• 한국기후변화학회지
• /
• 제9권2호
• /
• pp.157-169
• /
• 2018

This study explores the long?term trends of extreme temperatures of 270 observation stations in East Asia (China, Japan, and Korea) for 1961?2013. The 5th percentile of daily minimum temperatures (TN05%) and 95th percentile of daily maximum temperatures (TX95%), derived from the quantile regression, are particularly examined in term of their linear and nonlinear trends. The warming trends of TN05% are typically stronger than those of TX95% with more significant trends in winter than in summer for most stations. In both seasons, warming trends of TN05% tend to amplify with latitudes. The nonlinear trends, quantified by the $2^{nd}$?order polynomial fitting, exhibit different structures with seasons. While summer TN05% and TX95% were accelerated in time, winter TN05% underwent weakening of warming since the 2000s. These results suggest that extreme temperature trends in East Asia are not homogeneous in time and space.

• Investigative Magnetic Resonance Imaging
• /
• 제23권1호
• /
• pp.38-45
• /
• 2019

Purpose: To demonstrate the high-resolution numerical simulation of the respiration-induced dynamic $B_0$ shift in the head using generalized susceptibility voxel convolution (gSVC). Materials and Methods: Previous dynamic $B_0$ simulation research has been limited to low-resolution numerical models due to the large computational demands of conventional Fourier-based $B_0$ calculation methods. Here, we show that a recently-proposed gSVC method can simulate dynamic $B_0$ maps from a realistic breathing human body model with high spatiotemporal resolution in a time-efficient manner. For a human body model, we used the Extended Cardiac And Torso (XCAT) phantom originally developed for computed tomography. The spatial resolution (voxel size) was kept isotropic and varied from 1 to 10 mm. We calculated $B_0$ maps in the brain of the model at 10 equally spaced points in a respiration cycle and analyzed the spatial gradients of each of them. The results were compared with experimental measurements in the literature. Results: The simulation predicted a maximum temporal variation of the $B_0$ shift in the brain of about 7 Hz at 7T. The magnitudes of the respiration-induced $B_0$ gradient in the x (right/left), y (anterior/posterior), and z (head/feet) directions determined by volumetric linear fitting, were < 0.01 Hz/cm, 0.18 Hz/cm, and 0.26 Hz/cm, respectively. These compared favorably with previous reports. We found that simulation voxel sizes greater than 5 mm can produce unreliable results. Conclusion: We have presented an efficient simulation framework for respiration-induced $B_0$ variation in the head. The method can be used to predict $B_0$ shifts with high spatiotemporal resolution under different breathing conditions and aid in the design of dynamic $B_0$ compensation strategies.

• 한국의학물리학회지:의학물리
• /
• 제31권4호
• /
• pp.145-152
• /
• 2020

Purpose: In ionization-chamber dosimetry for high-dose-rate electron beams-above 20 mGy/pulse-the ion-recombination correction methods recommended by the International Atomic Energy Agency (IAEA) and the American Association of Physicists in Medicine (AAPM) are not appropriate, because they overestimate the correction factor. In this study, we suggest a practical ion-recombination correction method, based on Boag's improved model, and apply it to reference dosimetry for electron beams of about 100 mGy/pulse generated from an electron linear accelerator (LINAC). Methods: This study employed a theoretical model of the ion-collection efficiency developed by Boag and physical parameters used by Laitano et al. We recalculated the ion-recombination correction factors using two-voltage analysis and obtained an empirical fitting formula to represent the results. Next, we compared the calculated correction factors with published results for the same calculation conditions. Additionally, we performed dosimetry for electron beams from a 6 MeV electron LINAC using an Advanced Markus^® ionization chamber to determine the reference dose in water at the source-to-surface distance (SSD)=100 cm, using the correction factors obtained in this study. Results: The values of the correction factors obtained in this work are in good agreement with the published data. The measured dose-per-pulse for electron beams at the depth of maximum dose for SSD=100 cm was 115 mGy/pulse, with a standard uncertainty of 2.4%. In contrast, the k_s values determined using the IAEA and AAPM methods are, respectively, 8.9% and 8.2% higher than our results. Conclusions: The new method based on Boag's improved model provides a practical method of determining the ion-recombination correction factors for high dose-per-pulse radiation beams up to about 120 mGy/pulse. This method can be applied to electron beams with even higher dose-per-pulse, subject to independent verification.

