• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.999-1005
• /
• 2011

고무복합재료에 대해 변형에 의한 결정화(SIC)가 기계적 특성에 미치는 영향을 연신율(${\lambda}$) 및 다중벽 탄소나노튜브(CNT)와 카본블랙(CB)의 함유량을 함수로 하여 연구하였다. 시차 주사 열량(DSC) 분석을 통해 CB 및 CNT의 함유량에 따라 결정화 정도가 증가함을 확인 하였다. 또한 연신율이 증가함에 따라 복합재료의 유리전이온도(Tg)는 증가하였고, 결정화 잠열 값(LHc)은 ${\lambda}$=1.5에서 최대값을 보였다. CNT의 함유량 증가에 따라 기계적 특성과 LHc는 비례관계임을 확인하였다. 열 중량 분석(TGA)을 통해 기지의 소실율은 94.3%였고, 복합재료의 소실율은 보강재의 함유량 증가에 따라 감소하였다. 인장탄성율 비는 고무 내의 CNT 배향으로 인장강도 비보다 높게 나타났다.

• 융합신호처리학회논문지
• /
• 제7권4호
• /
• pp.184-188
• /
• 2006

본 논문은 협대역의 위성통신 수신신호 전력을 측정하여 이동형 위성통신 안테나를 추적제어하기 위한 DSP 기반의 협대역 위성통신 신호전력 검출기를 제안한다. 기존의 아날로그 검출방식에 의한 협대역 위성통신 신호전력 검출기는 위성 전파경로 상에서 발생되는 반송파의 중심주파수 천이로 인해 고정된 아날로그 필터대역을 통과하여 검출되는 신호 전력의 오차가 심하고 전송 신호의 대역폭 가변에 따른 아날로그 필터의 대역폭을 변경하기가 용이하지 않다. 따라서 이러한 반송파 주파수 천이에 영향 받지 않고 가변 하는 신호 대역폭에 대응하는 필터를 실시간으로 프로그래머블하게 지원하기 위하여 DSP 기반의 협대역 디지털 위성통신 신호전력 검출기를 제안하였다. 제안된 협대역 위성통신 신호전력 검출 알고리즘은 FFT를 이용하여 주파수 천이된 협대역 위성통신 신호의 주파수를 탐색하고 프로그래머블한 디지털 필터를 선택하여 필터링한 다음, 일정구간 주기로 신호전력을 계산하여 12비트 해상도로 출력하는 기능을 가진다. TMS320C5402 DSP 칩을 기반으로 설계 제작된 신호전력 검출기의 실제 시험을 통하여 제시된 요구기능과 규격을 만족하면서 동작함을 검증하였고 실용성을 확인하였다.

• 한국환경교육학회지:환경교육
• /
• 제15권1호
• /
• pp.68-82
• /
• 2002

My responses to Kim Kyung-Ok's Critique on my critique on the Hungerford approach can be summarized as follows; First, it was argued that possible confusions and misunderstandings around the concept of behavior in REB were mainly caused by Hungerford himself who has used the word in several different ways, from a bunch of overt actions to almost all kinds of responses including cognitive skills, without any clear operational definition of it for more than 20 years. It seems to be needed for future users of the word, 'Behavior' to Prevent unnecessary confusions by providing their operational definition of it. Second, REB is too ambiguous to be a legitimate goal of environmental education and too outcome-oriented to be a meaningful measure for environmental education research. Anyone who accept REB as a goal of EE or a measure for research should clearly suggest procedures and criteria for judging the environmental responsibility of actions under consideration. Third, the Hungerford approach has begun by realizing the limit of a linear traditional behavior change system and has been evolving toward a complex model with dynamic interactions among/between cognitive variables and affective variables. However, it still has one-way structural orientation toward 'Behavior' with no feedbacks. Addition of some feedback processes would make the model more flexible and realistic. Finally, both the Hines model and the Hungeford model were established based on a series of behavioristic studies including three doctoral dissertations equiped with a list of actions which were prejudged to be environmentally responsible by the researchers, not by the learners. What they were primarily interested in was not how mind functions during the learning processes but how learners' behavior can be effectively changed. Considering uncertainty and complexity associated with environmental problems, a great deal of efforts ought to be made toward more context-based and less normative studies applying cognitive psychology and quantitative approaches.

