• 소성∙가공
• /
• 제33권4호
• /
• pp.291-300
• /
• 2024

To compare the lubrication performance improvement of different laser texturing surface treatment patterns, ring-shaped specimens were prepared by processing line and dot patterns using a fiber laser device. Ring compression tests were conducted to compare the reduction rates of the inner diameter corresponding to the same height reduction of the specimens. Laser processing conditions were set to create patterns with a depth of 9㎛ and a width of 45㎛. Ring specimens were processed with varying spacings between dots and lines. The forging lubricant TECTYL FORM CF 351S was uniformly applied to the upper and lower compression tools, and the rings were compressed by 40% using a hydraulic press, after which the inner diameter was measured. The comparison of inner diameter reduction rates indicated that pattern processing improves lubrication performance, with line patterns being more effective than dot patterns in enhancing lubrication performance.

• 디지털콘텐츠학회 논문지
• /
• 제15권2호
• /
• pp.209-217
• /
• 2014

표 서식을 활용하고 있는 수많은 문서들을 종류에 따라 자동으로 분류하거나, 서식에 기입된 정보를 서식과 분리하여 추출하는 기술은 매우 중요하게 활용된다. 이를 위해서는 표 서식 구조를 정확하게 파악하는 과정은 필수적이다. 본 논문에서는 표 서식 문서 영상에 대한 유형별 꼭짓점 검출 방법을 제안한다. 주요 처리 과정은 전처리, 에지 블록 검출, 선분 에지 블록 검출, 꼭짓점 검출 단계를 거친다. 추출된 꼭짓점들은 선분 에지들이 다양한 형태로 직교하는 교차점들로 9가지 유형으로 분류된다. 실험에서는 제안한 방법을 세금계산서, 거래명세표, 표를 포함하고 있는 일반 문서 등과 같은 몇 가지 형태의 영상에 적용하여 99% 이상의 유형별 꼭짓점 추출 성능 결과를 보인다. 서식 문서 내에서의 대부분의 꼭짓점들은 대칭 형태로 존재한다는 사실을 고려할 때, 꼭짓점의 유형, 선분 에지의 폭 및 그들의 위치 관계를 활용하여 서식의 구조 분석에 활용 가능하다.

• 천문학회지
• /
• 제35권2호
• /
• pp.105-110
• /
• 2002

We present the results of VLA $NH_3$ (1,1) and (2,2) line observations of the young-stellar object (YSO) IRAS 19550+3248. The integrated intensity map of the $NH_3$ (1,1) line shows that there are two ammonia cores in this region; core A which is associated with the YSO, and core B which is diffuse and located at the northeast of core A. Core A is compact and elongated along the east-west direction (0.07 pc$\times$0.05 pc) roughly perpendicular to the molecular outflow axis. Core B is diffuse and extended (0.18 pc$\times$0.07 pc). $NH_3$ (2,2) line is detected only toward core A, which indicates that it is hotter (~ 15 K), presumably due to the heating by the YSO. The $NH_3$ (1,1) line toward core A is wide (${\Delta}v{\ge} 3 km s^{-l}$) and appears to have an anomalous intensity ratio of the inner satellite hyperfine lines. The large line width may be attributed to the embedded YSO, but the hyperfine anomaly is difficult to explain. We compare the results of $NH_3$ observations with those of previous CS observations and find that the CS emission is detected only toward core A and is much more extended than the $NH_3$ emission.

• 한국의류학회지
• /
• 제30권6호
• /
• pp.904-915
• /
• 2006

The purpose of this study is to develop and examine an in-line skating uniform that is also suitable for everyday wear, through research on the dressing needs of skaters. The results of this research are as follows: when asked about the garment, ordinary clothes were more inconvenient than professional uniform. In the case of the upper garment, the skaters who dressed in ordinary clothes felt the most inconvenience in the part of sleeve, back side of bottom and width. The skaters who dressed in professional in-line uniforms felt the most inconvenience in the part of neck girth, of sleeve, back side of bottom. In the case of the lower garment, the skaters who dressed in ordinary clothes felt the most inconvenience in the knee, crotch and hip. The skaters who dressed in professional in-line uniforms felt the most inconvenience in the hip and crotch. Damage due to wear was shown up the hip, knee, side of thigh and shoulder. The answer rate was high that the ordinary clothes usually wore out and the uniform used to tear out in the form of clothes damage. An appropriate sample pattern was made up, based on the problems revealed in the results of the questionnaire analysis. Evaluation of samples was used linear Measurement (5 point preference scale) by organized with 15 male and female's subjects group and 12 observer group.