• Animal Bioscience
• /
• 제34권4호
• /
• pp.506-515
• /
• 2021

Objective: Initial consequence of inbreeding is inbreeding depression which impairs the performance of growth, production, health, fertility and survival traits in different animal breeds and populations. The effect of inbreeding on economically important traits should be accurately estimated. The effect of inbreeding depression on growth traits in sheep has been reported in many breeds. Based on this, the main objective of the present research was to evaluate the impact of inbreeding on some growth traits of Iranian Baluchi sheep breed using quantile regression model. Methods: Pedigree and growth traits records of 13,633 Baluchi lambs born from year 1989 to 2016 were used in this research. The traits were birth weight, weaning weight, six-month weight, nine-month weight, and yearling weight. The contribution, inbreeding and co-ancestry software was used to calculate the pedigree statistics and inbreeding coefficients. To evaluate the impact of inbreeding on different quantiles of each growth trait, a series of quantile regression models were fitted using QUANTREG procedure of SAS software. Annual trend of inbreeding was also estimated fitting a simple linear regression of lamb's inbreeding coefficient on the birth year. Results: Average inbreeding coefficient of the population was 1.63 percent. Annual increase rate of inbreeding of the flock was 0.11 percent (p<0.01). The results showed that the effect of inbreeding in different quantiles of growth traits is not similar. Also, inbreeding affected differently on growth traits, considering lambs' sex and type of birth. Conclusion: Quantile regression revealed that inbreeding did not have similar effect on different quantiles of growth traits in Iranian Baluchi lambs indicating that at a given age and inbreeding coefficient, lambs with different sex and birth type were not equally influenced by inbreeding.

• Geomechanics and Engineering
• /
• 제24권6호
• /
• pp.519-529
• /
• 2021

In coal mining activities, the abutment stress of the coal has to undergo cyclic loading and unloading, affecting the strength and seepage characteristics of coal; additionally, it can cause dynamic disasters, posing a major challenge for the safety of coal mine production. To improve the understanding of the dynamic disaster mechanism of gas outburst and rock burst coupling, triaxial devices are applied to axial pressure cyclic loading-unloading tests under different axial stress peaks and different pore pressures. The existing empirical formula is use to perform a non-linear regression fitting on the relationship between stress and permeability, and the damage rate of permeability is introduced to analyze the change in permeability. The results show that the permeability curve obtained had "memory", and the peak stress was lower than the conventional loading path. The permeability curve and the volume strain curve show a clear symmetrical relationship, being the former in the form of a negative power function. Owing to the influence of irreversible deformation, the permeability difference and the damage of permeability mainly occur in the initial stage of loading-unloading, and both decrease as the number of cycles of loading-unloading increase. At the end of the first cycle and the second cycle, the permeability decreased in the range of 5.777 - 8.421 % and 4.311-8.713 %, respectively. The permeability decreases with an increase in the axial stress peak, and the damage rate shows the opposite trend. Under the same conditions, the permeability of methane is always lower than that of helium, and it shows a V-shape change trend with increasing methane pressures, and the permeability of the specimen was 3 MPa > 1 MPa > 2 MPa.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권1호
• /
• pp.25-30
• /
• 2022

Mackinawite (FeS), as a ubiquitous reduced iron mineral, is known as a key controller of redox reactions in anaerobic subsurface environment. The reaction of FeS with redox-sensitive toxic element such as arsenic is substantially affected by pH conditions of the given environments. In this study, the interaction of As(V) with FeS was studied under strict anaerobic conditions with various pH conditions. The pH-dependent arsenic removal tests were conducted under wide ranges of pH conditions and X-ray absorption spectroscopy (XAS) was applied to investigate the reaction mechanisms under pH 5, 7, and 9. The removal efficiency of FeS for As(V) showed the higher removal of As(V) under low pH conditions and its removal efficiency decreased with increasing pH, and no As(V) reduction was observed in 1 g/L FeS solution. However, XAS analysis indicated the reduction of As(V) to As(III) occurred during reaction between FeS and As(V). The reduced form of As(III) was particularly identified as an arsenic sulfide mineral (As₂S₃) in all pH conditions (pH 5, 7, and 9). As₂S₃ precipitation was more pronounced in pH 5 where the solubility of FeS is higher than in other pH conditions. The linear combination fitting results of XAS demonstrated that As(V) removal mechanism is concerted processes of As₂S₃ precipitation and surface complexation of both arsenic species.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2599-2605
• /
• 2022

The Korea Retrospective Dosimetry network (KREDOS) performed an inter-laboratory comparison to confirm the harmonization and reliability of the results of retrospective dosimetry using mobile phone. The mobile phones were exposed to ¹⁹²Ir while attached to the human phantoms in the field experiment, and the exposure doses read by each laboratory were compared. This paper describes the reference dosimetry performed to present the reference values for inter-comparison and to obtain additional information about the dose distribution. Reference dosimetry included both measurement using LiF:Mg,Cu,Si and calculation via MCNP simulation to allow a comparison of doses obtained with the two different methodologies. When irradiating the phones, LiF elements were attached to the phones and phantoms and irradiated at the same time. The comparison results for the front of the phantoms were in good agreement, with an average relative difference of about 10%, while an average of about 16% relative difference occurred for the back and side of the phantom. The differences were attributed to the different characteristics of the physical and simulated phantoms, such as anatomical structure and constituent materials. Nevertheless, there was about 4% of under-estimation compared to measurements in the overall linear fitting, indicating the calculations were well matched to the measurements.

