• 한국산림과학회지
• /
• 제99권6호
• /
• pp.802-807
• /
• 2010

본 연구에서는 퍼지선형계획법을 적용함으로써 국내의 장기목재공급 잠재력을 예측하고자 하였다. 생산계획 수립을 위한 수식모형을 구성하기 위하여 총 목재생산량의 극대를 목적함수로 설정하였으며, 제약조건으로는 벌채허용면적, 보속수확 등을 고려하였다. 선형계획법과 퍼지선형계획법의 비교 결과 목재생산량 및 입목축척의 관점에서 선형계획법이 퍼지 선형계획법 보다 높게 나타났다. 그러나, 선형계획법에서는 장기적인 관점에서 보속수확을 달성하지 못하는 것으로 나타나 보속성을 고려한 목재공급 잠재력을 예측하기 위해서는 퍼지선형계획법을 적용하는 것이 적합한 것으로 판단되었다. 연구결과 국내 연간 목재공급 잠재량은 약 10.5백만$m^3$으로 추정되었다. 각 지역별 연간 목재공급 잠재량은 경상북도가 가장 많고, 전라남도, 강원도, 그리고 경상남도 순으로 많게 나타났다.

• 대한기계학회논문집A
• /
• 제26권12호
• /
• pp.2492-2502
• /
• 2002

A rubber-like material model is generally characterized by hyperelasticity and formulated by a total stress-total strain relationship because the material shows nonlinear elastic behaviour under large deformation. In this study, a pressure potential obtained by a separately interpolated pressure is introduced to the non-linear finite element formulation incorporating with incompressible or almost incompressible condition of the material. The present formulation is somewhat different from the general formulation using the pressure computed in the displacement field. A non-linear finite element analysis program is developed for the plane strain and the axisymmetric contact problems of a rubber-like material. Various examples with rubber material are analyzed for its verification. The results about deformed shapes and stress distributions thought to be meaningful in comparison with a commercial program, MARC.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.37-44
• /
• 2017

PURPOSES : This study is primarily focused on evaluating the effects of the non-linear stress-strain behavior of RAP concrete on structural response characteristics as is applicable to concrete pavement. METHODS : A 3D FE model was developed by incorporating the actual stress-strain behavior of RAP concrete obtained via flexural strength testing as a material property model to evaluate the effects of the non-linear stress-strain behavior to failure on the maximum stresses in the concrete slab and potential performance prediction results. In addition, a typical linear elastic model was employed to analyze the structural responses for comparison purposes. The analytical results from the FE model incorporating the actual stress-strain behavior of RAP concrete were compared to the corresponding results from the linear elastic FE model. RESULTS : The results indicate that the linear elastic model tends to yield higher predicted maximum stresses in the concrete as compared to those obtained via the actual stress-strain model. Consequently, these higher predicted stresses lead to a difference in potential performance of the concrete pavement containing RAP. CONCLUSIONS : Analysis of the concrete pavement containing RAP demonstrated that an appropriate analytical model using the actual stress-strain characteristics should be employed to calculate the structural responses of RAP concrete pavement instead of simply assuming the concrete to be a linear elastic material.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권2호
• /
• pp.137-141
• /
• 2005

A transverse flux, PM-exited linear motor (TFM-LM) with inner mover was designed and built. Its output power density is higher and its weight is lower than those of the conventional PM exited linear synchronous motors (PM LSM). To obtain the maximum thrust force under the given volume, the thrust force density with respect to the ratio of the slot width and the length of pole pitch is analyzed by the 3-dimension finite element method (FEM). Finally, calculated static thrust forces was compared with the experimental values. The calculated and measured performance of the transverse flux, PM-exited linear motor with inner mover revealed great potential for system improvements by reducing the mass of the linear motor. For examples, when this motor was applied to a ropeless elevator, it was possible to increase the power density by more than 400% over the conventional PM-LSM. The results of this study recommend this type of motor for the ropeless elevator or gearless direct linear driving system.

• 조명전기설비학회논문지
• /
• 제28권9호
• /
• pp.67-72
• /
• 2014

Inflow or outflow from the water treatment plant and the sewage water has potential energy. If this potential energy can be converted into electrical energy by water turbine generator, it can help to save energy because of the high capacity utilization. So recently, micro hydro power plant is reviewed in the water treatment facility. If generation capacity is low, induction generator is primarily used. If output capacity is low, generated power is supplied to the inside load. Induction generator can cause voltage drop by the inrush current at a start-up and requires reactive power for magnetization. In this study, we analyzed the flow of power and voltage variation against inrush current that occurs when the induction generator starts under the terms that loads of linear and non-linear of the water purification plant are used. Analysis results are that the voltage drop is within an allowable range and the power factor is slightly reduced by the need of reactive power.