• 한국세라믹학회지
• /
• 제41권4호
• /
• pp.313-322
• /
• 2004

후막 광식각 기술은 스크린 인쇄 등의 일반적인 후막공정에 노광 및 현상 등의 리소그라피 공정을 접목시킨 새로운 기술이다. 본 연구에서는 후막 광식각 기술을 이용하여 미세라인을 형성할 수 있는 저온동시소성용 Ag 페이스트를 개발하였다. 페이스트를 구성하는 Ag분말과 폴리머, 모노머, 광개시제 등의 양을 조절하여 미세라인을 형성할 수 있는 최적 조성을 연구하였으며. 또한 노광량과 같은 공정변수가 미세라인 형성에 미치는 영향을 연구하였다. 실험결과 폴리머/모노머비, Ag 분말 중량비, 광개시제의 양 등이 미세라인의 해상도에 영향을 미치는 주요 인자임을 확인할 수 있었다. 개발된 감광성 Ag 페이스트를 저온동시소성용 그린 시트에 전면 인쇄한 후 건조, 노광, 현상, 적층, 소성 과정을 통하여, 소성 후 20$\mu\textrm{m}$ 이하의 선폭을 가지는 후막 미세라인을 형성할 수 있었다.

• 대한전자공학회논문지SP
• /
• 제45권5호
• /
• pp.103-110
• /
• 2008

산업용 방사선영상으로부터 신뢰할만한 용접부위를 추출하는 것은 용접부의 결함을 검출하기 이전에 수행해야할 선행과제이다. 이 논문은 강판튜브 CR영상으로부터 용접특징 부위의 검출과 추출을 시도한다. 먼저 용접부위와 비용접부위로 구분된 샘플영상 160(개)를 통계 분석하여 두 부류 사이의 차이를 식별한다. 그 후 군집화 파라미터 결정을 위한 패턴분류 작업을 실시한다. 이 파라미터들은 간격, 함수부합정도 및 연속성이다. 관측된 용접영상을 선(線)별로 처리하되 각 선데이터군(群)에 가변 이동창을 적용하여 구역을 선점한다. 각 창을 구성하는 데이터의 직접 및 비용접부위 귀속여부는 국부확률선군집화 방식을 적용하여 분류한다. 순차적 과정을 거쳐 매 단계마다의 경계치 산출에 의해 두 영역 사이의 경계선을 추적하며 그 결과 용접 특징부위를 추출한다. 그리고 CR용접영상 실험을 통해 그 효과를 입증한다.

• 한국지구과학회지
• /
• 제38권1호
• /
• pp.1-10
• /
• 2017

공생별 AG Peg는 적색거성(GS)과 백색왜성(WD)으로 구성된 성운으로 둘러싸인 쌍성계이다. AG Peg의 분광자료는 1998년, 2001년, 그리고 2002년의 세 시기에 미국 Lick 천문대에서 관측한 자료로 HI 발머 방출선 자료를 분석하였다. AG Peg의 선세기와 폭은 각 시기에 따라 변하는데, $H{\alpha}$와 $H{\beta}$ 선에서 모두 청색편이, 적색편이, 넓은 폭 성분이 나타났다. 가스 성운의 운동학적 특성을 보여주는 방출선은 WD주변에 형성된 강착원반의 반경이 매우 큼을 보여준다. 관측자의 시선 방향을 고려하면, 1998년 관측은 AG Peg의 GS와 WD가 나란히 하늘에 있는 반면, 2002년에는 WD가 GS의 전면에, 2001년에는 WD가 GS의 뒷면에 위치하였다. 이러한 상대적인 위치와 분광선의 변화를 고려하여, 우리는 GS에서 WD로의 가스유입이 지속적으로 이루어지고, 그 결과 형성된 두꺼운 원반의 회전이 관측된 분광선 윤곽의 형성을 가져온 것으로 결론지었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권4호
• /
• pp.9-12
• /
• 2019

