• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.548-553
• /
• 2000

A new design of cylindrical capacitive sensor(CCS) for the displacement measurement of precision active magnetic bearing(AMB) spindle is presented in this paper. This research is motivated by the problem that existing 4-segment CCS is still sensitive to the $3^{rd}$ harmonic component of the geometric errors of a rotor. The procedure of designing new CCS starts from the modeling and error analysis of CCS. The angular size of CCS is set up as a design parameter, and new 8-segment CCS is introduced to possess an arbitrary angular size. The optimum geometry of CCS to minimize the effect of geometric errors is determined through minimum norm approach. Experimental results with test rotors have confirmed the improvement in geometric error suppression.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.452-459
• /
• 1997

For computer aided design and construction of low noisy power plants, indoor and outdoor noise prediction program has been developed. The program utilizes the predefined data of noise sources and building materials and has the faculty to estimate the source level using the empirical formula in case of the measured data not being available. In the noise prediction, the mutual noise propagation between indoor and outdoor sites are considered. The outdoor noise source in the calculation of geometric divergence effects is modelled as the omni-directional finite line or planar source according to the source geometry and the receiving points. Outdoor noise prediction is carried out to consider the diffraction effect due to plant structures as well as the attenuation effect due to atmospheric absorption and soft ground. The results of indoor and outdoor noise prediction for a recently constructed diesel engine power plant show good agreement with the measured.

• International Journal of Automotive Technology
• /
• 제7권6호
• /
• pp.721-728
• /
• 2006

This paper is concerned with development of digital assembly cell. Automotive industries, try to find out new welding technologies to replace the existing spot welding which is not appropriate anymore. Because of many advantages like good accessibility, welding quality and fast welding speed, laser welding seems the most appropriate solution for automobile manufactures. To apply this technology to welding of car body, experiments must be conducted according to material, geometry and layer in welding area. Based on the data of these experiments, the laser welding process and the quality of stitches are identified. And then, the comparison between the requirements of welding and the potential of equipments allows selecting the best equipments. By using the digital manufacturing, the configurations of laser welding cell are carried out. After all, the optimal laser welding cell is chosen by the evaluation of alternative cells with technical and organizational criteria.

• 한국통신학회논문지
• /
• 제21권2호
• /
• pp.347-356
• /
• 1996

In this paper, we present the circular array structure for estimating the temporal and spatial specturm of multiple narrowband incoherent signals which have different frequencies. The conventional linear array is computationally demanding for simultaneously estimating the spatial and temporal spectrum since it requires the tapped delay line filer. The statistical performance of the circular array is never deteriorated eve though it requires much less computational load than the uniform linear array. Especially, it is shown that the circular array resolves the direction-of-arrivals of the multiple signals without the spatial and temporal aliasing the fundamental nonuniform-sampling property prossessed by it. Computer simulation results are shown to demonstrate the better performance achieved with the circular array geometry relative to that obtained with a uniform linear array with taps.

• Journal of Welding and Joining
• /
• 제23권4호
• /
• pp.53-58
• /
• 2005

We designed a weld monitoring system with UV and IR sensors using a embedded DSP controller for implementing a distribution system; running stand alone and communication with outside by industrial standard protocols. Also this system provided a USB port in order to be acquiring data in PC. The user interface program in PC visualized the IR and W data in time, frequency and state space. A correlation of IR and UV signals showed closely related to weld quality. A rapid change of geometry can be found through a moving average filter. And the average value of IR signal at an interval represented a welding width and depth. Through these results, we proposed a monitoring algorithm for a integer type DSP.

• International Journal of Contents
• /
• 제11권3호
• /
• pp.63-68
• /
• 2015

A novel unit cell for a high pass filter was designed based on a composite right/left-handed structure that uses a folded coplanar waveguide. The equivalent circuit model for the unit cell was extracted from the geometry of the unit cell, and the effect of each main parameter of the unit cell was analyzed. The equations to calculate the immittance values of the equivalent circuit elements were formulated, and moreover, the dispersion characteristics and energy the distributions of the electromagnetic fields were simulated to determine the characteristics of the composite right/left-handed structure. Finally, the high pass filters were implemented as a series of the proposed unit cells. We show that the experimental results were in good agreement with those obtained from the simulation. Thus, the high pass filter was found to achieve a baseband insertion loss of 3 dB and a stopband attenuation of 70 dB.

• Journal of applied mathematics & informatics
• /
• 제11권1_2호
• /
• pp.1-57
• /
• 2003

Vector fields in three-space admit bundles of internal variables such as a Heisenberg algebra bundle. Information transmission along field lines of vector fields is described by a wave linked to the Schrodinger representation in the realm of time-frequency analysis. The preservation of local information causes geometric optics and a quantization scheme. A natural circle bundle models quantum information visualized by holographic methods. Features of this setting are applied to magnetic resonance imaging.

• Structural Engineering and Mechanics
• /
• 제62권2호
• /
• pp.179-196
• /
• 2017

The paper focuses on dynamic analyses of a series of simply-supported symmetric composite steel-concrete bridges loaded by an ICE-3 train moving at high speeds up to 300 km/h. The series includes five bridges with span lengths ranging from 15 m to 27 m, with repeatable geometry of the superstructures. The objects, designed according to Polish standards valid from 1980s to 2010, are modelled on the bridges serviced on the Central Main Line in Poland since 1980s. The advanced, two-dimensional, physically nonlinear model of the bridge-track structure-high-speed train system takes into account unilateral nonlinear wheel-rail contact according to Hertz's theory and random vertical track irregularities equal for both rails. The analyses are focused on the influence of random track irregularities on dynamic response of composite steel-concrete bridges loaded by an ICE-3 train. It has been pointed out that certain restrictions on the train speed and on vertical track irregularities should be imposed.

• 한국기계가공학회지
• /
• 제9권1호
• /
• pp.74-80
• /
• 2010

The purpose of reverse engineering design using 3D measurement data is an accurate reconstruction of real body. In oder to accomplish this object, it is important that creating exact extracting edges should be studying out first of all. This study used edge-based method to find out edge point from the measuring point data. The characteristics are analysed using the mean curvature block method on the fitting NURBS curve and defined edges through block removal condition. The results showed that only using the NURBS curve of maximum curvature analysis to define correct edge of real geometry is limited, but this segmentation approach provides simplified necessary condition for edge classification, and an effectiveness to classify a straight line, curves and fillets etc.

• 제어로봇시스템학회논문지
• /
• 제7권12호
• /
• pp.1024-1030
• /
• 2001

In this paper, a horizontal LOS(line of sight) rate estimator for conventional sea skimming ASM(anti-ship missile) is proposed. A LOS rate dynamics model for a 2-axis gimbal system and the homing geometry is derived. A new LOS rate estimator is proposed by applying the Kalman filter theory to the LOS rate dynamics model. The proposed filter estimates LOS rates by taking roll motions into account. Simulation results show that the proposed filter produces smaller estimation errors than a conventional method.