• 대한화학회지
• /
• 제7권4호
• /
• pp.264-270
• /
• 1963

前報에서 誘導한 置換基效果 一般關係式은 溶媒組成에 따르는 常數, Y를 potential energy 項에 代置함으로서 solvolysis 反應에 適用할 수가 있다. 新方程式, $\Delta{\Delta}H^\neq=a'Y+b\Delta{\Delta}S^\neq$, 의 適用性은 文獻에 報告된 35個反應에 對한 直線關係를 調査해 봄으로서 檢討하였다. 結果로 平均 相關係數 0.977을 얻었고, 따라서 이 方程式이 solvolysis反應에 一般的으로 適用됨을 밝혔고, 또 Grunwald-Winstein의 式이 지니는 몇몇 難點을 解決할 수가 있음을 알 수 있었다. enthalypy-entopy 直線效果는 外部 enthalpy와 外部 entropy에 限한 것이며, 嚴格히 말해서 外部 enthalpy entropy 直線效果임을 强調하였다.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.61-78
• /
• 1995

In this study the method of analysis for three-dimensional plane crack problem by fractional linear mapping is given. Using this method we can obtain the exact solutions of significantly different configurations of the crack. In the example image crack configurations by mapping of elliptic crack are illustrated. And the stress intensity factors along the image crack tips are calculated.

• 대한수의학회지
• /
• 제31권1호
• /
• pp.33-40
• /
• 1991

For the observations of both the membrane properties and the excitability on the unfertilized eggs of female mice, changes of the membrane resistance and the membrane potential by hyerpolarizing current stimulation were recorded. As current-voltage relation was linear over the entire range (-180mV~+60mV), membrane resistance($R_m$) was calculated from the amplitude of electrotonic potential to a given stimulus current. Also the presence of anode-break excitation was confirmed. The results were as follows; 1. There was a linear relation between the membrane resistance and resting membrane potential, the expected input resistance was 61. 4M$\Omega$(resting membrane potential was $-18.9{\pm}8.7mV$, mean${\pm}$SD, n=30). 2. Transient depolarization with overshoot was generated just after hyperpolarizing current stimulus and showed the dependency of stimulus duration. 3. Transient depolarization lasted over 30ms, amplitude of these depolarization was increased by high $Ca^{{+}{+}}$(20mM) and inhibited by $Ca^{{+}{+}}$-antagonist, $Mn^{{+}{+}}$. 4. From the above results, it was suggested that the unfertilized mouse egg showed the characteristics of the excitable cell.

• International Journal of Computer Science & Network Security
• /
• 제21권12호
• /
• pp.309-315
• /
• 2021

The purpose of the article is to analyze the functioning of economic systems in the context of the development of their potential in a circular economy. It is determined that the functioning of economic systems to ensure their sustainability should meet modern challenges and provide for the formation of competitive institutional architecture, the introduction of structural and regulatory innovations, the transition to an innovative model of development. The specific principles of functioning of economic systems include openness, nonlinearity, multivectority, dynamism, emergence, uncertainty about the development of economic processes. It is substantiated that the linear nature of development and equilibrium are not dominant in the functioning of economic systems, and increasing the level of economic efficiency should go hand in hand with minimizing the activities of enterprises, which necessitates the use of circular economy. The main prerequisites for the transition to a circular economy are analyzed. It is determined that the basic concept of the circular economy involves the development of a system of production and consumption, which is based on processing, reuse, repair, product sharing, change of consumption patterns and new business models and systems. The main elements of the circular economy include: a closed cycle, the use of renewable energy sources, systems thinking. The correlation of the principles of sustainable development and the peculiarities of the application of the circular economy is analyzed. It is determined that the circular economy contrasts with the traditional linear economic model, which is based on the model of "take-do-consume-throw away". The advantages and disadvantages due to the use of the principles of circular economy are given. Based on the study, steps are identified to accelerate the transition from a linear economy to a circular economy.

• 대한수학회논문집
• /
• 제26권4호
• /
• pp.591-601
• /
• 2011

In this paper, we deal with the discrete p-Laplacian operators with a potential term having the smallest nonnegative eigenvalue. Such operators are classified as its smallest eigenvalue is positive or zero. We discuss differences between them such as an existence of solutions of p-Laplacian equations on networks and properties of the energy functional. Also, we give some examples of Poisson equations which suggest a difference between linear types and nonlinear types. Finally, we study characteristics of the set of a potential those involving operator has the smallest positive eigenvalue.