• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.179-193
• /
• 1994

In the development of engineering designs, decisions are required irrespective of the state of completeness and quality of information, and are formulated under conditions of uncertainty. Furthermore, under conditions of uncertainty the design invokes risks. Thus, in the design of the structures, the currently used deterministic design method does not provide a realistic assessment of the actual safety or the reliability of the structures. It is desirable that decisions required in The process of the design invariably must be made based on the reliability analysis. Properties of soil material are subject to more uncertainty than those of other structural material. In the field of soil mechanics and foundation engineering, it needed to develop reliability-based design methods. In order to simplify the reliability analysis or the reliability-based design process of the structures associated with the active earth pressure, it is necessary to find the variation and the distribution type of the active earth pressure calculated from the basic properties of soils. Monte Carlo simulation is performed to obtain the relationship between the variation of the active earth pressure for cohessionless soils calculated by using Rankine formula and the basic soil properties and the distribution type of the earth pressure. A series of regression equations obtained by utilizing the multi-linear regression analysis is suggested in this paper and the sensitivity of the basic soil properties to the variation of The earth pressure is investigated. The type of distribution of the active earth pressure was found to be the beta distribution in most cases or to be very similar to the beta distribution, if the basic soil variables are normally distributed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.2
• /
• pp.197-206
• /
• 2003

A three-dimensional (3-D) method of analysis is presented for determining the free vibration frequencies and mode shapes of solid and hollow hemispherical shells of revolution of arbitrary wall thickness having arbitrary constraints on their boundaries. Unlike conventional shell theories, which are mathematically two-dimensional (2-D), the present method is based upon the 3-D dynamic equations of elasticity. Displacement components μ/sub Φ/, μ/sub z/, and μ/sub θ/ in the meridional, normal, and circumferential directions, respectively, are taken to be sinusoidal in time, periodic in θ, and algebraic polynomials in the Φ and z directions. Potential (strain) and kinetic energies of the hemispherical shells are formulated, and the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies obtained by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Novel numerical results are presented for solid and hollow hemispheres with linear thickness variation. The effect on frequencies of a small axial conical hole is also discussed. Comparisons are made for the frequencies of completely free, thick hemispherical shells with uniform thickness from the present 3-D Ritz solutions and other 3-D finite element ones.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.130-139
• /
• 2017

The crop damage caused by strong wind was predicted using the wind speed data available from Korean Meteorological Administration (KMA). Wind speed data measured at 19 automatic weather stations in 2012 were compared with wind data available from the KMA's digital forecast. Linear regression equations were derived using the maximum value of wind speed measurements for the three-hour period prior to a given hour and the digital forecasts at the three-hour interval. Estimates of daily maximum wind speed were obtained from the regression equation finding the greatest value among the maximum wind speed at the three-hour interval. The estimation error for the daily maximum wind speed was expressed using normal distribution and Weibull distribution probability density function. The daily maximum wind speed was compared with the critical wind speed that could cause crop damage to determine the level of stages for wind damage, e.g., "watch" or "warning." Spatial interpolation of the regression coefficient for the maximum wind speed, the standard deviation of the estimation error at the automated weather stations, the parameters of Weibull distribution was performed. These interpolated values at the four synoptic weather stations including Suncheon, Namwon, Imsil, and Jangsu were used to estimate the daily maximum wind speed in 2012. The wind damage risk was determined using the critical wind speed of 10m/s under the assumption that the fruit of a pear variety Mansamgil would begin to drop at 10 m/s. The results indicated that the Weibull distribution was more effective than the normal distribution for the estimation error probability distribution for assessing wind damage risk.

