and pants. Third, for the footwear, high boots of leather were developed to meet the needs for a convenient life in the plains. In some areas, fur shoes and leather shoes were also used. Finally, accessories included bags and gloves. Bags were usually decorated with fur on the outside or with a fringe or applique of tanned leather. Gloves were lavishly decorated with embroideries and partly with fur or leather.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.2
• /
• pp.169-181
• /
• 2009

The purpose of this study was to provide basic information for developing a smart taekwondo uniform with enhanced functionality for children by investigating the wearing condition and satisfaction of taekwondo uniform among taekwondo training children. The data were collected from 162 children living in Seoul and Daegu. For data analysis were performed descriptive statistics, ${\chi}2$ -test and t-test using SPSS Ver. 12. The results of the analysis are as follows. The results revealed that respondents wearing the general training uniform during their training period were the most. The dissatisfaction for the general training uniform was a high price, lack of symbolic, lack of functionality in textiles, lack of variety in design and unfittness of size in order. The developed uniform can adjust the length using a zipper type fastener, and can be used in all seasons as the lining is detachable. It also uses nano-silver material, and soil release finish. It enhances the functionality of movement by treating with raglan sleeve and sleeve hem velcro tape, and designs the upper garment in the draping. Safety is improved through attaching GPS, and elastic material is mixed in the neckline for putting on and off easily. Piece of cloth is added inside the closing of the upper garment. Rings are made for fixing the taekwondo uniform belt. Pocket is designed in the lower garment and colors are multiplied.

• Archives of Craniofacial Surgery
• /
• v.9 no.2
• /
• pp.90-92
• /
• 2008

Purpose: Congenital upper eyelid defect is rare anomaly whether it is compared with syndromic anomaly or not. It has many clinical manifestation in the extent, location. Many operation procedures such as simple closure, semicircular rotation flap, Cutler Beard procedure, lower lid rotation flap, etc can be used to reconstruct eyelid defects. We intend to introduce a simple, congenital eyelid defect which was not compared with syndromical anomaly, ophthalmic complication. Methods: Our experience is a case of 19 years old female who had a upper eyelid coloboma without any other anomalies. we could not find any skeletal deformity in orbital CT scan. she had no ophthalmic problem. we reconstructed the defect with bilateral marginal flap after deepithelization of supramarginal area and tarsal reposition. Results: There were no visible deformity of lid lining. postoperative scar was favorable. satisfactory results were obtained in cosmetic and functional aspects. Conclusion: Upper lid coloboma without other anomalies is rare. we obtained satisfactory outcome as treated this rare case with marginal flap advancement.

• Journal of the Korean Home Economics Association
• /
• v.37 no.12 s.142
• /
• pp.141-151
• /
• 1999

This study was carried out to examine the effects of textile materials for thermal insulation value using a thermal manikin. Cotton, polyester, wool, silk and rayon were selected as outer wears like blouses, skirts, slacks, and one-pieces. Acetate was chosen as a lining. Brief and long sleeve upper underwear(cotton) were chosen as the inner wears. The results were as follows; There were no significant differences among the materials in skirts and blouse-skirt suits by the thermal manikin. However blouses, slacks, one-pieces and blouse-slacks suits were showed the effects of materials. Blouse-slacks suits was showed the highest thermal insulation value and one-piece had the lowest thermal insulation value.

• Fashion & Textile Research Journal
• /
• v.8 no.2
• /
• pp.196-202
• /
• 2006

In this study the swimwear pattern focused on a typical middle-aged women's body was developed and discussed. To determine the characteristics of a typical middle-aged women's body, their actual bust were cast. According to a generated flattened body surface shell, the right side of pattern was designed considering stretching ratio of swimwear materials as shown in the figure 3. Special features of the developed swimwear pattern are a bust dart, a particularly designed lining, a power-net, and a brassiere-cup. Against a commercial swimwear pattern, the darts were applied to bust area considering its volume. The lining was attached on the entire right side except brassiere part, and power-net was added twice on belly and hip part. As a result, silhouette and body shape were improved. The new brassiere-cup was designed and made to satisfy the middle-aged women's demand about their bust volume. Swimwear fitting test was performed, and it was evaluated. The developed swimwear rated activity, body support, entire silhouette, pressure, comfortable fitting, suitability with body figure, nudity higher by comparison with a commercial swimwear, as shown in the Table 6. Specially the developed swimwear satisfied future customers about a bust, a hip, a waist, a belly area, which the middle-aged women are not confident. Reducing exposure of an armhole and upper leg area, it also satisfied them. New developed swimwear pattern will provide useful reference to swimwear businesses targeting middle-aged women.