• 대한조선학회논문집
• /
• 제40권4호
• /
• pp.8-15
• /
• 2003

This paper presents the method for developing an optimum hull form with minimum wave resistance using SQP(sequential quadratic programming) as an optimization technique. The wave resistance is evaluated by a Rankine source panel method with non-linear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of the hull surface is represented and modified using B-spline surface patches. The optimization method is applied to Series 60 hull and KCS(KRISO 3600 TEU Container Ship). The obtained results prove that the method is appropriate for preliminary hull form design.

• International Journal of Ocean System Engineering
• /
• 제3권1호
• /
• pp.1-9
• /
• 2013

A design procedure for a ship with minimum resistance had been developed using a numerical optimization method called SQP (Sequential Quadratic Programming) combined with computational fluid dynamics (CFD) technique. The frictional resistance coefficient was estimated by the ITTC 1957 model-ship correlation line formula and the wave-making resistance coefficient was evaluated by the potential-flow panel method with the nonlinear free surface boundary conditions. The geometry of the hull surface was represented and modified by B-spline surface modeling technique during the optimization process. The Series 60 ($C_B$=0.60) hull was selected as a parent hull to obtain an optimized hull that produces minimum resistance. The models of the parent and optimized hull forms were tested at calm water condition in order to demonstrate the validity of the proposed methodolgy.

• Journal of electromagnetic engineering and science
• /
• 제10권3호
• /
• pp.150-157
• /
• 2010

We proposed a $4{\times}8$ array antenna with aperture-coupled patch antenna elements. The antenna was designed for 60 GHz operation and fabrication on the low-temperature cofired ceramic(LTCC) substrate($\varepsilon_r$=5.8). The feedline with the stub was designed to enhance the radiating element bandwidth and the transition characteristics between the waveguide (WG) and microstrip line(MSL). Through the optimization of the antenna and feedline geometry, the antenna gain and the performance of the 10 dB bandwidth were 20.2 dBi and 13 % up, respectively. The measured results agreed with the simulated ones.

• International Journal of Automotive Technology
• /
• 제1권1호
• /
• pp.26-34
• /
• 2000

The new numerical procedure for hydroplaning has been developed by considering the following three important factors; fluid/structure interaction, tire rolling, and practical tread pattern. The tire was analyzed by FEM with Lagrangian formulation and the fluid is analyzed by FVM with Eulerian formulation. Since the tire and the fluid are modeled separately and their coupling is automatically computed by the coupling element, the fluid/structure interaction of the complex geometry such as the tire with the tread pattern can be analyzed practically. We verified the predictability of the hydroplaning simulation in the different parameters such as the water flow, the velocity dependence of hydroplaning, and the effect of the tread pattern on hydroplaning. In order to predict the streamline in the contact patch, the procedure of the global-local analysis was developed. Since the streamline could be predicted by this technology, we could develop the new pattern in a short period based on the principle; "make the stream line smooth".

• 소음진동
• /
• 제7권4호
• /
• pp.621-629
• /
• 1997

For computer aided design and costruction of low noisy power plants, indoor and outdoor noise prediction program has been developed. The program utilizes the predefined data of noise sources and building materials and has the faculty to estimate the source level using the empirical formula in case of the measured data not being available. In the noise prediction, the mutual noise propagation between indoor and outdoor sites are considered. The outdoor noise source in the calculation of geometric divergence effects is modelled as the omni-directional finite line or planar source according to the source geometry and the receiving points. Outdoor noise prediction is carried out to consider the diffraction effect due to plant structures as well as the attenuation effect due to atmospheric absorption and soft ground. The results of indoor and outdoor noise prediction for a recently constructed diesel engine power plant show good agreement with the measured.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.542-544
• /
• 1997

The analysis of distribution line faults is essential to the proper protections in the power system. A high impedance fault does not make enough current to cause conventional protective devices. In this paper, Fractal dimensions are estimated for distinction between normal status and fault status in the power system. Application of the concepts of the fractal geometry to analyze chaotic properties of high impedance fault current was described. In addition, to analyze variation of fault current and normal current on phase plane, embedding state variables are reconstructed from 1 dimensional time series.

• 한국실내디자인학회논문집
• /
• 제38호
• /
• pp.48-56
• /
• 2003

This study is purposed to find the transition of the perspective connected with visual modality. The perspective based on Greek optics and euclidean geometry and rediscovered in Renaissance represents the object according to the particular moment and the point of view, is a principal fact which affect architecture, the form of a city and the spatial organization and symbolizes an ideal of the times. It embodied perception which treats the space rationally on the basis of realism and became visual modality based on the separation of the seeing subject and the world of the object. The point of view became one with the vanishing point which made up the shape and after Renaissance for four hundred years a straight line, a right angle and a circle got to be favorite geometrical choices in architecture. A fixed point of view of the subject is getting to change and break up fundamentally by the new visual technologies of the modem times.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2165-2172
• /
• 1995

Optimization of mesh discretization has been proposed to improve the accuracy of limit analysis solution of collapse load by using the Rigid Body Spring Model(R. B. S. M) under the plane strain condition. Moreover, the fracture behaviour of materials was investigated by employing the fracture mechanism of a spring connecting the triangular rigid body element. It has been clarified that the collapse load and the geometry of slip boundary for optimized mesh discretization were close to those of the slip line solution. Further, the wedge-shaped fracture of a cylinder under a lateral load and the central fracture of a strip in the drawing process were well simulated.

• 대한기계학회논문집B
• /
• 제33권10호
• /
• pp.789-796
• /
• 2009

Microdroplet deposition in a micro-groove is studied numerically. The droplet shape is determined by a level-set method which is improved by incorporating a sharp-interface modeling technique for accurately enforcing the matching conditions at the liquid-gas interface and the no-slip and contact angle conditions at an immersed solid surface. The computations are carried out to investigate the droplet behavior derived by the interfacial characteristics between the liquid-gas-solid phases. The effects of contact angle, impact velocity and groove geometry on droplet deposition in a micro-groove are quantified.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2001년도 학술발표회 발표논문집
• /
• pp.246-251
• /
• 2001

This study is aimed to develop system that can export height automatically with Hierarchical Delaunay Triangulation and finally provide profile of hydraulic channel using 3D terrain geometry model. In this study, by using the object-oriented technique, we developed the traverse and cross-section design system of agricultural facilities, which maintain a consistency in the irrigation design process. This system can design the traverse and cross-section profile for the line type facilities. The results of this study, as for the design based on geography, after carrying out the modeling by using TIN of which employs Delaunays algorithm, it was found that the latitudinal design of the facility is feasible. And, as for the formulation of TIN, we obtained more precise result from using contour, stream, and road data rather than using the contour by itself.