• 한국수소및신에너지학회논문집
• /
• 제11권1호
• /
• pp.43-49
• /
• 2000

현재 증기나 온수에 의한 열수송은 배관을 통하여 열손실 및 마찰손실 등이 발생하므로 수송거리는 3 내지 5km가 한계이다. 그러나 대부분의 공단이 도시지역에서 10km 이상 떨어져 있으므로 이들 지역에서 발생되는 폐열을 적절히 활용하기 위해서는 새로운 열수송 시스템이 개발되어야 한다. 수소저장합금은 수소를 흡수 또는 방출하면서 발열반응과 흡열반응을 일으키는 특성을 가지고 있으므로 산업공단지역의 폐열로부터 수소저장합금의 수소를 방출시키고, 이 수소를 인근 도시지역에 파이프라인으로 수송한 후 필요시 또 다른 수소저장합금과 반응시켜 열을 얻을 수 있다. 이 시스템에서는 난방의 목적 외에도 수소의 흡수 방출온도가 낮은 합금을 이용하여 냉열을 얻을 수도 있다. 따라서 수소저장합금은 폐열의 저장이나 열수송의 수단으로 활용할 수 있다. $MmNi_{4.5}Al_{0.5}Zr_{0.003}$, $LaNi_5$, $Zr_{0.9}Ti_{0.1}Cr_{0.6}Fe_{1.4}$, $MmNi_{4.7}Al_{0.1}Fe_{0.1}V_{0.1}$ 합금들이 열수송에 적합한 합금으로 선정되어 그 특성을 검토하였으며, 열수송시스템의 설계 및 제어기술에 대하여 검토하였다.

• 농업과학연구
• /
• 제25권2호
• /
• pp.260-270
• /
• 1998

본 연구는 합리적인 침하계측관리의 수립을 위하여 현재 시공중인 사업부지를 선정하여 연약지반에 성토시 안정성에 미치는 영향을 현장계측결과를 기초로 기존의 안정평가 방법등과 비교분석하여 성토에 따른 지반의 복합적인 거동을 구명하고 연약지반의 안정평가 기법을 제시하고자 한 것으로 연구결과를 요약하면 다음과 같다. 1. 물리적 성질이 심도별로 최대치를 나타내며 변곡점이 형성되는 부분에서 수평변위가 급증하여 위험가능성이 있으므로 안정관리분석시 기초자료로 이용할 수 있고, 수평변위량의 차가 가장 큰 부분에서 전단변형이 발생되었다. 2. 단계성토에 따른 계측자료를 이용하여 성토체의 안정성을 비교분석 한 결과, 파괴기준선을 초과하여 위험치에 접근하는 부분도 있었으나 성토체는 안정한 것으로 확인되어 안정관리상 파괴기준선으로 안정성을 판단하는 것보다는 곡선의 기울기로 판단하는 것이 합리적이라고 판단된다. 3. 처리지반에서의 수평변위와 상대침하량은 거의 같은 비율을 유지하면서 증가하며, 무처리 지반에서 Terzaghi 수정지지력을 사용할 경우의 전단변형은 성토하중과 비배수 전단강도와의 관계를 고려하고 안전율은 1.2보다 큰 값을 사용하여야 할 것으로 판단된다. 4. 과잉간극수압은 성토시공높이에 따라 상승되고 방치기간에 따라서 감소되며, 성토높이가 관리기준치를 초과하면 과잉간극수압은 급격하게 증가되어 불안정한 상태가 되고 과잉간극수압과 수평변위량의 움직임은 거의 일치하고 있으므로 성토의 시공속도를 조절하는데 판단기준으로 이용할 수 있다.

