• Archives of design research
• /
• v.19 no.1 s.63
• /
• pp.163-170
• /
• 2006

Recently automotive markets are on the way into maturing status with the mega merger between makers which brought equalizations of technology and upgrade of overall performance of vehicles. For the reason why it is the recent trend which has more importance on the software oriented element such as the style design of vehicles than the hardware such as the mechanical elements. This changing characteristics of automotive design which requires more creativity and finished style treatment on an automotive design demand the specific method of designing from the lingual concept of the vehicle. In this research the possibility has been observed the design elements between the greenhouse of the vehicle body with analyzing the shape elements of it and the change of the characteristics of body shape had been observed. The possibility of extract of creating the method of specifying the shape from the lingual concept had been examined either.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.395-411
• /
• 1993

The purpose of this study was to examine the clear concept of the designs for cavity preparations. Among the several parameters in cavity designs, profound understanding of isthmus width factor would facilitate selection of the appropriate cavity preparation for a specific clinical situation. In this study, the cavities were prepared on maxillary first premolar and filled with gold inaly. A two - dimensional model was composed of 1037 - node triangle elements. In this model, isthmus was varied in width at 1/4, 1/3 and 1/2 of intercuspal width and material properties were given for four element groups, i.e., enamel, dentin, pulp and gold. The 500N occlusal load varied in direction and it was examined using three types of load : concentrated load, divided load and distributed load. The models were also examined with empty cavities using the devided load and distributed load. These models were analyzed the displacement and strees distribution by the two - dimensional Finite Element Method. The results were as follows : 1. All experimental models which filled with gold inlay after cavity preparation were similar direction of displacement with control model under same load type. But in the models with empty cavities, as isthmus width was wider, the degree of displacement was increased at same load type. 2. Among the experimental models which were filled with gold inaly after cavity preparation, the model II showed the least stress concentration under concentrated load and divided load. But in the models with empty cavities, the model III showed the largest stress concentration and tooth fracture is expected regardless isthmus width. 3. All experimental models showed similar displacement pattern beneath restorative material under a concentrated load. In the models with empty cavities, a divided load resulted in a lingual displacement of the lingual cusp, but a distributed load resulted in a buccal displacement of the lingual cusp. In regard to the above results, the restored models were stronger than empty models in respect to the bending moment and tensile stress. The empty models are expected to fracture regardless isthmus width. The safest isthmus width was 1/3 of intercuspal distance, which showed the least stress concentration in respect to the effect of stress distribution.

• Korean Journal of Cleft Lip And Palate
• /
• v.12 no.2
• /
• pp.73-84
• /
• 2009

The treatment of cleft lip and palate must be based on a complete knowledge of the anatomy, physiology and growth of the involved deformity, because of not only the appearance but also impaired functions such as phonation, mastication, respiration and lingual posture of the maxillomandibular complex. Delaire has long studied all these aspects, and has published many numbers of articles and constructed a philosophy concerning the significance and interrelationship of the various structures. The results obtained from its application seem to be particularly valid from a clinical point of view, although it has not all been scientifically supported by experimental data. For these reasons, Delaire's primary unilateral and bilateral cheilorhinoplasty procedures are particulary good, as is his secondary gingivoalveoloplsty procedure during the course of the surgical repair of the hard palate. In order to understand Delaire's philosophy, it is necessary to consider the normal and pathologic anatomy of the structures involved in the deformity, the role of some structures, such as nasal septum, musculature, and tongue, and some functions, such as dental occlusion or nasal respiration, which play important roles in maxillary and particularly premaxillary growth. Despite of important concept and meanings, Delaire's philosophy has not been introduced widely to our Korean cleft surgeons yet. So authors will summarize the basic concepts of Delaire's philosophy according to already published literatures and lectures based on our previous treatment outcomes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.18-25
• /
• 2023

We present the case of a 65-year-old man with maxillary and mandibular complete dentures prepared using neutral zone technique after undergoing mandibulotomy due to tonsil cancer 10 years ago. The patient had a short edentulous period; hence, there was minimal absorption of the alveolar ridge and no abnormality in the motor function of the tongue. However, the retromolar pad was located inside the hamular notch, and the posterior alveolar ridge was relatively turned inward. If the artificial teeth would have been aligned conventionally, the functional space of the tongue would have been invaded, which would have moved the tongue posteriorly thereby reducing the stability of the denture. Therefore, applying the concept of the neutral zone can be a good reference point in such cases. The neutral zone was registered using tissue conditioner, and tooth alignment was performed by making a silicone putty index. The biggest advantage of using neutral zone concept is denture stability. In this case, the neutral zone technique was applied to obtain the lingual alignment limit of the posterior teeth to avoid invasion of the tongue space by the left posterior part of the mandible. Particularly, in case of a patient in which denture stability is difficult to obtain due to absorption of the alveolar ridge, it is believed that better results can be obtained using neutral zone technique.