• Horticultural Science & Technology
• /
• v.33 no.6
• /
• pp.807-811
• /
• 2015

This study was conducted to identify the air temperature factors that affect leafing date of mulberry (Morus alba) in Buan, Jeonbuk province. Over the period from 2009 to 2014, the leafing date averaged April 24 (114 Julian days). The earliest leafing date was April 12, in 2014, and the latest leafing date was May 2, in 2011. Yearly variations of daily mean temperature (DMT) and daily maximum temperature (DMxT) were high in the last part of March. There were highly negative correlations between leafing date and degree days of accumulated DMT above 0, 5, and $10^{\circ}C$ in the period from March 1 to April 10. Linear regression equations for estimating the leafing date were y = 153.8 - 0.1886 ${\times}$ ($r^2=0.965^{**}$) and y = 126.2 - 0.2246 ${\times}$ ($r^2=0.825^*$) for the degree days of accumulated DMT above $5^{\circ}C$ in the period from March 1 to April 10 and the last part of March, respectively. Therefore, leafing date of mulberry, which is important for popcorn disease control, is 96.5% predicted by degree days of accumulated DMT above $5^{\circ}C$ in the periods from March 1 to April 10.

• Korean Journal of Plant Resources
• /
• v.14 no.2
• /
• pp.133-138
• /
• 2001

This study was conducted to investigate the relationships between yearly variations of elimatic elements and yearly variations of productivity in potato. In addition, correlation coefficients among yield and yield components were estimated. The data of yield and yield components were investigated for 9 years from 1987 to 1995. The meteorological data what gathered at the Goheung Weather Station for the same period of crop growing season were used to find out the relationships between climatic elements and crop productivity. Yearly variation of the daily minimum temperature in March and April were large with coefficients of variation (C.V.) of 126.0%,368.0%, respectively, but the variation of the daily mean and maximum temperature in May and June were relative small. Stem length and number of stem show more C.V. of 9.3% ,14.3%, respectively, but the variation of the yield was relative small with 3.7%. Correlation coefficients between the amount of precipitation in April and yield, yield and daily mean temperature in June were negatively significant at the level of 5, 1%, respectively. Correlation coefficients between the growth habits and yield are positively significant at the level of 5, 1%, respectively. Simple linear regression equations by the least square method are estimated for stem length $(Y_1)$ and the precipitation in April(X) as $Y_1=82.47-0.11{\times}(R_2=0.3959)$, and for yield$(Y_2)$ and the precipitation in April(X) as $Y_2=2003.61-0.94{\times}(R_2=0.5418)$.

• Applied Biological Chemistry
• /
• v.27 no.2
• /
• pp.55-63
• /
• 1984

Lethal effect on Chinese radish Kimchi was investigated by using a pilot scale Kimchi pasteurizer. A simulation model was presented so as to predict the change in viable cell concentration of the Kimchi during pasteurization. D values of microorganisms in the Kimchi were found to be 2.21, 1.62, 0.73, 0.39 and 0.21min at 60, 64, 70, 75 and $80^{\circ}C$, correspondingly, and thereby z value was $19^{\circ}C$. One cycle time required was 0.99min at flow rate of 4 l/min. The ratio of lethality in preheating section to total lethality was 0.3 and the ratio of lethality in holding, precooling and cooling sections to total lethality was 0.7. The experimental data were in good agreement with the values simulated by two model equations to which linear and exponential temperature profiles were applied at $65^{\circ}C\;and\;70^{\circ}C$ in holding section.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.331-341
• /
• 2015

The main purpose of this study is reducing the cost and effort for characterization of tensile strength of fiber reinforced concrete, in order to use in structural design. For this purpose, in this study, test for fiber reinforced concrete was carried out. Because fiber reinforced concrete is consisted of diverse material, it is hard to define the correlation between mix proportions and strength. Therefore, compressive strength test and tensile strength test were carried out for the range of smaller than 100 MPa of compressive strength and 0.25~1% of steel fiber volume fraction. as a results of test, two types of tensile strength were highly affected by compressive strength of concrete. However, increase rate of tensile strength was decreased with increase of compressive strength. Increase rate of tensile strength was decreased with increase of fiber volume fraction. Database was constructed using previous research data. Because estimation equations for tensile strength of fiber reinforced concrete should be multiple variable function, linear regression is hard to apply. Therefore, in this study, we decided to use the ANN(Artificial Neural Network). ANN was constructed using multiple layer perceptron architecture. Sigmoid function was used as transfer function and back propagation training method was used. As a results of prediction using artificial neural network, predicted values of test data and previous research which was randomly selected were well agreed with each other. And the main effective parameters are water-cement ratio and fiber volume fraction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.4
• /
• pp.103-112
• /
• 1991