• 한국자기학회지
• /
• 제8권5호
• /
• pp.300-307
• /
• 1998

Co90Fe10 단일박막층은 고진공 RF magnetron sputtering 장비를 이용하여 여러 가지 기판(glass, Si, polyimide) 위에 적층되었고 ~1000$\AA$ 두께를 가진 Co90Fe10 박막은 우수한 고주파 자기특성을 나타내었다. 10$\times$[100 nm co90Fe10/ 100 nm SiO2] 다층 박막의 자화값은 예측된 값과 거의 일치하였으며 Han값(=124 Oe)도 예측된 30$\leq$Han$\leq$125 Oe 범위 내에 있음을 알 수 있었다. 자성 다층 박막의 자화율(=$\mu$,=$\mu$,-j$\mu$r")의 주파수 특성은 자성 다층 박막과 도체로 이루어진 층상구조를 갖는 microstrip line을 network analyzer에 연결하여 전송 특성(S11, S21 파라미터)을 측정함으로써 얻어졌다. $\mu$,"의 주파수 특성은 S-파라미터로 분석되는 magnetic absorption으로부터 얻어졌다. 또한 $\mu$r'의 주파수 특성은 Kramers-Kronig 관계식을 사용하여 $\mu$r"의 주파수 특성으로부터 계산되었다. 이와 같이 얻어진$\mu$r의 주파수 특성 (static 자화율, 공진 주파수)은 계산에 의해서 얻어진 값들과 잘 일치된다는 것을 확인하였다.일치된다는 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1759-1761
• /
• 2004

In this paper, we studied on life-decision of underground cable of live-line state. Data of CV 6.6kV and 22kV cable's life is got data measured insulation resistance by D.C. overlapped current. We confirmed that D.C resistance reduced by time. Aging of cable could be occurred by electrical, thermal, mechanical stress and complex aging confirmed that proceeded by Weibull plot. In the result, life of 6.6kV cable remained 21 years till light caution and 35 years till heavy caution, so aging of 6.6kV XLPE cable was not occurred. Life of 22kV cable remained 10 years till light caution and 22 years till heavy caution. We confirmed that the designed life of 22kV cable is similar to the measured life.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1299-1303
• /
• 1995

The detection and measurement of partial discharge activity prevalent in the solid insulating systems of high-voltage generator stator windings has, for many years, been a recognized method of assessing the insulation condition of such systems. Partial discharge activity occurs at sites of degradation within, or at the surface of, stator's insulation systems under high voltage stressing. However, partial discharge pulses suffer from attenuation and distortion when transmitted along windings, because of the complex L-C network between windings. The mode of transmission varies with the signal frequency and is dependant on the geometrical configurations of windings. This paper reports the investigated results of the signal propagation characteristics along the windings when both sinusoidal signals and simulated partial discharge pulses are injected at the various positions of stator windings within the 25 MVA, 11 kV hydro generator. The on-line identification technique of partial discharge location in generator windings is also proposed in this study.

• Journal of Evidence-Based Herbal Medicine
• /
• 제2권1호
• /
• pp.19-24
• /
• 2009

GD68 is newly developed herb complex prescription. The constituent herbs of GD68 were Massa Medicata Fermentata, Atractylodis Rhizoma Alba, Poria, Zingiberis Siccatum Rhizoma, Crataegi Fructus, Saccarum Granorum, Agastachis Herba, Taraxaci Herba, Perillae Herba, Scutellariae Radix, Astragali Radix, Ginseng Radix, Houttuyniae Herba and Halloysitum Rubrum. The aim of this study was to examine feed value of GD68 in duck. The weight gain of ducks fed with supplemental GD68 high compared to those of the control. The feed intake and mortality of ducks fed with supplemental GD68 low compared to those of the control. The moisture, crude lipid and calorie content of the ducks fed GD68 were decreased, but the crude protein content of the ducks fed GD68 was increased. And we investigated the effect of GD68 on the production of cytokines in human T-cell line, MOLT-4 cells. GD68 plus concanavalin A (Con A) increased the interferon-$\gamma$ and interleukin-2 production compared with Con A alone. These results indicate that the supplemental GD68 may improve the production, meat quality and immunity of ducks.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.505-510
• /
• 2011