• 한국산림과학회지
• /
• 제107권4호
• /
• pp.436-445
• /
• 2018

이 연구는 국유림과 같은 공공부문의 산림면적에 영향을 미치는 요인을 도출하고, 우리나라 국유림의 적정 면적을 파악하는데 목적이 있다. OECD 가입국인 35개국을 대상으로 국 공유림률과 1인당 국 공유림면적을 종속변수로 하여 영향을 미치는 15개의 독립변수를 가지고 선형회귀분석을 실시하였다. 분석 결과, 우리나라의 적정 국공유림면적은 OECD 가입국을 기준으로 최소 약 2,136천ha에서 최대 2,667천ha로 나타났다. 우리나라 2010년도 국 공유림면적이 1,984천ha이기 때문에 우리나라는 국 공유림 면적을 적게는 152천ha에서 많게는 683천ha까지 늘리는 것이 OECD국가의 평균수준에 달하는 것으로 나타났다. 우리나라 국 공유림면적의 확대는 지자체림의 증가를 통해서 확보하기는 현실적으로 불가능하기 때문에 국유림을 확대하여 확대하는 것이 타당할 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제68권5호
• /
• pp.603-619
• /
• 2018

In this research, an effective computational technique is carried out for nonlinear and post-buckling analyses of cracked imperfect composite plates. The laminated plates are assumed to be moderately thick so that the analysis can be carried out based on the first-order shear deformation theory. Geometric non-linearity is introduced in the way of von-Karman assumptions for the strain-displacement equations. The Ritz technique is applied using Legendre polynomials for the primary variable approximations. The crack is modeled by partitioning the entire domain of the plates into several sub-plates and therefore the plate decomposition technique is implemented in this research. The penalty technique is used for imposing the interface continuity between the sub-plates. Different out-of-plane essential boundary conditions such as clamp, simply support or free conditions will be assumed in this research by defining the relevant displacement functions. For in-plane boundary conditions, lateral expansions of the unloaded edges are completely free while the loaded edges are assumed to move straight but restricted to move laterally. With the formulation presented here, the plates can be subjected to biaxial compressive loads, therefore a sensitivity analysis is performed with respect to the applied load direction, along the parallel or perpendicular to the crack axis. The integrals of potential energy are numerically computed using Gauss-Lobatto quadrature formulas to get adequate accuracy. Then, the obtained non-linear system of equations is solved by the Newton-Raphson method. Finally, the results are presented to show the influence of crack length, various locations of crack, load direction, boundary conditions and different values of initial imperfection on nonlinear and post-buckling behavior of laminates.

• 한국항해항만학회지
• /
• 제43권1호
• /
• pp.16-22
• /
• 2019

본 연구에서는 국내 소형 어선의 재화상태에 따른 중량 및 무게중심 추정식을 제안하였다. 소형 어선에 탑재되는 중량물은 선원, 어구 등의 고정 중량과 연료, 청수, 식량, 미끼, 어획물 등의 가변 중량으로 분류할 수 있다. 다양한 소형 어선들의 중량 데이터를 통계 분석한 후, 각 탑재물의 중량 및 무게중심을 총톤수에 대하여 선형 함수화하였다. 그리고 재화상태를 고려하여 각 가변 중량물에 가중치를 부가하는 방식으로 총 중량 및 무게중심 추정식을 구성하였다. 소형 어선의 길이와 총톤수, 그리고 재화상태 정보만을 활용하여 총 중량 및 무게중심을 상당히 신뢰도 높게 추정할 수 있음을 검증하였다.

• 한국환경과학회지
• /
• 제28권3호
• /
• pp.357-369
• /
• 2019

In this study, the water quality components (pH, BOD, COD, TOC, SS, DO, TP) and the water quality, observed for 10 years (2008~2017) in the five tributaries of the Nakdong River with the highest flow rates, were analyzed. Monthly levels of the water quality components were estimated and regression functions were used to quantitatively explain the changes in the BOD and COD components, with respect to the TOC components. The results of analyzing the water quality levels in terms of the living environmental standards show that the lowest water quality was observed midstream (ST-3) and the highest water quality was observed upstream (ST-1 and ST-2). The regression function was estimated to be a linear function in all five tributaries, and the goodness of fit of the function was high upstream (ST-2), midstream (ST-3), and downstream (ST-4). According to the regression analysis using the observation data from 2008~2017, we found that the consumption of dissolved oxygen increased with an increase in organic matter in the major tributaries of the Nakdong River.