We performed Raman spectroscopy on two different over-doped Bi₂Sr₂CaCu₂O_8+x (BSCCO), of which superconducting transition temperatures are 89 K and 77 K. Line-shape analysis of the Raman-spectrum was done, focused on B_1g bond buckling mode which have drawn a lot of attention, since photoemission studies showed an evidence for strong coupling between the mode and electron. The line-shapes show asymmetry and are well fitted by the Fano line-shape formula. Remarkably, we found that the peak line-widths from B_1g bond buckling mode in BSCCO show much broader than those in YBa₂Cu₃O_7-x. The broad line width can be attributed to the superstructure modulation of BSCCO. Our results imply that B_1g bond buckling mode may have close relation to the origin of superconductivity or to boosting the superconducting transition temperature in BSCCO.

• 복식
• /
• 제63권6호
• /
• pp.140-149
• /
• 2013

The study aims to suggest new skirt designs through a modernistic application of the silhouette of Hanbok skirts. It also aims to promote the aesthetic beauty and excellence of Hanbok to the world by using Hanbok skirts that best express the beauty of Korea as motifs, and to promote a pride in Korean culture through a reinterpretation of Hanbok skirts. The study was focused on examining Hanbok skirts from the Three Kingdoms era to the Joseon Dynasty, and the skirts in each era were compared to western silhouettes to suggest design centering on the characteristics of each silhouette. As for the theoretical background, shapes were classified according to waist-grip, the width and length of a skirt, wrinkles and ornamental lines, before being compared to skirt silhouettes of western costume. As a result, it was found that Hanbok skirt silhouettes in the Three Kingdoms era were similar to the A-Line silhouette of western costume, the Empire silhouette of unified Silla, the H-Line silhouette of the Goryeo Dynasty, the Bell-Line silhouette of the Joseon Dynasty and the Bustle Style applied to ceremonial costume in the early Joseon Dynasty. The researcher suggested five skirt designs by applying the above-mentioned five silhouettes, confirming the research premise that Hanbok skirt silhouettes are as diversified as those found in western costume. Designs were suggested for each silhouette, and are expected to lead to the development of designs befitting future trends and concepts through detailed research and development on Hanbok skirt silhouettes.

• 한국의류학회지
• /
• 제15권4호
• /
• pp.341-349
• /
• 1991

This study was done to provide basic data for clothing design and thus to contribute to the academic development of the clothing and textile area. The focus of this study was to charac­terize the somatotype based on each individual's lateral view. For this purpose, firstly, categorization of the subjects based on their lateral view and definition of each category, secondly, characterization of each somatotype, and thirdly, sugges­tion of the deterministic criteria of each category were complished. The subjects in this study were female college students of 18 to 26 year-old whose somatotypes were comparatively invariable after cessation of physical growth. The metrical items characterizing upper body lateral view were chosen. Data were collected through Anthropometry and Photometry and analyzed by Factor analysis. The results were as follows; 1. Each subject's side view contour was classified as straight type, lean-back type, bend­forward type, and swayback according to its position to the relative plumb line. Straight type was defined as the type in which the plumb line passes through the lobe of the ear, the shoulder joint, and the mid abdominal region laterally. Lean-back type positioned the plumb line more posteriorly than straight type. Bend-forward type positioned the plumb line more anteriorly than straight type. Swayback positioned the plumb line at about the same line as straight type. And curvature of side view contur was more prominent in this type than in straight type. 2. Seven factors were figured out. The first factor was representing upperbody volume, and the second factor was representing size, the third factor was horizontal distance from lateral view representing size view contour. The fourth factor was front body length, the fifth factor was back body length. The sixth factor was shoulder length and shoulder width representing shoulder shape. The seventh factor was the bust shape.