• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.412-416
• /
• 2005

In this paper we propose low-impedance and miniaturized a wilkinson power divider on MMIC passive component which was fabricated by a novel microstrip line structure employing periodically perforated ground metal (PPGM). The novel microstrip line structure showed much lower impedance and shorter guided-wavelength than conventional one. Using the novel microstrip line with periodically perforated ground metal, a miniaturized 17 ${\Omega}$ power divider was fabricated. The line width of the power divider was 20 ${\mu}m$, and the size of it was 0.110 $mm^2$, which is 21 % of conventional one. The power divider exhibited good RF performances from 10 to 20 GHz.

• Journal of the Korean Statistical Society
• /
• 제34권1호
• /
• pp.49-60
• /
• 2005

In this paper we introduce a nonparametric method for estimating the probability density function of detection distances in line transect sampling. The estimator is obtained using a frequency histogram density estimation method. The asymptotic properties of the proposed estimator are derived and compared with those of the kernel estimator under the assumption that the data collected satisfy the shoulder condition. We found that the asymptotic mean square error (AMSE) of the two estimators have about the same convergence rate. The formula for the optimal histogram bin width is derived which minimizes AMSE. Moreover, the performances of the corresponding k-nearest-neighbor estimators are studied through simulation techniques. In the absence of our knowledge whether the shoulder condition is valid or not a new semi-parametric model is suggested to fit the line transect data. The performances of the proposed two estimators are studied and compared with some existing nonparametric and semiparametric estimators using simulation techniques. The results demonstrate the superiority of the new estimators in most cases considered.

• 한국염색가공학회지
• /
• 제19권2호
• /
• pp.24-31
• /
• 2007

This paper addresses factors of line image quality on grain leather printed via inkjet printer. Lines were printed onto coated leather media, and line width, edge blurriness, and edge raggedness were evaluated for line image quality. Various factors influenced to wetting and capillary wicking were studied and found out that wicking through capillary between fibers causes significant feathering on leather surface similar with pulp capillary in copy Paper. Polyurethane and acrylic resin coating resulted good image qualify by reducing capillary wicking. The mixture of polyurethane and acrylic resin applied on grain leather satisfied with both image quality and surface hand. $AllWrite^{TM}$ ink brought best results of image quality, comparing with $VeraPrint^{TM}$ ink and $JetWrite^{TM}$ ink.

• 천문학회보
• /
• 제36권2호
• /
• pp.63.1-63.1
• /
• 2011

In understanding AGN physics, it is fundamental to determine black hole masses. Based on the gas kinematics of the broad-line region, black hole masses can be derived from the product of the width of the broad emission lines and the continuum/line luminosities. For a sample of 37 intermediate-luminosity AGN at z~0.4, we obtained high quality spectra (S/N~100) using the Low Resolution Imaging Spectrometer(LRIS) at the KECK telescope, in order to calibrate various black hole mass estimators based on the Mg II (2798A), the $H{\beta}$ (4861A), and the $H{\alpha}$ (6563$\bar{A}$) emission lines. Based on our multicomponent fitting analysis, we subtract continuum, FeII emission, and host galaxy starlight, reducing systematic errors in measuring emission line widths. Combining low S/N SDSS spectra with our high S/N keck spectra, we determine a set of ~30 black hole masses of the sample for each emission line. Then by comparing various sets of black hole masses, we internally calibrate each mass estimators and investigate uncertainties and limitations of each mass estimator.

• 한국통신학회논문지
• /
• 제23권6호
• /
• pp.1425-1432
• /
• 1998

The propagation properties of Gaussian pulse signals on the microstrip line are investigated by the Kirschning & Jansen's approximated equation to meet the frequency range of a pulse, accuracy, and geometrical requiremtns of the microstrip line. The dispersion of pulse signals is analyzed regarding to the relative permittivity .epsilon.$_{r}$, substrate height h and strip width w of the microstrip line. To verify theoretical results, several samples of 50.OMEGA. microstrip lines are fabricated. And the characteristics of pulse propagation along these lines are simple measured using VNA(Vector Network Analyzer) with time-domain analysis function. A fairly good agreement has been found between the measured pulse waveforms and computer simulations.

• 한국전기전자재료학회논문지
• /
• 제21권4호
• /
• pp.289-295
• /
• 2008

In this paper, we designed the off-line PWM(Pulse width modulation) control IC for flyback type power converter to reduce the standby power consumption. In normal state, this off-line PWM IC generates the output pulse with $40\sim60kHz$ frequency and duty ratio of $20\sim88%$. When SMPS operates in standby mode, this IC generates the output pulse with 33kHz frequency and duty ratio of 1 %. SPICE simulation was performed to verify the standby power consumption of the power converter with designed of-line PWM IC. Power converter with designed off-line PWM IC consumes less than 0.3W when it operates in standby mode condition.

• 한국통신학회논문지
• /
• 제15권3호
• /
• pp.232-242
• /
• 1990

외부 평면파에 의해 유기되는 단일 전송선로의 EMI(Electromagnetic Interference) 전류에 관한 Smith의 해석법을 이용하여 연쇄 접속된 전송선로의 부하 EMI전류를 구한다. 동일한 특성 임피던스를 갖는 선로가 연쇄 접속 되었다는 가정하에 수치계산을 하여 Smith의 연구 결과와 비교한 결과 두 결과가 잘 일치함을 확인하였으며, 선로의 폭과 길이가 각각 1/10로 줄어들면 부하 EMI 전류는 약 40dB 정도 감소함을 알 수 있었다.

• 한국자기공명학회논문지
• /
• 제19권1호
• /
• pp.11-17
• /
• 2015

The Kubo formalism and utilizing the projection operator technique (POT) introduced by Kawabata, the electron spin resonance (ESR) line-shape formula for carbon nanotubes through the hyperfine interaction introduced earlier in terms of POT. We can see that the line-width decreases exponentially as the temperature increases. The spin relaxation time show gradual decrease as magnetic field becomes larger. The analysis reveals the peculiarities in spin relaxation inherent to one dimensional system at low temperature and weak magnetic fields. Thus, the present technique is considered to be more convenient to explain the carbon nanotubes as in the case of other optical transitions.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.330-331
• /
• 2020

In this paper, we propose a new three-dimension space vector pulse width modulation for three-phase four-wire inverter under line-to-line fault. In order to this method, the processes of selecting of the output voltage vectors and synthesizing the reference voltage vector are discussed. In addition, we deal with the calculation of the duty cycles for each sector. The experiments are provided to validate the effectiveness of the proposed method.

• 대한전자공학회논문지
• /
• 제9권2호
• /
• pp.1-16
• /
• 1972

본논문은 특성임퍼이던스가 선형적으로 변화하는 단일 Strip선로의 특성파라미터를 이용하여, 우선 even-mode 및 odd-mode임피이던스가 모두 선형적으로 변화하는 비대칭형인 결합Strip선로의 특성파라미터를 구하였다. 다음에는 상기한 비대칭결합Strip선로를 종속연결한 대칭형결합Strip선로를 구성하고, 선로단자조건에 따라서 결합Strip선로가 갖는 여파특성을 고찰하였다. 선형 결합Strip선로의 특성을 해석한 결과, 선형결합Strip선로는 균일Strip선로를 사용하는 경우에 비하여 몇가지 점에서 좋은 여파특성을 갖고 있음을 명시하였다.