• 한국환경과학회지
• /
• 제28권6호
• /
• pp.571-579
• /
• 2019

In this study, monthly average values of BOD, COD, and TOC observed for 10 years (2008-2017) in the Nam River were estimated, and monthly variations of BOD, COD, and TOC were analyzed. Monthly average COD was always higher than monthly average BOD; monthly average TOC was high from June to September when rainfall was high. Monthly correlation coefficients between BOD and COD ranged from 0.57 to 0.94, those between BOD and TOC from 0.45 to 0.93, and those between COD and TOC from 0.75 to 0.93. The correlation coefficients were high from November to February when rainfall was low. Regression analyses for monthly average water quality data of the Nam River classified into dry season (October to April) and wet season (May to September) were conducted. Correlation coefficients were higher in the dry season than those in the wet season, and the determination coefficients of linear regression functions for BOD and COD with TOC were also higher in the dry season than those in the wet season. From this study, it can be concluded that it is appropriate to use monthly data to analyze the correlations among BOD, COD, and TOC in the stream. To analyze the relationship between TOC flowing into the stream and BOD/COD, it was found that seasonal characteristics should be considered.

• 한국시뮬레이션학회논문지
• /
• 제28권1호
• /
• pp.67-79
• /
• 2019

다기능레이더(MFR)를 장착한 함정의 작전수행은 적의 위협에 대한 징후를 바탕으로 위협의 정도를 판단하고 이를 바탕으로 MFR 자원을 위협별로 할당하는 것으로 작전을 시작한다. 본 연구는 MFR 탐지체계를 가진 함정의 임무 시작 시 필요한 위협별 MFR 자원할당 문제에 대하여 시뮬레이션을 이용한 기법과 Greedy 기법을 이용한 MFR 자원할당 방안을 제시하여 그 결과를 비교분석하였다. 분석시 자원할당에 따른 탐지확률 함수가 선형인 경우와 지수형인 경우를 고려하여 실험을 수행하였다. 실험 결과 시뮬레이션 기법과 Greedy기법의 결과는 서로 비슷한 자원할당 결과를 보여주고 있으며, Greedy 기법은 시뮬레이션 기법에 비하여 그 수행시간이 아주 짧아 실제 임무 수행 시에 이용 가능한 기법으로 판단된다. 여러 가지 위협의 정도에 대해 Greedy 기법을 이용하여 MFR 자원할당 결과를 분석하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.199-212
• /
• 2020

A large percentage of maritime accidents in coastal seas are related to small fishing vessels. In order to investigate causes of maritime accidents, it is often necessary to carry out dynamic simulations for the estimation of trajectories and motions of vessels. Initial conditions of vessels such as main dimensions, loading conditions and hydrostatic properties are required for the accurate simulations. Small fishing vessels usually have few records of hydrostatic properties during their fishing operations. Therefore, in this study, estimation procedures for hydrostatic properties of small fishing vessels are proposed. At first, hull form characteristics of Korean small fishing vessels are investigated. Most of vessels have hard-chines and centerline skegs, they have similar hull forms. Bonjean curves of several small fishing vessels whose gross tonnages are below 10 tons are normalized with vessel breadths and depths. Representative bonjean curves are derived from normalized bonjean curves, and a representative hull plan is obtained as well. If the vessel loading conditions such as total weights and centers of gravity are given, fore and aft drafts can be calculated by using the representative bonjean curves with the constraint that weights and buoyancies are in equilibrium. Metacentric heights are also estimated by using the representative hull plan. Drafts and metacentric heights estimated by proposed iterative estimation procedures are compared with actual vessel data, estimated values are in good agreements with actual values. In addition, normalized fore and aft drafts, metacentric heights of vessels can be formulated as the linear functions of normalized total weights and centers of gravity. Empirical formulas of drafts and metacentric heights are proposed, and it is confirmed that the empirical formulas also provide reasonable results, which are similar to the results by iterative estimation procedures with representative bonjean curves and hull plan.