The railroad freight transport has great merits that can transport mass and specific items(dangerous goods), but it takes a long time because of low accessibility to the logistics facility and the complex process of loading freight in middle station. This paper analyzed volumes and characters of each railroad freight item, and was carried out the effect of applying E&S system to Gyeongbu line containers to find the method of reducing transport time and effective container transportation. As a result of Cost-Effectiveness analysis, the block train(B/T) is reducing transport time more about 1~2 hours. The road congestion cost is saving about 2.2 billion won. And due to skipping work of organizing train, personnel and equipment expenses savings expected about 9 billion won. It is expected that the E&S system enhances the container transport service and has an effect positive influence on making a efficient method of transport. But It is necessary to estimate pre-feasibility of applying E&S system that the standard of estimating cost and benefit is required further examination.

• 대한의생명과학회지
• /
• 제19권2호
• /
• pp.132-141
• /
• 2013

Mycobacterium isolates were retrospectively identified, antibiotics susceptibility test results and basic clinical data were analyzed for the 715, excepted 308 in 1,023 specimens, from a mycobacterial laboratory at a tertiary care hospital from September 2002 to December 2008. Their male to female ratio was 1.12 to 1 (379 male, 336 female). The median age of study population was 47 years (range from 10 to 93 years). Distribution of Mycobacterium species was 90.1% of total were isolates Mycobacterium tuberculosis, and 9.9% of the total non-tuberculosis Mycobacterium isolated, and Among nontuberculosis Mycobacterium isolates, 60.6% were Mycobacterium avium complex, 14.1% were isolates Mycobacterium abscessus, and 12.7% were isolates Mycobacterium intracellulare. Among 526 Mycobacterium tuberculosis isolates, 81.7% isolates were susceptible to first line antibiotics, 18.3% were resistant to one or more antibiotics. Non-tuberculosis Mycobacterium isolates, all were resistant to two or more antibiotics. Multi-antibiotic resistant tuberculosis rate was show 10.2% of total specimens. Isolated Mycobacterium species, 19.2% were multi-antibiotic resistant tuberculosis, and the rate of nontuberculosis Mycobacterium resistant to isoniazid and rifampin was very highly 84.5%. Thus among acid fast bacilli culture positive cases, Mycobacterium tuberculosis and non-tuberculosis Mycobacterium were must exactly identification and antibiotic sensitivity test. It was considered to help to select of the antibiotic in preventive medicine.

• Computers and Concrete
• /
• 제12권3호
• /
• pp.261-283
• /
• 2013

This paper aims to contribute to the three-dimensional generalization of numerical prediction of crack propagation through the formulation of finite elements with embedded discontinuities. The analysis of crack propagation in two-dimensional problems yields lines of discontinuity that can be tracked in a relatively simple way through the sequential construction of straight line segments oriented according to the direction of failure within each finite element in the solid. In three-dimensional analysis, the construction of the discontinuity path is more complex because it requires the creation of plane surfaces within each element, which must be continuous between the elements. In the method proposed by Chaves (2003) the crack is determined by solving a problem analogous to the heat conduction problem, established from local failure orientations, based on the stress state of the mechanical problem. To minimize the computational effort, in this paper a new strategy is proposed whereby the analysis for tracking the discontinuity path is restricted to the domain formed by some elements near the crack surface that develops along the loading process. The proposed methodology is validated by performing three-dimensional analyses of basic problems of experimental fractures and comparing their results with those reported in the literature.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.552-557
• /
• 2004

This paper presents a disturbance observer based on an $H_{\infty}$ controller synthesis for the trajectory control of a hydraulic excavator. Compared to conventional robot manipulators driven by electrical motors, the hydraulic excavator has more nonlinear and coupled dynamics. In particular, the interactions between an excavation tool and the materials being excavated are unstructured and complex. In addition, its operating modes depend on working conditions, which make it difficult to not only derive the exact mathematical model but also design a controller systematically. In this study, the approximated linear model obtained through off-line system identification is used as nominal plant model for a disturbance observer. A disturbance observer based tracking controller which considers the effect of disturbance and model uncertainty is synthesized in $H_{\infty}$ frameworks. Simulation results are used to demonstrate the applicability of the proposed control scheme.