In this study, a numerical model was established and applied to simulate the steady-state groundwater and heat flow in an isotropic, heterogeneous, three dimensional aquifer system with uniform thermal properties and no change of state. This model was developed as an aid in screening large groundwater-flow systems as prospects for underground waste storage. Driving forces on the system are external hydrologic conditions of recharge from precipitation and fixed hydraulic head boundaries. Heat flux includes geothermal heat-flow, conduction to the land surface, advection from recharge, and advection to or from fixed-head boundaries. The model uses an iterative procedure that alternately solves the groundwater-flow and heat-flow equations, updating advective flux after solution of the groundwater-flow equation, and updating hydraulic conductivity after solution of the heat-flow equation. Dierect solution is used for each equation. Travel time is determined by particle tracking through the modeled space. Velocities within blocks are linear interpolations of velocities at block faces. Applying this model to the groundwater-flow system located in Jigyung-ri. Songla-myun, Youngil-gun. Kyungsangbuk-do, the groundwater-flow system including distribution of head, temperature and travel time and flow line, is analyzed.

• Journal of Broadcast Engineering
• /
• v.1 no.2
• /
• pp.176-187
• /
• 1996

This paper deals with the accurate estimation of 3- D pose (position and orientation) of a moving object with reference to the world frame (or robot base frame), based on a sequence of stereo images taken by cameras mounted on the end - effector of a robot manipulator. This work is an extension of the previous work[1]. Emphasis is given to the 3-D pose estimation relative to the world (or robot base) frame under the presence of not only the measurement noise in 2 - D images[ 1] but also the camera position errors due to the random noise involved in joint angles of a robot manipulator. To this end, a new set of discrete linear Kalman filter equations is derived, based on the following: 1) the orientation error of the object frame due to measurement noise in 2 - D images is modeled with reference to the camera frame by analyzing the noise propagation through 3- D reconstruction; 2) an extended Jacobian matrix is formulated by combining the result of 1) and the orientation error of the end-effector frame due to joint angle errors through robot differential kinematics; and 3) the rotational motion of an object, which is nonlinear in nature, is linearized based on quaternions. Motion parameters are computed from the estimated quaternions based on the iterated least-squares method. Simulation results show the significant reduction of estimation errors and also demonstrate an accurate convergence of the actual motion parameters to the true values.

• Korean Journal of Remote Sensing
• /
• v.34 no.5
• /
• pp.709-720
• /
• 2018

In order to optimize the evaluation of biomass in crop monitoring, accurate and timely data of the crop-field are required. Evaluating above-ground biomass helps to monitor crop vitality and to predict yield. Unmanned Aerial Vehicle (UAV) imagery are being assessed for analyzing within field spatial variability for agricultural precision management, because UAV imagery may be acquired quickly during critical periods of rapid crop growth. This study reports on the development of remote sensing techniques for evaluating the biomass of winter crop. Specific objective was to develop statistical models for estimating the dry weight of barley and wheat using a Excess Green index ($E{\times}G$) based Vegetation Fraction (VF) and a Crop Surface Model (CSM) based Plant Height (PH) value. As a result, the multiple linear regression equations consisting of three independent variables (VF, PH, and $VF{\times}PH$) and above-ground dry weight provided good fits with coefficients of determination ($R^2$) ranging from 0.86 to 0.99 with 5 cultivars. In the case of the barley, the coefficient of determination was 0.91 and the root mean squared error of measurement was $102.09g/m^2$. And for the wheat, the coefficient of determination was 0.90 and the root mean squared error of measurement was $110.87g/m^2$. Therefore, it will be possible to evaluate the biomass of winter crop through the UAV image for the crop growth monitoring.