• 한국지반공학회논문집
• /
• 제22권2호
• /
• pp.41-53
• /
• 2006

텐서(tensor) 이론에 기초한 기존의 구성방정식 모델은 암석(rock)과 같은 준취성 재료에서 나타나는 복잡한 변형열화(strain softening) 과정을 기술하기가 어려우며, 특히 구속압에 따른 변형열화 과정의 변화를 잘 반영하지 못한다. 본 연구에서는 화강암의 3차원 거동을 예측 분석할 수 있는 구성방정식을 마이크로플레인 모델을 이용하여 개발하였다. 화강암에 대한 마이크로플레인 모델은 Westerly 화강암과 Bonnet 화강암의 일축압축 및 삼축압축 시험 데이터와 최적을 이루도록 개발되었다. 개발된 마이크로플레인 모델은 화강암의 일축 및 삼축거동을 잘 예측하였다. 그리고 개발된 화강암의 마이크로플레인 모델을 유한요소법에 적용하여 암석지반 굴착시의 발파 모사를 통해 화강암의 비선형 거동 및 발파시의 파쇄 영역을 해석하였다. 또한 마이크로플레인 모델을 이용한 비선형 해석결과와 탄성해석 결과를 비교 분석한 결과 화강암의 거동은 비선형에 크게 영향을 받는 것으로 나타났다.

• Computers and Concrete
• /
• 제31권4호
• /
• pp.349-358
• /
• 2023

This paper describes an in-depth analysis on flexural strength of a girder-deck system experiencing a strand debonding damage with various strengthening systems, based on finite element software ABAQUS. A detailed finite element analysis (FEA) model was developed and verified against the relevant experimental data performed by other researchers. The proposed analytical model showed a good agreement with experimental data. Based on the verified FE model, over a hundred girder-deck systems were investigated with the consideration of following variables: 1) debonding level, 2) span-to-depth ratio (L/d), 3) strengthening type, 4) strengthening material thickness. Based on the data above, a new detailed analytical model was developed and proposed for estimating residual flexural strength of the strand-debonding damaged girder-deck system with strengthening systems. It was demonstrated that both finite element model and analysis model could be used to predict flexural behaviors for debonding damaged prestressed girder-deck systems. Since the strands are debonding from surrounding concrete over a certain zone over the length of the beam, the increase of strain in strands can be linked with a ratio ψ, which is L_p/c. The analytical model was proposed and developed regarding the ratio ψ. By conducting procedure of calculating ψ, the ψ value varies from 9.3 to 70.1. Multiple nonlinear regression analysis was performed in Software IBM SPSS Statistics 27.0.1 to derive equation of ψ. ψ equation was curved to be an exponential function, and the independent variable (X) is a linear function in terms of three variables of debonding level (λ), span length (L), and amount of strengthening material (A_s). The coefficient of determinate (R²) for curve fitting in nonlinear regression analysis is 0.8768. The developed analytical model was compared to the ultimate capacities computed by FEA model.

• Current Optics and Photonics
• /
• 제8권3호
• /
• pp.230-238
• /
• 2024

The refractive index is a key material-design parameter, especially for high-refractive-index glasses, which are used for precision optics and devices. Increased demand for high-precision optical lenses produced by the glass-mold-press (GMP) process has spurred extensive studies of proper glass materials. B₂O₃, SiO₂, and multiple heavy-metal oxides such as Ta₂O₅, Nb₂O₅, La₂O₃, and Gd₂O₃ mostly compose the high-refractive-index glasses for GMP. However, due to many oxides including up to 10 components, it is hard to predict the refractivity solely from the composition of the glass. In this study, the refractive index of optical glasses based on the B₂O₃-La₂O₃-Ta₂O₅-SiO₂ system is predicted using machine learning (ML) and compared to experimental data. A dataset comprising up to 271 glasses with 10 components is collected and used for training. Various ML algorithms (linear-regression, Bayesian-ridge-regression, nearest-neighbor, and random-forest models) are employed to train the data. Along with composition, the polarizability and density of the glasses are also considered independent parameters to predict the refractive index. After obtaining the best-fitting model by R² value, the trained model is examined alongside the experimentally obtained refractive indices of B₂O₃-La₂O₃-Ta₂O₅-SiO₂ quaternary glasses.