• International Commerce and Information Review
• /
• v.19 no.1
• /
• pp.127-152
• /
• 2017

One of the biggest challenges in export activities of SME is the increasingly cultural diversity that requires especially export managers to adapt their doing business in many different kinds of cross-cultural situations effectively. A relative newly developed concept 'Cultural Intelligence' has been evaluated as a key element for the success in international business activities. This study aims to investigate empirically the role of Cultural Intelligence(CQ), one component of cultural competence, on export marketing adaptation. The statistical method used to test the hypotheses was Structural Equation Modeling using PLS. The results of this study are follows. The moderating role of Cultural Intelligence between information seeking and information using abilities is more stronger in marketing rather than relationship adaptation. Cultural Intelligence moderates between them. Critical factors affecting Cultural Intelligence are also discussed; foreign language fluency, business travels in abroad, characteristics of the business travels, multi-lingual ability, pre-education related cultural subjects, and visit experience in foreign countries. Especially, export managers' foreign language ability leads to much stronger influence on cultural intelligence. The result of the empirical study provides important implications for export SME and export supporting organizations. Export firms and supporting organizations must expand programs widely in multi cultural training and education to help managers gain a better understanding in a various export environment.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.432-461
• /
• 1995

The basic principles in the design of Class II amalgam cavity preparations have been modified but not changed in essence over the last 90 years. The early essential principle was "extension for prevention". Most of the modifications have served to reduce the extent of preparation and, thus, increase the conservation of sound tooth structure. A more recent concept relating to conservative Class II cavity preparations involves elimination of occlusal preparation if no carious lesion exists in this area. To evaluate the ideal ClassII cavity preparation design, if carious lesion exists only in the interproximal area, three cavity design conditions were studied: Rodda's conventional cavity, simple proximal box cavity and proximal box cavity with retention grooves. In this study, MO amalgam cavity was prepared on maxillary first premolar. Three dimensional finite element models were made by serial photographic method. Linear, eight and six-nodal, isoparametric brick elements were used for the three dimensional finite element model. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. Three types model(B option, Gap option and R option model) were developed. B option model was assumed perfect bonding between the restoration and cavty wall. Gap option model(Gap distance: $2{\mu}m$) was assumed the possibility of play at the interface simulated the lack of real bonding between the amalgam and cavity wall (enamel and dentin). R option model was assumed non-connection between the restoration and cavty wall. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed the displacement, 1 and 2 direction normal stress and strain with FEM software ABAQUS Version 5.2 and hardware IRIS 4D/310 VGX Work-station. The results were as followed. 1. Rodda's cavity form model showed greater amount of displacement with other two models. 2. The stress and strain were increased on the distal marginal ridge and buccopulpal line angle in Rodda's cavity form model. 3. The stress and strain were increased on the central groove and a part of distal marginal ridge in simple proximal box model and proximal box model with retention grooves. 4. With Gap option, Rodda's cavity form model showed the greatest amount of the stress on distal marginal ridge followed by proximal box model with retention grooves and simple proximal box model in descending order. 5. With Gap option, simple proximal box model showed greater amount of stress on the central groove with proximal box model with retention grooves. 6. Retention grooves in the proximal box played the role of supporting the restorations opposing to loads.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.234-238
• /
• 2016

Purpose: Increasing use of computer aided design-computer aided manufacturing (CAD-CAM) system and number of design software made design of restoration easy and quick. Outcome of restoration has been dependent on dental technician's wax up proficiency, dentists can design restoration for themselves now. This study aims to investigate the outcome of restoration designs, according to handling skill of CAD-CAM design tool. Materials and methods: A patient's mandibular right 1st molar was prepared. After taking impression, stone model was made, scanned the stone model with 3 shape intra-oral scanner, stereolithography (STL) file was extracted. With 3shape dental designer, one dental technician with more than 5 years work experience (designer 0) and three dental technicians with less than 2years work experience (designer 1, 2, 3-group DT) and 4 1st year residents (designer 4, 5, 6, 7-group RT) designed gold crown on the same STL file. Designed crown's MD (mesio-distal) and BL (bucco-lingual) diameter, height of crown, inter-cuspal distance, number of occlusal contact points were compared. Statistical analysis was carried out, test of normality within each group, using independent t-test. Number of contact points were compared, using Wilcoxon signed-rank test. Results: There was no significant difference between group DT and group RT. Number of contact points also resulted in no significant difference. Conclusion: The outcome of each designed crowns showed no statistical differences, in values which can be expressed as numbers. Subjective factors were different. With increasing proficiency in handling designing software, fabrication of restorations according to each designer's occlusal concept can be made easy.